Beam position monitor system for PEP-II

被引：0
|
作者：
Smith, SR [1 ]
Aiello, GR [1 ]
Hendrickson, LJ [1 ]
Johnson, RG [1 ]
Mills, MR [1 ]
Olsen, JJ [1 ]
机构：
[1] Stanford Linear Accelerator Ctr, Stanford, CA 94309 USA
来源：
PROCEEDINGS OF THE 1997 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-3: PLENARY AND SPECIAL SESSIONS ACCELERATORS AND STORAGE RINGS - BEAM DYNAMICS, INSTRUMENTATION, AND CONTROLS | 1998年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
We describe the beam position monitor system built for PEP-II, the B-factory at SLAG. The system reports beam position for bunches of between 5 x 10(8) and 8 x 10(10) electron charges, either singly or as continuous streams of bunches every 4.2 ns. Resolution at full charge is to be better than 10 microns in a single turn. Higher resolution is available via on-board multi-turn averaging. The position signal is processed in a 20 MHz bandwidth around 952 MHz. This bandwidth, rather broader than that typical of RF position monitors, allows good resolution for low charge single bunches. Additional novel features include stringent control of return losses in order to minimize cross-talk between nearby bunches which may contain very different charges. The digitizing electronics is multiplexed between the two PER-Il storage rings. Design, construction, and installation experience, as well as first results with beam are presented.
引用
收藏
页码：2122 / 2124
页数：3
相关论文
共 50 条
  • [1] Beam position monitor system for PEP-II
    Aiello, GR
    Johnson, RG
    Martin, DJ
    Mills, MR
    Olsen, JJ
    Smith, SR
    BEAM INSTRUMENTATION - PROCEEDINGS OF THE SEVENTH WORKSHOP, 1997, (390): : 341 - 349
  • [2] Design of the button beam position monitor for PEP-II
    Kurita, N
    Martin, D
    Smith, S
    Ng, C
    Nordby, M
    Perkins, C
    PROCEEDINGS OF THE 1995 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5, 1996, : 2512 - 2514
  • [3] Performance of the beam position monitor system for the SLAC PEP-II B Factory
    Johnson, RG
    Smith, SR
    Aiello, GR
    BEAM INSTRUMENTATION WORKSHOP, 1998, 451 : 395 - 403
  • [4] Calibration of the Beam-Position Monitor system for the SLAC PEP-II B Factory
    Johnson, R
    Smith, S
    Kurita, N
    Kishiyama, K
    Hinkson, J
    PROCEEDINGS OF THE 1997 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-3: PLENARY AND SPECIAL SESSIONS ACCELERATORS AND STORAGE RINGS - BEAM DYNAMICS, INSTRUMENTATION, AND CONTROLS, 1998, : 2110 - 2112
  • [5] Simulation of PEP-II beam position monitors
    Ng, CK
    Weiland, T
    Martin, D
    Smith, S
    Kurita, N
    PROCEEDINGS OF THE 1995 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5, 1996, : 2485 - 2487
  • [6] Some solved problems with the SLAC PEP-II B-Factory Beam-Position Monitor system
    Johnson, RG
    Smith, SR
    BEAM INSTRUMENTATION WORKSHOP 2000, 2000, 546 : 448 - 455
  • [7] The PEP-II high power beam dumping system
    Kulikov, A
    Seeman, J
    Zolotorev, M
    PROCEEDINGS OF THE 1995 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-5, 1996, : 2032 - 2033
  • [8] PEP-II RF SYSTEM
    HARTWIG, EC
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 1979, 26 (03) : 3621 - 3622
  • [9] PEP-II bunch-by-bunch current monitor
    Chin, MJ
    Hinkson, JA
    PROCEEDINGS OF THE 1997 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-3: PLENARY AND SPECIAL SESSIONS ACCELERATORS AND STORAGE RINGS - BEAM DYNAMICS, INSTRUMENTATION, AND CONTROLS, 1998, : 2235 - 2237
  • [10] PEP-II bunch-by-bunch current monitor
    Chin, M.J.
    Hinkson, J.A.
    Proceedings of the IEEE Particle Accelerator Conference, 1998, 2 : 2235 - 2237
12345