Finite element analysis of dynamic changes in spinal mechanics of osteoporotic lumbar fracture

被引:15
|
作者
Yan, Jianwen [1 ]
Liao, Zhong [1 ]
Yu, Yafang [2 ]
机构
[1] Fuzhou Second Hosp, Fuzhou, Peoples R China
[2] Fujian Med Univ, Union Hosp, Fuzhou, Peoples R China
关键词
Finite element analysis; Osteoporosis; Thoracolumbar fracture; Spinal mechanics; Clinical application study; VERTEBRAL FRACTURE; RISK;
D O I
10.1186/s40001-022-00769-x
中图分类号
R-3 [医学研究方法]; R3 [基础医学];
学科分类号
1001 ;
摘要
Aim This study aims to explore the effects of finite element biomechanical properties of different methods in the treatment of osteoporotic thoracolumbar fractures. Methods Based on the ultra-thin computed tomography scan data of a volunteer's thoracolumbar spine, the finite element method was used to simulate the treatment of osteoporotic thoracolumbar fracture. Spiral computed tomography scanning was used to obtain images of the thoracolumbar region, which was then imported into Mimics software to obtain the three-dimensional geometric model. The finite element model of normal T-11 - L-2 segment was established by finite element software Abaqus and the validity of the model loading was verified. The finite element model of T-11 vertebral compression fracture was established based on normal raw data. The clinical overextension reduction manipulation was simulated by different treatment methods and the changes in stress and displacement in different parts of injured vertebrae were analyzed. Results An effective finite element model of T-11-L-2 segment was established. The maximum stress, axial compression strength, axial compression stiffness, and transverse shear stiffness were significantly better in the percutaneous kyphoplasty and percutaneous vertebroplasty treatment group than in the conservative treatment group and open treatment group (P < 0.05). Additionally, there was no significant difference between the open treatment group and conservative treatment group, or between the PKP and PVP treatment group. Conclusion Percutaneous vertebroplasty and percutaneous kyphoplasty not only met the requirements of normal functional kinematics of thoracolumbar spine, but also restored the stability of thoracolumbar spine. They had good biomechanical properties and remarkable application effects. The application of finite element analysis can help select a scientific, reasonable, and effective treatment scheme for the clinical diagnosis and treatment of osteoporotic thoracolumbar fractures.
引用
收藏
页数:9
相关论文
共 50 条
  • [1] Finite element analysis of dynamic changes in spinal mechanics of osteoporotic lumbar fracture
    Jianwen Yan
    Zhong Liao
    Yafang Yu
    European Journal of Medical Research, 27
  • [2] Lumbar spinal finite element analysis in a gravity environment
    Li Kerun
    Zhang Junhua
    Jiang Jianbo
    Ma Shanshan
    EIGHTH INTERNATIONAL CONFERENCE ON DIGITAL IMAGE PROCESSING (ICDIP 2016), 2016, 10033
  • [3] Biomechanical effects of metastasis in the osteoporotic lumbar spine: A Finite Element Analysis
    Giuseppe Salvatore
    Alessandra Berton
    Hugo Giambini
    Mauro Ciuffreda
    Pino Florio
    Umile Giuseppe Longo
    Vincenzo Denaro
    Andrew Thoreson
    Kai-Nan An
    BMC Musculoskeletal Disorders, 19
  • [4] Biomechanical effects of metastasis in the osteoporotic lumbar spine: A Finite Element Analysis
    Salvatore, Giuseppe
    Berton, Alessandra
    Giambini, Hugo
    Ciuffreda, Mauro
    Florio, Pino
    Longo, Umile Giuseppe
    Denaro, Vincenzo
    Thoreson, Andrew
    An, Kai-Nan
    BMC MUSCULOSKELETAL DISORDERS, 2018, 19
  • [5] On the finite element analysis of inverse problems in fracture mechanics
    Gadala, Mohamed S.
    McCullough, Andrew D.B.
    Engineering Computations (Swansea, Wales), 1999, 16 (04): : 481 - 502
  • [6] FRACTURE-MECHANICS AND FINITE-ELEMENT ANALYSIS
    LAIRD, G
    EPSTEIN, JS
    MECHANICAL ENGINEERING, 1992, 114 (11) : 69 - 73
  • [7] On the finite element analysis of inverse problems in fracture mechanics
    Gadala, MS
    McCullough, ADB
    ENGINEERING COMPUTATIONS, 1999, 16 (04) : 481 - 502
  • [8] Probabilistic finite element for fracture mechanics
    Akramin, M.R.M.
    Ariffin, A.K.
    Alshoaibi, Abdulnaser
    Hadi, M.S.A.
    Huzni, Syifaul
    Mohamed, Nan
    HKIE Transactions Hong Kong Institution of Engineers, 2008, 15 (02): : 1 - 8
  • [9] Biomechanical Analysis of Lumbar Interbody Fusion Cages With Various Elastic Moduli in Osteoporotic and Non-osteoporotic Lumbar Spine: A Finite Element Analysis
    Zou, Da
    Yue, Lihao
    Fan, Zheyu
    Zhao, Yi
    Leng, Huijie
    Sun, Zhuoran
    Li, Weishi
    GLOBAL SPINE JOURNAL, 2024, 14 (07) : 2053 - 2061
  • [10] Experimental and finite element analysis of fracture criterion in general yielding fracture mechanics
    D. M. Kulkarni
    Ravi Prakash
    A. N. Kumar
    Sadhana, 2002, 27 : 631 - 642