The effect of Al2O3, TiN and Ti (C,N) based CVD coatings on tool wear in machining metal matrix composites

被引：84

作者：

Sahin, Y ^{[1
]}

Sur, G ^{[1
]}

机构：

[1] Gazi Univ, Fac Tech Educ, Dept Mech Educ, TR-06500 Ankara, Turkey

来源：

SURFACE & COATINGS TECHNOLOGY | 2004年 / 179卷 / 2-3期

关键词：

metal matrix composite; SiCp; coated tool; wear; particle size;

D O I：

10.1016/S0257-8972(03)00802-8

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effect of Al2O3, TiN and Ti (C,N) based CVD coatings on tool wear in machining metal matrix composites containing 10 wt.% SiC particles produced by liquid metallurgy was investigated at different cutting conditions. In turning tests, various cutting speeds and two cutting tools having different chip breaker geometry were used at a constant feed rate and depth of cut. The results showed that the tool life decreased considerably with increasing particle size and cutting speed in machining the particle-reinforced composite. The wear performance of TiN-coated tool was considerably lower than that of Al2O3-coated tool in machining the composites with various particle sizes. Cutting speed was also found to be more effective in machining the composite. Moreover, it was observed that mild abrasive was the main responsible mechanism for wear of the tool. (C) 2003 Elsevier B.V. All rights reserved.

引用

页码：349 / 355

页数：7

共 50 条

[1] Wear and thermal behaviour of CVD α-Al2O3 and MTCVD Ti(C,N) coatings during machining
M'Saoubi, R.
Ruppi, S.
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2009, 58 (01) : 57 - 60
[2] Effect of the substrate treatment on the microstructure of CVD Ti(C,N)/ α-Al2O3/TiN hard coatings
Wachtler, Christiane
Wuestefeld, Christina
Sima, Michal
Pikner, Jan
Rafaja, David
[J]. SURFACE & COATINGS TECHNOLOGY, 2024, 477
[3] Growth and Properties of TiN/Al2O3/Ti(C, N)/TiN Multilayer CVD Coatings on Ti (C, N)-Based Cermet Substrates with Ni, Co and Fe Binders
Junbo Liu
Ji Xiong
Zhixing Guo
Chengtao Qin
Ya Xiao
Qianbing You
[J]. Metallurgical and Materials Transactions A, 2020, 51 : 863 - 873
[4] Growth and Properties of TiN/Al2O3/Ti(C, N)/TiN Multilayer CVD Coatings on Ti (C, N)-Based Cermet Substrates with Ni, Co and Fe Binders
Liu, Junbo
Xiong, Ji
Guo, Zhixing
Qin, Chengtao
Xiao, Ya
You, Qianbing
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (02): : 863 - 873
[5] Submicrometer Al2O3/Ti(C,O,N) composites for tool applications
Krell, A
Berger, LM
Blank, P
[J]. 22ND ANNUAL CONFERENCE ON COMPOSITES, ADVANCED CERAMICS, MATERIALS, AND STRUCTURES: A, 1998, 19 (03): : 139 - 146
[6] Preparation of α-Al2O3/TiN multilayer coating on Ti(C,N)-based cermet by laser CVD
You, Yu
Ito, Akihiko
Tu, Rong
Goto, Takashi
[J]. ADVANCED ENGINEERING CERAMICS AND COMPOSITES, 2011, 484 : 188 - 191
[7] Synthesis of Al2O3 coatings on Ti(C, N)-based cermets by microwave plasma CVD using Al(acac)3
Tu, Rong
Yuan, Yang
Guo, Litong
Li, Jun
Zhang, Song
Yang, Meijun
Li, Qizhong
Zhang, Lianmeng
Goto, Takashi
Ohmori, Hitoshi
Shi, Ji
Li, Haiwen
[J]. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2019, 16 (06) : 2265 - 2272
[8] Design and Characterization of Novel Wear Resistant Multilayer CVD Coatings with Improved Adhesion Between Al2O3 and Ti(C,N)
Garcia, Jose
Pitonak, Reinhard
Weissenbacher, Ronald
Koepf, Arno
Soldera, Flavio
Suarez, Sebastian
Miguel, Federico
Pinto, Haroldo
Kostka, Aleksander
Muecklich, Frank
[J]. ADVANCED ENGINEERING MATERIALS, 2010, 12 (09) : 929 - 934
[9] Abrasive wear of multilayer κ-Al2O3-Ti(C,N) CVD coatings on cemented carbide
Fallqvist, M.
Olsson, M.
Ruppi, S.
[J]. WEAR, 2007, 263 : 74 - 80
[10] Modeling of Wear Behavior of Al–Si/Al2O3 Metal Matrix Composites
M. Megahed
D. Saber
M. A. Agwa
[J]. Physics of Metals and Metallography, 2019, 120 : 981 - 988

← 1 2 3 4 5 →