Effect of obstacle height on the nanofluid convection patterns inside a hollow square enclosure

This paper contains natural convection of Ag-MgO/water micropolar hybrid nanofluid in a hollow hot square enclosure equipped by four cold obstacles on the walls. The simulations were performed by the lattice Boltzmann method (LBM). The influences of Rayleigh number and volume fraction of nanoparticle on the fluid flow and heat transfer performance were studied. Moreover, the effects of some geometric parameters, such as cold obstacle height and aspect ratio, were also considered in this study. The results showed that when the aspect ratio is not large (AR=0.2 or 0.4), at low Rayleigh number (10(3)), the two secondary vortices are established in each main vortex and this kind of secondary vortex does not form at high Rayleigh number (10(6)). However, at Ra=10(6), these secondary vortices occur again in the middle two vortices at AR=0.6, which is similar to that at Ra=103. At AR=0.2, the critical Rayleigh number, when the dominated mechanism of heat transfer changes from conduction to convection, is 10(4). However, the critical Rayleigh number becomes 10(5) at AR=0.4 or 0.6. When the cold obstacle height increases, the shape of the vortices inside the enclosure changes due to the different spaces. Besides, at Ra=10(6), for different cold obstacle heights, the location of the thermal plume is different, owing to the different shapes of vortices. Accordingly, the average Nusselt number increases by increment of the Rayleigh number, nanoparticle volume fraction, cold obstacle height and aspect ratio.