Effect of La0.8Ca0.2Cr0.9Co0.1O3-δ infiltration on the LCCC-YSZ layer as an interconnector material in solid oxide fuel cells

被引：2
|
作者：
Lee, Ho-Chang [1 ]
Lee, Jiwon [1 ]
Lee, Jung-A [1 ]
Heo, Young-Woo [1 ]
Lee, Joon-Hyung [1 ]
Kim, Jeong-Joo [1 ]
机构：
[1] Kyungpook Natl Univ, Sch Mat Sci & Engn, Daegu 41566, South Korea
来源：
JOURNAL OF CERAMIC PROCESSING RESEARCH | 2020年 / 21卷 / 02期
关键词：
Sintering; Ceramics; Interconnector; Sol-gel preparation; Infiltration; STAINLESS-STEEL SUBSTRATE; DOPED LANTHANUM CHROMITE; COATING LAYER;
D O I：
10.36410/jcpr.2020.21.2.208
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Full densification of the interconnector La0.8Ca0.2Cr0.9Co0.1O3-delta (LCCC) layer is hardly achieved when it is screen-printed and cofired on a pre-sintered NiO-YSZ (yttria-stabilized zirconia, 8YSZ) substrate. In this study, the LCCC precursors with different concentrations and viscosities were prepared and infiltrated into the LCCC-YSZ layer. The phase development process and densification behavior of the LCCC were analyzed, and the optimum conditions for full densification are suggested. Through the research, we propose a method for manufacturing a dense LCCC interconnector layer.
引用
收藏
页码：208 / 212
页数：5
相关论文
共 50 条
  • [21] Ba0.9Co0.7Fe0.2Nb0.1O3 - δ as cathode material for intermediate temperature solid oxide fuel cells
    Yang, Zhibin
    Yang, Chenghao
    Jin, Chao
    Han, Minfang
    Chen, Fanglin
    ELECTROCHEMISTRY COMMUNICATIONS, 2011, 13 (08) : 882 - 885
  • [22] Effect of sintering temperature on the performance of composite La0.6Sr0.4Co0.2Fe0.8O3-Ce0.9Gd0.1O2 cathode for solid oxide fuel cells
    Solovyev, A. A.
    Ionov, I. V.
    Shipilova, A. V.
    Maloney, P. D.
    JOURNAL OF ELECTROCERAMICS, 2018, 40 (02) : 150 - 155
  • [23] Characterizations of composite cathodes with La0.6Sr0.4Co0.2Fe0.8O3-δ and Ce0.9Gd0.1O1.95 for solid oxide fuel cells
    Kim, Ju Hee
    Park, Young Min
    Kim, Taejin
    Kim, Haekyoung
    KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2012, 29 (03) : 349 - 355
  • [24] Characterizations of composite cathodes with La0.6Sr0.4Co0.2Fe0.8O3−δ and Ce0.9Gd0.1O1.95 for solid oxide fuel cells
    Ju Hee Kim
    Young Min Park
    Taejin Kim
    Haekyoung Kim
    Korean Journal of Chemical Engineering, 2012, 29 : 349 - 355
  • [25] Synthesis and characterization of La0.9Sr0.1Ga0.8Mg0.2O3-δ electrolyte for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFC)
    Kumar, M
    Nesaraj, AS
    Raj, IA
    Pattabiraman, R
    IONICS, 2004, 10 (1-2) : 93 - 98
  • [26] Synthesis and characterization of La0.9Sr0.1Ga0.8Mg0.2O3-δ electrolyte for intermediate temperature solid oxide fuel cells (ITSOFC)
    M. Kumar
    A. Samson Nesaraj
    I. Arul Raj
    R. Pattabiraman
    Ionics, 2004, 10 : 93 - 98
  • [27] Characteristics of Ba0.5Sr0.5Co0.8Fe0.2O3-δ-La0.9Sr0.1Ga0.8Mg0.2O3-δ composite cathode for solid oxide fuel cell
    Liu, Bangwu
    Zhang, Yue
    Zhang, Limin
    JOURNAL OF POWER SOURCES, 2008, 175 (01) : 189 - 195
  • [28] Fabrication of Solid Oxide Fuel Cells with a Thin (La0.9Sr0.1)0.98(Ga0.8Mg0.2)O3-δ Electrolyte on a Sr0.8La0.2TiO3 Support
    Miller, E. C.
    Gao, Z.
    Barnett, S. A.
    FUEL CELLS, 2013, 13 (06) : 1060 - 1067
  • [29] La0.8Sr0.2Cr0.98V0.02O3-δCe0.9Gd0.1O1.95-Ni anodes for solid oxide fuel cells -: Effect of microstructure and Ni content
    Madsen, Brian D.
    Barnett, Scott A.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2007, 154 (06) : B501 - B507
  • [30] Synthesis of La0.8Sr0.2Co0.8Fe 0.2O3 nanopowders and their application in solid oxide fuel cells
    Ding, Changsheng
    Lin, Hongfei
    Sato, Kazuhisa
    Hashida, Toshiyuki
    IOP Conference Series: Materials Science and Engineering, 2011, 18 (SYMPOSIUM 9B):
12345