Impact of Lambda Value on Combustion Characteristics and Emissions of Syngas-Diesel Dual-Fuel Engine

被引:3
|
作者
Mahmood, Hussein A. [1 ]
Al-Sulttani, Ali O. [2 ]
Mousa, Naseer A. [1 ]
Attia, Osam H. [1 ]
机构
[1] Univ Baghdad, Dept Reconstruct & Projects, Baghdad, Iraq
[2] Univ Baghdad, Coll Engn, Dept Water Resources Engn, Baghdad, Iraq
关键词
CFD; Combustion; Emission; Lambda; Syngas-diesel dual-fuel engine; CHEMICAL-KINETICS; PERFORMANCE; CFD; OPTIMIZATION; BLENDS; GAS;
D O I
10.14716/ijtech.v13i1.5060
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A deep understanding of the ignition characteristics of syngas-diesel under different lambda values is essential for the application of dual-fuel combustion. In this study, the effect of increasing the lambda value was examined along with the emission characteristics and engine performance of syngas-diesel dual-fuel engines under a constant syngas-to-diesel substitution ratio of 52% at 2000 rpm engine speed. The work involved computational fluid dynamics analysis related to combustion for a four-stroke single-cylinder direct-injection engine. Combustion analysis was carried out using ANSYS Workbench (FLUENT) V16.1 software. According to the simulation results, the maximum pressure, temperature, and nitric oxide emission inside the combustion chamber increased with each increase in the value of lambda, while the emission of carbon dioxide and carbon monoxide decreased inside the engine.
引用
收藏
页码:179 / 189
页数:11
相关论文
共 50 条
  • [41] Study on combustion characteristics of a methanol-diesel dual-fuel compression ignition engine
    Wang, L-J
    Song, R-Z
    Zou, H-B
    Liu, S-H
    Zhou, L-B
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2008, 222 (D4) : 619 - 627
  • [42] Effect of Syngas Composition on the Combustion and Emissions Characteristics of a Syngas/Diesel RCCI Engine
    Kousheshi, Navid
    Yari, Mortaza
    Paykani, Amin
    Mehr, Ali Saberi
    de la Fuente, German F.
    ENERGIES, 2020, 13 (01)
  • [43] Effects of ammonia energy fraction and diesel injection timing on combustion and emissions of an ammonia/diesel dual-fuel engine
    Yousefi, Amin
    Guo, Hongsheng
    Dev, Shouvik
    Liko, Brian
    Lafrance, Simon
    FUEL, 2022, 314
  • [44] Implementation of various injection rate shapes in an ammonia/diesel dual-fuel engine with special emphasis on combustion and emissions characteristics
    Shi, Cheng
    Cheng, Tengfei
    Yang, Xiyu
    Zhang, Zheng
    Duan, Ruiling
    Li, Xujia
    ENERGY, 2024, 304
  • [45] Numerical study of combustion characteristics and emissions of a diesel-methane dual-fuel engine for a wide range of injection timings
    Dai, Xingyi
    Singh, Satbir
    Krishnan, Sundar R.
    Srinivasan, Kalyan K.
    INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2020, 21 (05) : 781 - 793
  • [46] Effects of ammonia energy fraction on combustion stability and emissions characteristics of naturally aspired industrial dual-fuel diesel engine
    Tutak, Wojciech
    Jamrozik, Arkadiusz
    Grab-Rogali, Karol
    Pyrc, Micha l
    ENERGY CONVERSION AND MANAGEMENT, 2024, 314
  • [47] Diesel-hydrogen dual-fuel combustion and its impact on unregulated gaseous emissions and particulate emissions under different engine loads and engine speeds
    Zhou, J. H.
    Cheung, C. S.
    Zhao, W. Z.
    Leung, C. W.
    ENERGY, 2016, 94 : 110 - 123
  • [48] Syngas-diesel dual-fuel engine performance using H2/CO top gases from the steel industry furnaces
    Ali, Kabbir
    Ali, Mohamed I. Hassan
    ENERGY CONVERSION AND MANAGEMENT, 2024, 301
  • [49] Optimization of the Performance and Emissions of a Dual-Fuel Diesel Engine Using LPG as the Fuel
    Tarigonda, Hariprasad
    Reddy, R. Meenakshi
    Anjaneyulu, B.
    Dharmalingam, G.
    Reddy, D. Raghu rami
    Narasimhamu, K.L.
    Lecture Notes in Networks and Systems, 2023, 649 LNNS : 510 - 531
  • [50] PERFORMANCE STUDY OF IMITATED SYNGAS IN A DUAL-FUEL COMPRESSION IGNITION DIESEL ENGINE
    Mahgoub, Bahaaddein K. M.
    Sulaiman, S. A.
    Karim, Z. A. Abdul
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2015, 11 : 2282 - 2293