The effect of Al2O3, TiN and Ti (C,N) based CVD coatings on tool wear in machining metal matrix composites

被引：84
|
作者：
Sahin, Y [1 ]
Sur, G [1 ]
机构：
[1] Gazi Univ, Fac Tech Educ, Dept Mech Educ, TR-06500 Ankara, Turkey
来源：
SURFACE & COATINGS TECHNOLOGY | 2004年 / 179卷 / 2-3期
关键词：
metal matrix composite; SiCp; coated tool; wear; particle size;
D O I：
10.1016/S0257-8972(03)00802-8
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of Al2O3, TiN and Ti (C,N) based CVD coatings on tool wear in machining metal matrix composites containing 10 wt.% SiC particles produced by liquid metallurgy was investigated at different cutting conditions. In turning tests, various cutting speeds and two cutting tools having different chip breaker geometry were used at a constant feed rate and depth of cut. The results showed that the tool life decreased considerably with increasing particle size and cutting speed in machining the particle-reinforced composite. The wear performance of TiN-coated tool was considerably lower than that of Al2O3-coated tool in machining the composites with various particle sizes. Cutting speed was also found to be more effective in machining the composite. Moreover, it was observed that mild abrasive was the main responsible mechanism for wear of the tool. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码：349 / 355
页数：7
相关论文
共 50 条
  • [21] Abrasive wear of texture-controlled CVD α-Al2O3 coatings
    Fallqvist, M.
    Olsson, M.
    Ruppi, S.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2007, 202 (4-7): : 837 - 843
  • [22] EELS investigation of CVD α-Al2O3, κ-Al2O3 and γ-Al2O3 coatings
    Larsson, A
    Zackrisson, J
    Halvarsson, M
    Ruppi, S
    [J]. MICROBEAM ANALYSIS 2000, PROCEEDINGS, 2000, (165): : 235 - 236
  • [23] Dry Sliding Wear Behavior of Aluminum-Based Metal Matrix Composites with Single (Al2O3) and Hybrid (Al2O3 + SiC) Reinforcements
    Show B.K.
    Mondal D.K.
    Maity J.
    [J]. Metallography, Microstructure, and Analysis, 2014, 3 (1) : 11 - 29
  • [24] Synthesis of Al2O3/Ti/TiN Functional Graded Materials by Means of Nitriding in Salts of Al2O3/Ti Composites
    Miranda-Hernandez, Jose G.
    Refugio-Garcia, Elizabeth
    Garfias-Garcia, Elizabeth
    Rocha-Rangel, Enrique
    [J]. METASTABLE AND NANOSTRUCTURED MATERIALS IV, 2011, 691 : 58 - +
  • [25] Production of Al2O3/Ti/TiN functional materials by means of nitriding in ammonia salts of Al2O3/Ti composites
    Refugio-Garcia, Elizabeth
    Miranda-Hernandez, Jose G.
    Rodriguez-Garcia, Jose A.
    Rocha-Rangel, Enrique
    [J]. JOURNAL OF CERAMIC PROCESSING RESEARCH, 2011, 12 (03): : 319 - 321
  • [26] Microstructure and wear mechanisms of texture-controlled CVD α-Al2O3 coatings
    M'Saoubi, R.
    Alm, O.
    Andersson, J. M.
    Engstrom, H.
    Larsson, T.
    Johansson-Joesaar, M. P.
    Schwind, M.
    [J]. WEAR, 2017, 376 : 1766 - 1778
  • [27] Wear Characteristic and Life of Al2O3/(W,Ti)C Ceramic Tool in Turning Iron-based P/M Composites
    Han, Lifa
    Qu, Shengguan
    [J]. ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2, 2010, 26-28 : 1052 - +
  • [28] Machining of Ox-Ox (Al2O3/Al2O3) ceramics matrix composites by ultrafast laser
    Radhakrishnan, J.
    Marimuthu, S.
    [J]. CERAMICS INTERNATIONAL, 2024, 50 (20) : 39678 - 39686
  • [29] Evaluation of Mechanical and Wear Properties of Al 5059/B4C/Al2O3 Hybrid Metal Matrix Composites
    Pranavi, Uppu
    Reddy, Pathapalli Venkateshwar
    Venukumar, Sarila
    Cheepu, Muralimohan
    [J]. JOURNAL OF COMPOSITES SCIENCE, 2022, 6 (03):
  • [30] Cumulative tool wear in machining metal matrix composites .2. Machinability
    Hung, NP
    Loh, NL
    Xu, ZM
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 58 (01) : 114 - 120
12345