Optimization of Cutting Process Parameters on AL6061 Using ANOVA and TAGUCHI Method

被引：0
|
作者：
Niranjan, D. B. [1 ]
Shivashankar, G. S. [1 ]
Rao, Sreenivas K., V [1 ]
Praveen, R. [2 ]
机构：
[1] SIT, Dept Mech Engn, Tumkur 572103, Karnataka, India
[2] PESITM, Dept Mech Engn, Shimoga 577204, Karnataka, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 10期
关键词：
Surface roughness; Material removal rate; ANOVA; Taguchi method;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Aluminium is the most abundant metal in the Earth's crust and it is also the second most widely used metal in the world. It has a very good machinability index and there is a need to increase the production while reducing the cost. In this research work, an attempt is made to optimize the cutting parameters such as cutting speed, feed rate and depth of cut in the turning operation of Aluminium Alloy 6061 T6 cylindrical rods using Taguchi method and Analysis of Variance (ANOVA). Better quality of the surface finish is obtained with cutting speed 429 m/min, feed rate 0.05mm/min and depth of cut 1mm. These process parameters are considered as optimum process parameters (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：10845 / 10849
页数：5
相关论文
共 50 条
  • [31] Optimization and Prediction of Parameters in Face Milling of Al-6061 Using Taguchi and ANN Approach
    Sukumar, M. S.
    Ramaiah, P. Venkata
    Nagarjuna, A.
    [J]. 12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 365 - 371
  • [32] The Effect of Process Parameters on the Microstructure and Mechanical Properties of Semisolid Cast Al6061
    Hajihashemi, Mahdi
    Niroumand, Behzad
    Shamanian, Morteza
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2015, 46 (02): : 780 - 792
  • [33] Optimization of Effects of Cutting Parameters and Cutting Tool Path by using Grey Based Taguchi Method
    Ay, M.
    Etyemez, A.
    [J]. ACTA PHYSICA POLONICA A, 2018, 134 (01) : 125 - 128
  • [34] The Effect of Process Parameters on the Microstructure and Mechanical Properties of Semisolid Cast Al6061
    Mahdi Hajihashemi
    Behzad Niroumand
    Morteza Shamanian
    [J]. Metallurgical and Materials Transactions B, 2015, 46 : 780 - 792
  • [35] Optimization of Lathe Cutting Parameters Using Taguchi Method and Grey Relational Analysis
    Jian, Bo-Lin
    Wang, Cheng-Chi
    Yau, Her-Terng
    Wu, Li-Wei
    Tian, An-Hong
    [J]. SENSORS AND MATERIALS, 2020, 32 (03) : 843 - 858
  • [36] Experimental optimization of cutting parameters in turning of brass alloy using Taguchi method
    Krishnan, J. Yadu
    Sundar, S. Poorna
    Karthikeyan, L.
    Ajay, C. Veera
    Manisekar, K.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 42 : 377 - 382
  • [37] Optimization of Process Parameters of Hot Extrusion of SiC/Al 6061 Composite Using Taguchi's Technique and Upper Bound Technique
    Venkatesh, C.
    Venkatesan, R.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (01) : 85 - 92
  • [38] Taguchi based GRA-PCA hybrid optimization for the forming of AL6061 alloy in automotive applications
    Swapna, Dhulipalla
    Srinivasa Rao, Chalamalasetti
    Sameer Kumar, Devarakonda
    Radhika, Sajja
    [J]. SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI, 2022, 40 (04): : 742 - 754
  • [39] Optimization of Machining Parameters for Turning of Al6061 using Robust Design Principle to minimize the surface roughness
    Deepak, D.
    Rajendra, B.
    [J]. INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING, SCIENCE AND TECHNOLOGY (ICETEST - 2015), 2016, 24 : 372 - 378
  • [40] OPTIMIZATION OF FRICTION STIR WELDING PROCESS PARAMETERS TO JOIN AL 5052 AND AL 6061 ALLOY PLATES USING GREY-TAGUCHI TECHNIQUE
    Sandeep, R.
    Sudhakara, D.
    Prasanthi, G.
    [J]. PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1, 2017,
12345