Influence of compositional variations on microstructural evolution, mechanical properties and fluidity of secondary foundry alloy AlSi9Cu3

被引：5
|
作者：
Pucher, P. [1 ]
Antrekowitsch, H. [1 ]
Boettcher, H. [2 ]
Kaufmann, H. [3 ]
Uggowitzer, P. J. [4 ]
机构：
[1] Univ Leoben, Dept Met, A-8700 Leoben, Austria
[2] AMAG Casting GmbH, A-5282 Ranshofen, Austria
[3] Austria Met AG, A-5282 Ranshofen, Austria
[4] ETH, Dept Mat, Lab Met Phys & Technol, CH-8093 Zurich, Switzerland
来源：
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH | 2010年 / 23卷 / 06期
关键词：
Aluminium foundry alloy; Fluidity; Mechanical properties; Compositional variations; Thermodynamic calculations; ALUMINUM-SILICON ALLOYS; CASTING ALLOYS; IRON-INTERMETALLICS; AS-CAST; CASTABILITY; BEHAVIOR; POROSITY;
D O I：
10.1179/136404610X12682097603803
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The combined effect of the main alloying elements on the mechanical properties and fluidity of the secondary foundry alloy AlSi9Cu3 has been investigated. Systematic compositional variations within the alloy's tolerance limit illustrate the broad spectrum of attainable properties. The yield strength in the as cast condition can be adjusted from 100 to 200 MPa, while the elongation to fracture can be simultaneously varied between 0.35% and almost 4%. Additionally, variation in fluidity by more than 100% can be achieved. The microstructure-property relationship is interpreted in the light of thermodynamic calculations that reveal a significant mutual interaction of the alloying elements.
引用
收藏
页码：375 / 383
页数：9
相关论文
共 50 条
  • [31] The Study of Phase Transformations of AlSi9Cu3 Alloy by DSC Method
    Piatkowski, J.
    Przeliorz, R.
    Gontarczyk, A.
    ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (04) : 109 - 112
  • [32] Crystallization of the Structural Components of Multiple Remelted AlSi9Cu3 Alloy
    Matejka, M.
    Bolibruchova, D.
    Kuris, M.
    ARCHIVES OF FOUNDRY ENGINEERING, 2021, 21 (02) : 41 - 45
  • [33] THE AlSi9Cu3 ALLOY PROCESSED BY THE SELECTIVE LASER MELTING TECHNOLOGY
    Vasakova, Kristyna
    Pantelejev, Libor
    Koutny, Daniel
    31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, : 792 - 797
  • [34] Analysis of the impact of the change of primary and secondary AlSi9Cu3 alloy ratio in the batch on its performance
    Bolibruchová D.
    Matejka M.
    Kuriš M.
    Manufacturing Technology, 2019, 19 (05): : 734 - 739
  • [35] Experimental and Simulation Tests on the Impact of the Conditions of Casting Solidification from AlSi9Cu3 Alloy on their Structure and Mechanical Properties
    Hajkowski, J.
    Ignaszak, Z.
    ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (01) : 167 - 175
  • [36] EFFECT OF AlTi5B1 AND AlSr10 ADDITIONS ON THE FLUIDITY OF THE AlSi9Cu3 ALLOY
    Steinacher, Matej
    Zupanic, Franc
    Petric, Mitja
    Mrvar, Primoz
    MATERIALI IN TEHNOLOGIJE, 2014, 48 (06): : 917 - 921
  • [37] Microstructural, microscratch and nanohardness mechanical characterization of secondary commercial HPDC AlSi9Cu3-type alloy
    Reyes, Antonio Enrique Salas
    Guerrero, Gerardo Altamirano
    Ortiz, Gabriel Rodriguez
    Gasga, Jose Reyes
    Robledo, Jaime Francisco Garcia
    Flores, Octavio Lozada
    Costa, Patricia Sheilla
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 8266 - 8282
  • [38] Effects of Bismuth on the Microstructure and Mechanical Properties of AlSi9Cu3(Fe) Die Casting Alloys
    Ferraro, Stefano
    Timelli, Giulio
    Fabrizi, Alberto
    LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 59 - 63
  • [39] Mechanical characterization of the AlSi9Cu3 cast alloy under distinct stress states and thermal conditions
    Gain, S.
    Silva, T. E. F.
    Jesus, A. M. P.
    Cavaleiro, A.
    Rosa, P. A. R.
    Reis, A.
    ENGINEERING FRACTURE MECHANICS, 2019, 216
  • [40] Influence of income on the evolution of the mechanical characteristics and microstructure of the foundry alloy AlSi7Zn3Cu2Mg
    Hakem, Ahmed
    JOURNAL OF MATERIALS AND ENGINEERING STRUCTURES, 2018, 5 (03): : 289 - 304
12345