Achieving Excellent Properties of Cu-Ni-Si Copper Alloy by Cold Rolling and Electropulsing Aging

被引：2

作者：

Zhu, Rufei ^{[1
,2
]}

Lou, Huafen ^{[1
,2
]}

Liu, Yuning ^{[1
,2
]}

Zhang, Jianing ^{[1
,2
]}

Wang, Hu ^{[1
,2
]}

Mo, Yongda ^{[1
,2
]}

Wang, Yunpeng ^{[1
,2
]}

机构：

[1] China Copper Inst Engn & Technol, Beijing 100082, Peoples R China

[2] Kunming Met Res Inst Co LTD, Beijing Branch, Beijing 100082, Peoples R China

来源：

JOM | 2022年 / 74卷 / 12期

关键词：

ELECTRICAL-CONDUCTIVITY; MECHANICAL-PROPERTIES; MICROSTRUCTURE; EVOLUTION; BEHAVIOR; STRIPS;

D O I：

10.1007/s11837-022-05538-z

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Cold-rolled Cu-Ni-Si copper alloys were aged by electropulsing directly without the help of a furnace, and excellent strength and electrical conductivity were achieved. The strength and electrical conductivity reach 815 MPa and 38.9% IACS respectively for the sample aged by electropulsing with the frequency of 200 Hz for 10 min. The maximum electrical conductivity of samples, aged by electropulsing with the frequency of 400 Hz for 10 min, reaches 41.6% IACS. The conductivity of the sample aged at 200-400 Hz for 1 min is more than that of the sample aged by a furnace at 450 degrees C for 10 min. High-density delta-Ni2Si precipitates with size of 1-5 nm are found for the samples aged by electropulsing. Compared to the traditional aging treatment, electropulsing facilitates the diffusion of Ni and Si atoms to accelerate precipitation hardening. Additionally, cold rolling is also beneficial to the nucleation of precipitation and further improves the properties of Cu-Ni-Si alloy. Because electropulsing facilitates recrystallization at 300-500 Hz, this leads to decreased strength of copper alloy.

引用

页码：4831 / 4841

页数：11

共 50 条

[41] Effect of continuous extrusion forming on mechanical properties of aged Cu-Ni-Si alloy
Lu, Lin
Ding, Zeming
Zhang, Mengxiao
Song, Hongwu
Deng, Siying
Zhang, Shihong
[J]. MATERIALS TODAY COMMUNICATIONS, 2024, 39
[42] Fatigue Strength Evaluation of Cu-Ni-Si Alloy Strips
Mita, Natsuhiro
Omiya, Masaki
Watanabe, Shingo
Ishizaka, Norio
[J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2023, 145 (04):
[43] Dynamic embrittlement during fatigue of a Cu-Ni-Si alloy
Sun, Z.
Laitem, C.
Vincent, A.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (19-20): : 6334 - 6337
[44] Fabrication of Cu-Ni-Si alloy by melt spinning and its mechanical and electrical properties
Geng, Guihong
Wang, Dongxin
Zhang, Weiran
Liu, Limeng
Laptev, Alexander M.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 776
[45] Effect of preparation method and heat treatment on microstructure and properties of Cu-Ni-Si alloy
Tao, Shiping
Lu, Zhenlin
Xie, Hui
Zhang, Jinlong
Wei, Xin
[J]. MATERIALS LETTERS, 2022, 315
[46] Dynamic embrittlement at intermediate temperature in a Cu-Ni-Si alloy
Sun, Z.
Laitem, C.
Vincent, A.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 477 (1-2): : 145 - 152
[47] Effect of heat treatment on the electrical and mechanical properties of a Cu-Ni-Si cast alloy
Atapek, S. Hakan
von Klinski-Wetzel, Katharina
Heilmaier, Martin
[J]. MATERIALS TESTING, 2022, 64 (08) : 1103 - 1111
[48] Microstructure and mechanical properties of Cu-Ni-Si alloys
Monzen, Ryoichi
Watanabe, Chihiro
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 : 117 - 119
[49] Effect of multiple forging on the microstructure and properties of an as-cast Cu-Ni-Si alloy with high Ni and Si contents
Zhang, Jinlong
Lu, Zhenlin
Jia, Lei
Xie, Hui
Wei, Xin
Tao, Shiping
[J]. MATERIALS RESEARCH EXPRESS, 2021, 8 (12)
[50] Study on the distribution of texture and the second phase under different aging process of Cu-Ni-Si alloy
Liu, Zesheng
Chen, Yinli
Wei, He
Li, Zhichao
[J]. MATERIALS LETTERS, 2019, 236 : 292 - 294

← 1 2 3 4 5 →