DEPENDENCE OF MECHANICAL PROPERTIES ON Cu CONTENT IN AlSi9Cu3(Fe) ALLOY

被引：10
|
作者：
Voncina, Maja [1 ]
Mocnik, Natasa [1 ]
Nagode, Ales [1 ]
Stoic, Antun [2 ]
Bizjak, Milan [1 ]
机构：
[1] Univ Ljubljana, Fac Nat Sci & Engn, Dept Mat & Met, Askerceva C 12, Ljubljana 1000, Slovenia
[2] JJ Strossmayer Univ Osijek, Mech Engn Fac Slavonski Brod, Trg Ivane Brlic Mazuranic 2, Slavonski Brod 35000, Croatia
来源：
TEHNICKI VJESNIK-TECHNICAL GAZETTE | 2017年 / 24卷
关键词：
Al-Si-Cu alloy; corrosion resistance; mechanical properties; MICROSTRUCTURE; ALUMINUM;
D O I：
10.17559/TV-20140922143741
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AlSi9Cu3(Fe) aluminium alloy is one of the most commonly used casting aluminium alloys because their utility is based on good mechanical properties. Production often leads to deviations of maximum levels for certain alloying elements, particularly copper. Since mechanical properties of the final products of these alloys strongly depend on the concentration of copper in the alloy, various concentrations of copper were added to the basic alloy whereas the chemical composition was monitored using an optical emission spectrometer, measuring Brinell hardness and doing tensile tests. Moreover, the impacts of copper on oxidizing and corrosion resistance of the experimental alloys were analysed. The alloy with 3 wt. % Cu showed the best results.
引用
收藏
页码：229 / 231
页数：3
相关论文
共 50 条
  • [1] Influence of Remelting AlSi9Cu3 Alloy with Higher Iron Content on Mechanical Properties
    Matejka, M.
    Bolibruchova, D.
    ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (03) : 25 - 30
  • [2] The Effect of Vacuum on the Mechanical Properties of Die Cast Aluminum AlSi9Cu3(Fe) Alloy
    Szalva, Peter
    Orbulov, Imre Norbert
    INTERNATIONAL JOURNAL OF METALCASTING, 2019, 13 (04) : 853 - 864
  • [3] The Effect of Vacuum on the Mechanical Properties of Die Cast Aluminum AlSi9Cu3(Fe) Alloy
    Péter Szalva
    Imre Norbert Orbulov
    International Journal of Metalcasting, 2019, 13 : 853 - 864
  • [4] The Influence of Remelting on the Properties of AlSi9Cu3 Alloy with Higher Iron Content
    Kasinska, Justyna
    Bolibruchova, Dana
    Matejka, Marek
    MATERIALS, 2020, 13 (03)
  • [5] Effect of Heat Treatment on Machining Properties of the AlSi9Cu3(Fe) Alloy
    Wieronski, P.
    Pezda, J.
    Ponikwia, L.
    ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (03) : 137 - 140
  • [6] Mechanical properties and casting characteristics of the secondary aluminum alloy AlSi9Cu3(Fe) (A226)
    Pucher, P.
    Boettcher, H.
    Kaufmann, H.
    Antrekowitsch, H.
    Uggowitzer, P. J.
    TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, 2011, : 237 - 244
  • [7] Influence of ultrasonic melt treatment on microstructure and mechanical properties of AlSi9Cu3 alloy
    Puga, H.
    Costa, S.
    Barbosa, J.
    Ribeiro, S.
    Prokic, M.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (11) : 1729 - 1735
  • [8] RELATION BETWEEN MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CAST ALUMINUM ALLOY AlSi9Cu3
    Panuskova, M.
    Tillova, E.
    Chalupova, M.
    STRENGTH OF MATERIALS, 2008, 40 (01) : 98 - 101
  • [9] INFLUENCE OF COPPER CONTENT ON MICROSTRUCTURE DEVELOPMENT OF AlSi9Cu3 ALLOY
    Brodarac, Z. Zovko
    Dolic, N.
    Unkic, F.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2014, 50 (01) : 53 - 60
  • [10] Relation between mechanical properties and microstructure of cast aluminum alloy AlSi9Cu3
    M. Panušková
    E. Tillová
    M. Chalupová
    Strength of Materials, 2008, 40 : 98 - 101
12345