Measuring the critical energy release rate in mode II of tough, structural adhesive joints using the tapered end-notched flexure (TENF) test

被引：23

作者：

Marzi, S. ^{[1
]}

机构：

[1] Fraunhofer IFAM, D-28359 Bremen, Germany

来源：

EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS | 2012年 / 206卷 / 01期

关键词：

European Physical Journal Special Topic; Crack Opening Displacement; Adhesive Joint; Initial Crack Length; Test Velocity;

D O I：

10.1140/epjst/e2012-01584-4

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

This paper shows and discusses results of the Tapered End-Notched Flexure (TENF) test, investigating the fracture behaviour of high-strength structural adhesive joints under shear loading. The TENF test has been previously applied to brittle joints by different authors and has been re-designed to be applicable to ductile adhesives in the presented work. Furthermore, the tests are performed at two velocities, a quasi-static and a dynamic one, to investigate rate effects on the fracture behaviour of the joint. All experimental work has been performed using the structural adhesive DOW Betamate 1496V.

引用

页码：35 / 40

页数：6

共 43 条

[21] Determining mode II cohesive law of Pinus pinaster by combining the end-notched flexure test with digital image correlation
Xavier, J.
Oliveira, M.
Morais, J. J. L.
de Moura, M. F. S. F.
CONSTRUCTION AND BUILDING MATERIALS, 2014, 71 : 109 - 115
[22] Evaluation of the accuracy of the four-point bend end-notched flexure test for mode II delamination toughness determination
Schuecker, C
Davidson, BD
COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (11) : 2137 - 2146
[23] Mode II fracture mechanics properties of solid wood measured by the three-point eccentric end-notched flexure test
Yoshihara, Hiroshi
ENGINEERING FRACTURE MECHANICS, 2015, 141 : 140 - 151
[24] Development of a new fracture test to identify the critical energy release rate: The Tensile Flexure test on Notched Specimen
Vandellos, Thomas
Hautier, Mathieu
Carrere, Nicolas
Huchette, Cedric
ENGINEERING FRACTURE MECHANICS, 2012, 96 : 641 - 655
[25] Resistance curve for the mode II fracture toughness of wood obtained by the end-notched flexure test under the constant loading point displacement condition
Yoshihara, H
JOURNAL OF WOOD SCIENCE, 2003, 49 (03) : 210 - 215
[26] Resistance curve for the mode II fracture toughness of wood obtained by the end-notched flexure test under the constant loading point displacement condition
Hiroshi Yoshihara
Journal of Wood Science, 2003, 49 : 210 - 215
[27] Mode II fracture toughness evaluation using four point bend, end notched flexure test
Martin, RH
Davidson, BD
PLASTICS RUBBER AND COMPOSITES, 1999, 28 (08) : 401 - 406
[28] Experimental and numerical benchmark study of mode II interlaminar fracture toughness of unidirectional GFRP laminates under shear loading using the end-notched flexure (ENF) test
Gliszczynski, A.
Wiacek, N.
COMPOSITE STRUCTURES, 2021, 258
[29] Numerical evaluation of the effects of friction and geometric nonlinearities on the energy release rate in three- and four-point bend end-notched flexure tests
Sun, Xuekun
Davidson, Barry D.
ENGINEERING FRACTURE MECHANICS, 2006, 73 (10) : 1343 - 1361
[30] Mixed mode fracture characterization of GFRP-concrete bonded interface using four-point asymmetric end-notched flexure test
Liu, Qinghui
Qiao, Pizhong
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2017, 92 : 155 - 166

← 1 2 3 4 5 →