Analysis of T-Peel Weld-bonded Joint with Single Overlap Support

被引：1
|
作者：
Al-Samhan, Ali M. [1 ]
机构：
[1] King Saud Univ, Coll Engn, Dept Ind Engn, Riyadh 11421, Saudi Arabia
来源：
ADVANCED ENGINEERING MATERIALS, PTS 1-3 | 2011年 / 194-196卷
关键词：
Peel Joint; Overlapped Weld-Bond Joint; Weld-Bond Structure; STRESSES;
D O I：
10.4028/www.scientific.net/AMR.194-196.2276
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Bonded structure are commonly of three types, purely adhesive bonded, weld-bonded and adhesive/mechanical structures. Peel and overlapped joints are commonly used in the development of bonded structures. T-Peel bonded joint has week tensile strength load compared to double-overlap bonded joint. The present work aimed to predicting the strength of weld-bonded T-peel joint with single overlap weld-bond support plate using finite-element method. For comparison purposes, weld-bond T-peel joint without support is included in this study. It was found the peak stress is concentrated towards the inner far end of T-peel mid-layer of adhesive and through weld-nugget center. The introduction of single overlap weld-bond support for T-peel joint strengthen the joint by 500%.
引用
收藏
页码：2276 / 2283
页数：8
相关论文
共 50 条
  • [41] Non-destructive evaluation of the adhesive fillet size in a T-peel joint using ultrasonic lamb waves and a linear network for data discrimination
    [J]. Bork, U., 1600, Institute of Physics Publishing Ltd, Bristol, United Kingdom (06):
  • [42] Investigating strength increasing modifications to a friction stir welded AA7075 T-peel joint’s exit location: a modeling led study
    Kranthi Balusu
    Hrishikesh Das
    Shivakant Shukla
    Ayoub Soulami
    Piyush Upadhyay
    [J]. The International Journal of Advanced Manufacturing Technology, 2024, 130 : 5591 - 5600
  • [43] Joining mechanism and mechanical properties of metallic bump assisted weld-bonded (MBaWB) joints of AA6061-T6 and bare DP590
    Zhao, Hang
    Zhang, Guotao
    Zhang, Qingxin
    Zhang, Chaoqun
    Li, Yongbing
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2020, 50 : 204 - 215
  • [44] THE RELATIONSHIP BETWEEN WELDING TEMPERATURE AND T-PEEL STRENGTH OF HEAT-WELDED SEAMS IN SINGLE-PLY ROOF-COVERINGS
    OBA, K
    BJORK, F
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 1993, 7 (09) : 987 - 999
  • [45] A Novel Adaptation of the T-Peel Bimetal Bond Test Based on the Thin Film Bonding Theory Using Cold Roll Bonded AlSn/Steel Bimetal Laminates
    Da Silva, Laurie
    El-Sharif, Mahmoud
    Chisholm, Colin
    Laidlaw, Stuart
    [J]. ADVANCES IN MANUFACTURING TECHNOLOGY XXX, 2016, 3 : 161 - 166
  • [46] Investigating strength increasing modifications to a friction stir welded AA7075 T-peel joint's exit location: a modeling led study
    Balusu, Kranthi
    Das, Hrishikesh
    Shukla, Shivakant
    Soulami, Ayoub
    Upadhyay, Piyush
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (11-12): : 5591 - 5600
  • [47] Experimental and numerical analysis of adhesively-bonded T joints under peel loads
    Carneiro, M. A. S.
    Campilho, R. D. S. G.
    Silva, F. J. G.
    [J]. MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 51 - 58
  • [48] Nonlinear stress analysis in adhesively bonded single-lap joint
    Sayman, Onur
    Ozel, Adnan
    Pasinli, Ahmet
    Ozen, Mustafa
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2013, 27 (21) : 2304 - 2314
  • [49] Analysis of an adhesively bonded single lap joint subjected to eccentric loading
    Anyfantis, Konstantinos N.
    Tsouvalis, Nicholas G.
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2013, 41 : 41 - 49
  • [50] Free vibration analysis and design of an adhesively bonded corner joint with double support
    Apalak, M. Kemal
    Ekici, Recep
    Yildirim, Mustafa
    [J]. JOURNAL OF ADHESION, 2007, 83 (11): : 957 - 986
12345