Temperature Dependent Current-Voltage and Capacitance-Voltage Characteristics of an Au/n-Type Si Schottky Barrier Diode Modified Using a PEDOT:PSS Interlayer

被引:23
|
作者
Khurelbaatar, Zagarzusem [1 ]
Shim, Kyu-Hwan [1 ]
Choi, Jaehee [1 ]
Hong, Hyobong [2 ]
Reddy, V. Rajagopal [3 ]
Choi, Chel-Jong [1 ]
机构
[1] Chonbuk Natl Univ, Sch Semicond & Chem Engn, SPRC, Jeonju 561756, South Korea
[2] Elect & Telecommun Res Inst, IT Convergence Technol Res Lab, Taejon 306700, South Korea
[3] Sri Venkateswara Univ, Dept Phys, Tirupati 517502, Andhra Pradesh, India
基金
新加坡国家研究基金会;
关键词
Schottky barrier diode; poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS); gaussian distribution; barrier inhomogeneity; I-V; CARRIER TRANSPORT; SEMICONDUCTOR; PARAMETERS;
D O I
10.2320/matertrans.M2014263
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The temperature dependence of the current-voltage (I-V) and capacitance-voltage (C-V) characteristics of an Au/n-type Si Schottky barrier diode (SBD) with a PEDOT:PSS interlayer was investigated. The SBD parameters, such as Schottky barrier height (Phi(B)), ideality factor (n), saturation current (I-o), doping concentration (N-D), and series resistance (R-s), were obtained as a function of temperature. The Richardson constant (A**) obtained from the In(I-o/T-2) versus 1000/T plot was much less than the theoretical value for n-Si. The mean Schottky barrier height ((Phi) over bar (bo)) and standard deviation (sigma(0)) calculated using the apparent Schottky barrier height (Phi(ap)) versus 1/2kT plot were 1.26 eV and 0.15 eV, respectively. From a fit of the modified Richardson plot of In(I-0/T-2) - (q sigma)(2)/2(kT)(2) versus 1000/T, the A** was extracted as 134 A/cm(2)K(2), which was close to the theoretical value of the n-Si. The interface state densities obtained from the Au/PEDOT:PSS/n-Si SBD decreased with increasing temperature. Furthermore, the conduction mechanism dominating the reverse-bias leakage current in Au/PEDOT:PSS/n-Si SBD was described and discussed.
引用
收藏
页码:10 / 16
页数:7
相关论文
共 50 条