Solid reaction between Al and B4C

被引：4

作者：

Wu, S. ^{[1
]}

Xiao, G. ^{[1
]}

Xue, L. ^{[1
]}

Zhai, M. ^{[1
]}

Zhu, W. ^{[1
]}

机构：

[1] Northwest A&F Univ, Coll Water Resources & Architectural Engn, Yangling 712100, Peoples R China

来源：

CANADIAN METALLURGICAL QUARTERLY | 2015年 / 54卷 / 02期

关键词：

Solid reaction; Al; B4C; Al3BC; AlB2; PLASMA SINTERED AL-ALB2; MECHANICAL-PROPERTIES; ALUMINUM; CERAMICS;

D O I：

10.1179/1879139514Y.0000000178

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In the present work, solid reaction products formed by a mixture of aluminium and boron carbide (B4C) powder heat treated under low pressure were studied. No significant reaction between B4C and Al could be detected for reaction temperatures of 600 degrees C or less. However, at 640 degrees C, and over a short treatment time (1 h), a solid reaction took place between boron carbide and aluminium with the formation of Al3BC and AlB2. Meanwhile, over a longer treatment time (36 h), the detectable product phase between boron carbide and aluminium was AlB12.

引用

页码：247 / 249

页数：3

共 50 条

[21] SOLID-STATE REACTED B4C
STIGLICH, JJ
GRAY, EG
AMERICAN CERAMIC SOCIETY BULLETIN, 1972, 51 (08): : 655 - &
[22] SOLID-STATE REACTED B4C
STIGLICH, JJ
GRAY, EG
AMERICAN CERAMIC SOCIETY BULLETIN, 1972, 51 (09): : 724 - &
[23] Reaction and its suppression of B4C with mullite
Zhao, H
Hiragushi, K
Mizota, Y
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2002, 110 (04) : 314 - 319
[24] Effect of B4C particle reinforcement on tensile properties of Al7075/B4C composites
Krishnamoorthi, K.
Arun, A. P.
Muralidaran, V. Manivel
MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 692 - 695
[25] MICROSTRUCTURE OF B4C/TIB2 COMPOSITE FABRICATED BY REACTION SINTERING OF B4C AND TIC
SASAKI, G
SUGA, T
YANAI, T
SUGANUMA, K
NIIHARA, K
NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1994, 102 (04): : 321 - 325
[26] Microstructure of B4C/TiB2 composite fabricated by reaction sintering of B4C and TiC
Sasaki, Gen
Suga, Tadatomo
Yanai, Tomohiro
Suganuma, Katsuaki
Niihara, Koichi
Journal of the Ceramic Society of Japan. International ed., 1994, 102 (04): : 320 - 323
[27] Dependence of the SHS reaction behavior and product on B4C particle size in Al-Ti-B4C and Al-TiO2-B4C systems
Zou, Binglin
Shen, Ping
Jiang, Qichuan
MATERIALS RESEARCH BULLETIN, 2009, 44 (03) : 499 - 504
[28] Effect of interfacial reaction products on the wettability and interfacial strength of B4C/Al composites
Guo, Wenbo
Hu, Qiyao
Xiao, Peng
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2022, 39 (06): : 2941 - 2948
[29] The deformation of B4C particle in the B4C/2024Al composites after high velocity impact
Zhou, Zhisong
Wu, Gaohui
Jiang, Longtao
Xu, Zhongguo
Micron, 2014, 67 : 107 - 111
[30] Microstructure and Mechanical Properties of Fine Structured B4C/2024 Al Composites with High B4C Content
Zheng, Ruixiao
Ma, Fengmei
Zhang, Yitan
Ma, Chaoli
ADVANCED ENGINEERING MATERIALS, 2017, 19 (07)

← 1 2 3 4 5 →