Dependence of the SHS reaction behavior and product on B4C particle size in Al-Ti-B4C and Al-TiO2-B4C systems

被引:23
|
作者
Zou, Binglin [1 ]
Shen, Ping [1 ]
Jiang, Qichuan [1 ]
机构
[1] Jilin Univ, Dept Mat Sci & Engn, Key Lab Automobile Mat, Changchun 130025, Peoples R China
基金
中国国家自然科学基金;
关键词
Composites; Chemical synthesis; X-ray diffraction; Diffusion; HIGH-TEMPERATURE SYNTHESIS; MAGNESIUM MATRIX COMPOSITES; COMBUSTION SYNTHESIS; TIC-TIB2/AL COMPOSITES; FABRICATION; MECHANISM; TIB2; AL;
D O I
10.1016/j.materresbull.2008.08.001
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Dependence of the combustion reaction behavior and product on the B4C particle size in the Al-Ti-B4C and Al-TiO2-B4C Systems Was investigated. The results show that in both systems, the SHS reaction kinetics is primarily controlled by diffusion. Increasing the B4C particle size not only makes the ignition and self-sustainment of the SHS reaction difficult but also decreases the wave velocity and the degree of conversion. In comparison, the dependence of the SHS reaction behavior and the resultant product on the B4C particle size is much more significant in the Al-Ti-B4C system than that in the Al-TiO2-B4C system. The reason for the different dependence behaviors was investigated based on the SHS reaction mechanisms. Crown Copyright (C) 2008 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:499 / 504
页数:6
相关论文
共 50 条
  • [1] Effect of the Ti/B4C mole ratio on the reaction products and reaction mechanism in an Al-Ti-B4C powder mixture
    Zhang, Jingjing
    Lee, Jung-Moo
    Cho, Young-Hee
    Kim, Su-Hyeon
    Yu, Huashun
    MATERIALS CHEMISTRY AND PHYSICS, 2014, 147 (03) : 925 - 933
  • [2] Effect of B4C Particle Size on the Properties of Al/(Al–B4C)/Al Functionally Gradient Material
    Yingshui Yu
    Chenglong Yao
    Yubo Zhang
    Guangye Xu
    Tingju Li
    Liwei Zhang
    Powder Metallurgy and Metal Ceramics, 2020, 58 : 737 - 742
  • [3] Effect of B4C Particle Size on the Properties of Al/(Al-B4C)/Al Functionally Gradient Material
    Yu, Yingshui
    Yao, Chenglong
    Zhang, Yubo
    Xu, Guangye
    Li, Tingju
    Zhang, Liwei
    POWDER METALLURGY AND METAL CERAMICS, 2020, 58 (11-12) : 737 - 742
  • [4] Fabrication of TiAl/B4C Composites from an Al-Ti-B4C System Reinforced by TiC, TiB2 In-situ
    Dong, Lihua
    Zhang, Weike
    Li, Jian
    Yin, Yansheng
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2, 2009, 79-82 : 477 - +
  • [5] The effect of B4C particle size on the reaction process and product in the Cu-Zr-B4C system
    Zhang, Mengxian
    Huo, Yanqiu
    Huang, Min
    Fang, Yihang
    Wang, Guping
    JOURNAL OF ASIAN CERAMIC SOCIETIES, 2015, 3 (01): : 38 - 43
  • [6] Solid reaction between Al and B4C
    Wu, S.
    Wu, S.
    Xiao, G.
    Xue, L.
    Zhai, M.
    Zhu, W.
    CANADIAN METALLURGICAL QUARTERLY, 2015, 54 (02) : 247 - 249
  • [7] Influence of B4C Particle Size on the Microstructure and Mechanical Properties of B4C/Al Composites Fabricated by Pressureless Infiltration
    Liu, Yao
    Peng, Haokai
    Wei, Longjun
    Peng, Hao
    Ma, Donglin
    Leng, Yongxiang
    METALS, 2023, 13 (08)
  • [8] Effect of B4C particle reinforcement on tensile properties of Al7075/B4C composites
    Krishnamoorthi, K.
    Arun, A. P.
    Muralidaran, V. Manivel
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 692 - 695
  • [9] Influence of B4C content and particle size on the mechanical properties of Al2O3-B4C composites
    Mohammed, Nazeer
    Naik, Ajit Kumar
    Prasad, D. K. V. D.
    Pillari, Lava Kumar
    Bichler, Lukas
    Laha, Tapas
    Roy, Siddhartha
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2025, 22 (03)
  • [10] Optimization of Al/B4C and Al/B4C/Gr MMC Drilling Using Taguchi Approach
    Ravindranath, V. M.
    Shankar, G. S. Shiva
    Basavarajappa, S.
    Suresh, R.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (10) : 11181 - 11187