Development of a new fracture test to identify the critical energy release rate: The Tensile Flexure test on Notched Specimen

被引：5

作者：

Vandellos, Thomas ^{[1
]}

Hautier, Mathieu ^{[1
]}

Carrere, Nicolas ^{[1
]}

Huchette, Cedric ^{[1
]}

机构：

[1] Off Natl Etud & Rech Aerosp, F-92322 Chatillon, France

来源：

ENGINEERING FRACTURE MECHANICS | 2012年 / 96卷

关键词：

Delamination; Fiber reinforced materials; Toughness testing; Fracture mechanics; I+II INTERLAMINAR FRACTURE; MODE-II; DELAMINATION FRACTURE; COMPOSITES; TOUGHNESS; BEAM;

D O I：

10.1016/j.engfracmech.2012.09.026

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Delamination is one of the most critical damage mechanisms in laminated composites. A fracture test, referenced in the following as Tensile Flexure test on Notched Specimen, is proposed in this work to characterize the propagation of delamination. After the description of the experimental procedure, experimental results on carbon/epoxy specimens are presented to describe the capabilities and advantages of the test to characterize delamination. Then, a new propagation law is proposed to describe the evolution of the fracture toughness. Finally, a non-deterministic analysis is performed to determine the influence of the measured parameters on the toughness identification. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：641 / 655

页数：15

共 50 条

[1] Determination of Fracture Energy of Early Age Concrete through a Uniaxial Tensile Test on an Un-Notched Specimen
Ren, Dongya
Houben, Lambert
MATERIALS, 2020, 13 (03)
[2] Bone fracture characterization using the end notched flexure test
Dourado, N.
Pereira, F. A. M.
de Moura, M. F. S. F.
Morais, J. J. L.
Dias, M. I. R.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2013, 33 (01): : 405 - 410
[3] Measuring the critical energy release rate in mode II of tough, structural adhesive joints using the tapered end-notched flexure (TENF) test
Marzi, S.
EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 2012, 206 (01): : 35 - 40
[4] Measuring the critical energy release rate in mode II of tough, structural adhesive joints using the tapered end-notched flexure (TENF) test
S. Marzi
The European Physical Journal Special Topics, 2012, 206 : 35 - 40
[5] Determination of eta-factor for an end-notched flexure test specimen
Rhee, KY
JOURNAL OF MATERIALS SCIENCE LETTERS, 1997, 16 (05) : 386 - 388
[6] THE PENINSULA BLISTER TEST - A HIGH AND CONSTANT STRAIN-ENERGY RELEASE RATE FRACTURE SPECIMEN FOR ADHESIVES
DILLARD, DA
BAO, Y
JOURNAL OF ADHESION, 1991, 33 (04): : 253 - 271
[7] Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test
Boyano, A.
De Gracia, J.
Arrese, A.
Mujika, F.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2017, 87 : 99 - 109
[8] DEVELOPMENT OF A FULLY AUTOMATED TENSILE AND FLEXURE TEST SYSTEM
SCOTT, RL
RIEKE, JK
ACS SYMPOSIUM SERIES, 1989, 404 : 45 - 53
[9] An unsymmetric end-notched flexure test for interfacial fracture toughness determination
Sundararaman, V
Davidson, BD
ENGINEERING FRACTURE MECHANICS, 1998, 60 (03) : 361 - 377
[10] NOTCHED BEAM TEST FOR FRACTURE ENERGY MEASUREMENT OF CERAMICS
HARTLINE, SD
ROSEBROOKS, NB
BRADT, RC
BAUMGARTNER, HR
AMERICAN CERAMIC SOCIETY BULLETIN, 1972, 51 (04): : 336 - +

← 1 2 3 4 5 →