Influence of compositional variations on microstructural evolution, mechanical properties and fluidity of secondary foundry alloy AlSi9Cu3

被引：5

作者：

Pucher, P. ^{[1
]}

Antrekowitsch, H. ^{[1
]}

Boettcher, H. ^{[2
]}

Kaufmann, H. ^{[3
]}

Uggowitzer, P. J. ^{[4
]}

机构：

[1] Univ Leoben, Dept Met, A-8700 Leoben, Austria

[2] AMAG Casting GmbH, A-5282 Ranshofen, Austria

[3] Austria Met AG, A-5282 Ranshofen, Austria

[4] ETH, Dept Mat, Lab Met Phys & Technol, CH-8093 Zurich, Switzerland

来源：

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH | 2010年 / 23卷 / 06期

关键词：

Aluminium foundry alloy; Fluidity; Mechanical properties; Compositional variations; Thermodynamic calculations; ALUMINUM-SILICON ALLOYS; CASTING ALLOYS; IRON-INTERMETALLICS; AS-CAST; CASTABILITY; BEHAVIOR; POROSITY;

D O I：

10.1179/136404610X12682097603803

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The combined effect of the main alloying elements on the mechanical properties and fluidity of the secondary foundry alloy AlSi9Cu3 has been investigated. Systematic compositional variations within the alloy's tolerance limit illustrate the broad spectrum of attainable properties. The yield strength in the as cast condition can be adjusted from 100 to 200 MPa, while the elongation to fracture can be simultaneously varied between 0.35% and almost 4%. Additionally, variation in fluidity by more than 100% can be achieved. The microstructure-property relationship is interpreted in the light of thermodynamic calculations that reveal a significant mutual interaction of the alloying elements.

引用

页码：375 / 383

页数：9

共 50 条

[1] The influence of Sr, Mg and Cu addition on the microstructural properties of a secondary AlSi9Cu3(Fe) die casting alloy
Fabrizi, Alberto
Ferraro, Stefano
Timelli, Giulio
MATERIALS CHARACTERIZATION, 2013, 85 : 13 - 25
[2] Influence of Remelting AlSi9Cu3 Alloy with Higher Iron Content on Mechanical Properties
Matejka, M.
Bolibruchova, D.
ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (03) : 25 - 30
[3] Influence of ultrasonic melt treatment on microstructure and mechanical properties of AlSi9Cu3 alloy
Puga, H.
Costa, S.
Barbosa, J.
Ribeiro, S.
Prokic, M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (11) : 1729 - 1735
[4] DEPENDENCE OF MECHANICAL PROPERTIES ON Cu CONTENT IN AlSi9Cu3(Fe) ALLOY
Voncina, Maja
Mocnik, Natasa
Nagode, Ales
Stoic, Antun
Bizjak, Milan
TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2017, 24 : 229 - 231
[5] The Influence of Cooling Rate on Microstructure and Mechanical Properties of AlSi9Cu3
Zbontar, Matic
Petric, Mitja
Mrvar, Primoz
METALS, 2021, 11 (02) : 1 - 13
[6] The Influence of Foundry Scrap Returns on Chemical Composition and Microstructure Development of AlSi9Cu3 Alloy
Smalc, Jan
Voncina, Maja
Mrvar, Primoz
Balasko, Tilen
Krutis, Vladimir
Petric, Mitja
CRYSTALS, 2023, 13 (05)
[7] Mechanical properties and casting characteristics of the secondary aluminum alloy AlSi9Cu3(Fe) (A226)
Pucher, P.
Boettcher, H.
Kaufmann, H.
Antrekowitsch, H.
Uggowitzer, P. J.
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, 2011, : 237 - 244
[8] The Influence of Remelting on the Properties of AlSi9Cu3 Alloy with Higher Iron Content
Kasinska, Justyna
Bolibruchova, Dana
Matejka, Marek
MATERIALS, 2020, 13 (03)
[9] RELATION BETWEEN MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CAST ALUMINUM ALLOY AlSi9Cu3
Panuskova, M.
Tillova, E.
Chalupova, M.
STRENGTH OF MATERIALS, 2008, 40 (01) : 98 - 101
[10] Relation between mechanical properties and microstructure of cast aluminum alloy AlSi9Cu3
M. Panušková
E. Tillová
M. Chalupová
Strength of Materials, 2008, 40 : 98 - 101

← 1 2 3 4 5 →