A study on fretting fatigue characteristics of Inconel 690 at high temperature

被引：37
|
作者：
Kwon, Jae-do [2 ]
Jeung, Han-kyu [1 ]
Chung, Il-sup [2 ]
Yoon, Dong-hwan [3 ]
Park, Dae-kyu [4 ]
机构：
[1] Yeungnam Univ, Grad Sch Mech Engn, Kyongsan 712749, South Korea
[2] Yeungnam Univ, Dept Mech Engn, Kyongsan 712749, South Korea
[3] Korea Aerosp Res Inst, Taejon, South Korea
[4] Korea Text Machinary Inst, Kyongsan, South Korea
来源：
TRIBOLOGY INTERNATIONAL | 2011年 / 44卷 / 11期
关键词：
Steam generator tube; Inconel; 690; Fretting fatigue strength; Friction force;
D O I：
10.1016/j.triboint.2010.11.006
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Inconel 690 alloy is used in nuclear power plant steam generator tubes. Fretting fatigue experiments were performed on Inconel 690 specimens at room temperature and at the nuclear power plant operating temperature of 320 degrees C. By comparing the fretting fatigue test data at room temperature and 320 degrees C, this study analyzed the change in characteristics related to the fatigue limit at 10(7) cycles. In addition, this study attempted to measure changes in the friction force for repetitive cycles in fretting fatigue tests, and analyzed the mechanism of fretting fatigue by observing the fracture surfaces and performing spectrum analysis. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1483 / 1487
页数：5
相关论文
共 50 条
  • [31] Effect of pH value on the fretting wear behavior of Inconel 690 alloy
    Wang, Z. H.
    Lu, Y. H.
    Li, J.
    Shoji, T.
    TRIBOLOGY INTERNATIONAL, 2016, 95 : 162 - 169
  • [32] Fretting wear behavior of Inconel690/1Cr13 stainless steel in high-temperature air and nitrogen
    Ye, Yi
    Ren, Ping-Di
    Zhang, Xiao-Yu
    Guo, Hong
    Li, Chang-Xiang
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2013, 23 (07): : 1900 - 1906
  • [33] Effect of temperature on fretting fatigue characteristics of bismaleimide matrix
    T. V. Tarasova
    S. M. Terekhina
    M. Salvia
    G. V. Malysheva
    Journal of Friction and Wear, 2013, 34 : 225 - 231
  • [34] Effect of temperature on fretting fatigue characteristics of bismaleimide matrix
    Tarasova, T. V.
    Terekhina, S. M.
    Salvia, M.
    Malysheva, G. V.
    JOURNAL OF FRICTION AND WEAR, 2013, 34 (03) : 225 - 231
  • [35] The effects of ultrasonic nanocrystal surface modification temperature on the mechanical properties and fretting wear resistance of Inconel 690 alloy
    Amanov, A.
    Umarov, R.
    APPLIED SURFACE SCIENCE, 2018, 441 : 515 - 529
  • [36] An investigation of the fatigue crack growth behavior of INCONEL 690
    Young, BA
    Gao, XS
    Srivatsan, TS
    King, PJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 416 (1-2): : 187 - 191
  • [37] The degradation mechanism of Inconel 690TT induced by fretting wear in air
    Li, J.
    Yang, B. B.
    Lu, Y. H.
    Xin, L.
    Wang, Z. H.
    Shoji, T.
    TRIBOLOGY INTERNATIONAL, 2017, 116 : 147 - 154
  • [38] The impact fretting corrosion behavior and damage mechanism of Inconel 690TT under different impact forces in high temperature pressurized water
    Bian, W. W.
    Lu, Y. H.
    Kang, L. Z.
    Zhang, X. F.
    Xin, L.
    Shoji, T.
    CORROSION SCIENCE, 2024, 240
  • [39] Fretting wear properties of Inconel600 alloy at high temperature
    Xin, Long
    Ma, Miao
    Lu, Yong-Hao
    Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2015, 37 (07): : 928 - 935
  • [40] The subsurface damage mechanism of Inconel 690 during fretting wear in pure water
    Li, J.
    Lu, Y. H.
    Xin, L.
    Shoji, T.
    TRIBOLOGY INTERNATIONAL, 2018, 117 : 152 - 161
12345