Analysis of T-Peel Weld-bonded Joint with Single Overlap Support

被引：1
|
作者：
Al-Samhan, Ali M. [1 ]
机构：
[1] King Saud Univ, Coll Engn, Dept Ind Engn, Riyadh 11421, Saudi Arabia
来源：
ADVANCED ENGINEERING MATERIALS, PTS 1-3 | 2011年 / 194-196卷
关键词：
Peel Joint; Overlapped Weld-Bond Joint; Weld-Bond Structure; STRESSES;
D O I：
10.4028/www.scientific.net/AMR.194-196.2276
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Bonded structure are commonly of three types, purely adhesive bonded, weld-bonded and adhesive/mechanical structures. Peel and overlapped joints are commonly used in the development of bonded structures. T-Peel bonded joint has week tensile strength load compared to double-overlap bonded joint. The present work aimed to predicting the strength of weld-bonded T-peel joint with single overlap weld-bond support plate using finite-element method. For comparison purposes, weld-bond T-peel joint without support is included in this study. It was found the peak stress is concentrated towards the inner far end of T-peel mid-layer of adhesive and through weld-nugget center. The introduction of single overlap weld-bond support for T-peel joint strengthen the joint by 500%.
引用
收藏
页码：2276 / 2283
页数：8
相关论文
共 50 条
  • [31] Comparative analysis of resistance spot welded and weld bonded joint of al 6082-T651
    Mandal, Anand Kumar
    Meena, M. L.
    Chaudhary, Arun Kumar
    Patidar, Arvind
    Gupta, B. L.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 4079 - 4085
  • [32] Influence of Adhesive in FSW: Investigation on Fatigue Behavior of Welded, Weld-Bonded, and Adhesive-Bonded Joints in Aluminum AA 6082 T6
    Lertora, Enrico
    Mandolfino, Chiara
    Pizzorni, Marco
    Gambaro, Carla
    [J]. MATERIALS, 2019, 12 (08)
  • [33] Weld bonding process analysis for tensile shear strength and peel strength of weld bonded joints of dissimilar steel sheets
    Boriwal, L.
    Sarviya, R. M.
    Mahapatra, M. M.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2019, 233 (04) : 709 - 717
  • [34] Stress and stiffness analysis of weld-bonded box-section beams subjected to bending moment (The case of considering shearing force)
    Fujita, Sachiko
    Mizuta, Tadaki
    Asano, Akio
    Sato, Ryoichi
    [J]. Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1997, 63 (614): : 2167 - 2173
  • [35] Corrosion behaviour of friction-bit-joined and weld-bonded AA7075-T6/galvannealed DP980
    Lim, Yong Chae
    Squires, Lile
    Pan, Tsung-Yu
    Miles, Michael
    Keum, Jong Kahk
    Song, Guang-Ling
    Wang, Yanli
    Feng, Zhili
    [J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2017, 22 (06) : 455 - 464
  • [36] The Parametric Analysis of a Bonded Overlap Joint Resulting in Design Guidelines and a Representation for Finite Element Analysis
    Pearson, I. T.
    [J]. STRAIN, 2001, 37 (03) : 113 - 121
  • [37] NONDESTRUCTIVE EVALUATION OF THE ADHESIVE FILLET SIZE IN A T-PEEL JOINT USING ULTRASONIC LAMB WAVES AND A LINEAR-NETWORK FOR DATA DISCRIMINATION
    BORK, U
    CHALLIS, RE
    [J]. MEASUREMENT SCIENCE AND TECHNOLOGY, 1995, 6 (01) : 72 - 84
  • [38] Optimal design of an adhesively-bonded corner joint with single support based on the free vibration analysis
    Apalak, M. Kemal
    Ekici, Recep
    Yildirim, Mustafa
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2006, 20 (13) : 1507 - 1528
  • [39] Optimal design of an adhesively-bonded corner joint with single support based on the free vibration analysis
    Department of Mechanical Engineering, Erciyes University, Kayseri 38039, Turkey
    不详
    [J]. J Adhes Sci Technol, 2006, 13 (1507-1528):
  • [40] Relationship between welding temperature and T-peel strength of heat-welded seams in single-ply roof-coverings
    Oba, Koichi
    Bjork, Folke
    [J]. Journal of Adhesion Science and Technology, 1993, 7 (09): : 987 - 999
12345