Welding characteristics of butt-welded Inconel625 plate using CO2 laser beam

被引：8
|
作者：
Vemanaboina, Harinadh [1 ,2 ]
Naidu, G. Guruvaiah [2 ]
Kumar, Golla Vinod [2 ]
Reddy, D. Ramachandra [2 ]
机构：
[1] VIT Univ, SMEC, Vellore, Tamil Nadu, India
[2] Nalla Narasimha Reddy Grp Inst, Dept Mech Engn, Hyderabad 500088, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷
关键词：
Laser beam welding; Inconel625; Radiography; Distortion; Bead geometry; LASER; MICROSTRUCTURE;
D O I：
10.1016/j.matpr.2019.08.223
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel weldments are widely used in automobile and structural industries. In this study, the joints of Inconel625 are made with CO2 Laser beam welding process. The experimentation is carried out with two sets of process parameters varying the laser power and estimating the response of the welded component. Radiography analysis and distortion in the weldments are carried out. Distortion is measured using the Vernier height gauge. The lower the better-quality characteristics are chosen for distortion. The welds are free from flaws and the lower heat input results in the lower distortion. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：859 / 863
页数：5
相关论文
共 50 条
  • [31] Experimental analysis of AA5083 butt joints welded by CO2 laser
    Tricarico, L.
    Spina, R.
    Sorgente, D.
    Ancona, A.
    Sibillano, T.
    Basile, G.
    SHEET METAL 2007, 2007, 344 : 745 - +
  • [32] Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding
    Hong, J. K.
    Park, J. H.
    Park, N. K.
    Eom, I. S.
    Kim, M. B.
    Kang, C. Y.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 201 (1-3) : 515 - 520
  • [33] CO2 laser beam welding of 6061-T6 aluminum alloy thin plate
    Akio Hirose
    Kojiro F. Kobayashi
    Hirotaka Todaka
    Metallurgical and Materials Transactions A, 1997, 28 : 2657 - 2662
  • [34] CO2 laser beam welding of 6061-T6 aluminum alloy thin plate
    Hirose, A
    Todaka, H
    Kobayashi, KF
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (12): : 2657 - 2662
  • [35] CO2 laser beam welding of 6061-T6 aluminum alloy thin plate
    Osaka Univ, Osaka, Japan
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1997, 28A (12): : 2657 - 2662
  • [36] Adaptive Feedback Beam Shaping of the CO2 Welding Laser
    Jedlicka, Petr
    Mrna, Libor
    Sarbort, Martin
    Rerucha, Simon
    LASER BEAM SHAPING XI, 2010, 7789
  • [37] Welding and analysis of Hastelloy X alloy butt joint made by CO2 laser
    Sathishkumar, G.
    Murugan, S. Senthil
    Sathiya, P.
    WELDING IN THE WORLD, 2025, 69 (02) : 311 - 325
  • [38] Characteristics of CO2 Laser Welded TRIP Steel Sheet
    Wang, Wenquan
    Huang, Shiming
    You, Qun
    Kang, C. Y.
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 3764 - +
  • [39] Multipass welding of thick section steels using autogenous CO2 laser welding and CO2 laser-MIG hybrid welding
    Huang, J. (jhuang@sjtu.edu.cn), 1600, China Welding, 111 Hexing Road, Harbin, 150080, China (21):
  • [40] Analysis of high power CO2 dual beam laser welding
    Capello, E
    Chiarello, P
    Piccione, E
    Previtali, B
    AMST 02: ADVANCED MANUFACTURING SYSTEMS AND TECHNOLOGY, PROCEEDINGS, 2002, (437): : 473 - 480
12345