Welding characteristics of butt-welded Inconel625 plate using CO2 laser beam

被引：8
|
作者：
Vemanaboina, Harinadh [1 ,2 ]
Naidu, G. Guruvaiah [2 ]
Kumar, Golla Vinod [2 ]
Reddy, D. Ramachandra [2 ]
机构：
[1] VIT Univ, SMEC, Vellore, Tamil Nadu, India
[2] Nalla Narasimha Reddy Grp Inst, Dept Mech Engn, Hyderabad 500088, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷
关键词：
Laser beam welding; Inconel625; Radiography; Distortion; Bead geometry; LASER; MICROSTRUCTURE;
D O I：
10.1016/j.matpr.2019.08.223
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel weldments are widely used in automobile and structural industries. In this study, the joints of Inconel625 are made with CO2 Laser beam welding process. The experimentation is carried out with two sets of process parameters varying the laser power and estimating the response of the welded component. Radiography analysis and distortion in the weldments are carried out. Distortion is measured using the Vernier height gauge. The lower the better-quality characteristics are chosen for distortion. The welds are free from flaws and the lower heat input results in the lower distortion. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：859 / 863
页数：5
相关论文
共 50 条
  • [21] Investigation of unequal thickness Mg/steel butt-welded plate by hybrid laser-tungsten inert gas welding with a Ni interlayer
    Song, Gang
    Li, Taotao
    Zhang, Zhaodong
    Liu, Liming
    JOURNAL OF MANUFACTURING PROCESSES, 2017, 30 : 299 - 302
  • [22] Effects of Process Parameters on Weld Metal Keyhole Characteristics with CO2 Laser Butt Welding
    Cui, Chengyun
    Hu, Jiandong
    Gao, Kun
    Pang, Shulai
    Yang, Yue
    Wang, Hongying
    Guo, Zuoxing
    LASERS IN ENGINEERING, 2008, 18 (5-6) : 319 - 327
  • [23] Analysis of optical and acoustic signals in CO2 laser butt welding
    Meng, Xuanxuan
    Wang, Chunming
    Hu, Xiyuan
    Hanjie Xuebao/Transactions of the China Welding Institution, 2011, 32 (07): : 95 - 99
  • [24] Butt welding of SUS304 and Inconel718 tubes by using defocused laser beam
    Cheng, Jian
    Xie, Feng
    Chen, Yulong
    Zhang, Xingpeng
    Zhai, Zhongshen
    Li, Fengping
    Liu, Dun
    JOURNAL OF LASER APPLICATIONS, 2023, 35 (04)
  • [25] A comparative study on fiber laser and CO2 laser welding of Inconel 617
    Ren, Wenjie
    Lu, Fenggui
    Yang, Renjie
    Liu, Xia
    Li, Zhuguo
    Hosseini, Seyed Reza Elmi
    MATERIALS & DESIGN, 2015, 76 : 207 - 214
  • [26] Absorption of the laser beam during welding with CO2 laser
    Hoffman, J
    Szymanski, Z
    OPTICA APPLICATA, 2002, 32 (1-2) : 129 - 145
  • [27] CO2 laser butt-welding of steel sandwich sheet composites
    Konstantinos Salonitis
    Panagiotis Stavropoulos
    Apostolos Fysikopoulos
    George Chryssolouris
    The International Journal of Advanced Manufacturing Technology, 2013, 69 : 245 - 256
  • [28] CO2 laser butt-welding of steel sandwich sheet composites
    Salonitis, Konstantinos
    Stavropoulos, Panagiotis
    Fysikopoulos, Apostolos
    Chryssolouris, George
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (1-4): : 245 - 256
  • [29] Welding of Alumina Using a Pulsed Dual-Beam CO2 Laser
    Harris, J.
    Akarapu, R.
    Segall, A. E.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2011, 133 (01):
  • [30] Properties of CO2 laser-welded butt joints of dissimilar magnesium alloys
    Kolodziejczak, Pawel
    Kalita, Wojciech
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (02) : 1122 - 1128
12345