Effect Of Rolling On Ni-Ti-Fe Shape Memory Alloys Prepared Through Novel Powder Metallurgy Route

被引：8

作者：

Gupta, Gaurav Kumar ^{[1
]}

Patel, Krishan Kumar ^{[2
]}

Purohit, Rajesh ^{[2
]}

Bhagoria, Palak ^{[3
]}

机构：

[1] CSIR, AMPRI, Bhopal, India

[2] Maulana Azad Natl Inst Technol, Mech Engn Dept, Bhopal, India

[3] RGPV, Mech Engn Dept, Bhopal, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 04期

关键词：

Nickel; Titanium; Iron powders; Shape memory alloys (SMA); hot pressing; XRD; DSC; and hot rolling; SMAS;

D O I：

10.1016/j.matpr.2017.05.050

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study is concentrated on the preparation of Ni-Ti shape memory alloys with the addition of different atomic wt.% of iron in place of atomic wt.% of Nickel through novel powder metallurgy route. Further rolling was done on hot pressed sample in rolling mill. The microstructure and the mechanical properties of the hot pressed and further rolled sample of Ni-Ti and Ni-Ti-Fe were studied. The DSC and XRD analysis was also done on the hot pressed and rolled samples. The samples were prepared by the powders of Nickel, Titanium and Iron mixed in hexagonal trembler and further cold compaction on hydraulic press. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：5385 / 5397

页数：13

共 50 条

[41] Shape memory characteristics of powder metallurgy processed Ti50Ni50 alloy
Kim, Yeon-wook
Jeon, Kyung-su
3RD INTERNATIONAL SYMPOSIUM ON SHAPE MEMORY MATERIALS FOR SMART SYSTEMS/E-MRS 2010 SPRING MEETING, 2010, 10 : 17 - 21
[42] Development of cube texture in pure Ni, Ni-W and Ni-Mo alloys prepared by the powder metallurgy route
Bhattacharjee, PP
Ray, RK
Upadhyaya, A
SCRIPTA MATERIALIA, 2005, 53 (12) : 1477 - 1481
[43] Fracture behaviour of Cu-Al-Ni shape memory alloys obtained by powder metallurgy
Rodríguez, PP
Pérez-Sáez, RB
Recarte, V
San Juan, JM
Ruano, OA
Nó, ML
REVISTA DE METALURGIA, 2001, 37 (02) : 194 - 198
[44] Influence of mechanical alloying on the behavior of Fe-Mn-Si-Cr-Ni shape memory alloys made by powder metallurgy
Pricop, Bogdan
Soyler, Umut
Ozkal, Burak
Lohan, Nicoleta Monica
Paraschiv, Adrian Liviu
Suru, Marius Gabriel
Bujoreanu, Leandru-Gheorghe
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS, 2013, 738-739 : 237 - +
[45] Thermomechanical properties in Cu-Al-Ni shape memory alloys processed by powder metallurgy
Rodríguez, PP
Ibarra, A
Nó, ML
San Juan, J
SMST-2003: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON SHAPE MEMORY AND SUPERELASTIC TECHNOLOGIES, 2004, : 191 - 200
[46] Severe plastic deformation on powder metallurgy Cu-Al-Ni shape memory alloys
Lopez, G. A.
Lopez-Ferreno, I.
Kilmametov, A. R.
Breczewski, T.
Straumal, B. B.
Baretzky, B.
No, M. L.
Juan, J. San
MATERIALS TODAY-PROCEEDINGS, 2015, 2 : 747 - 750
[47] Martensitic transformation in Cu-Al-Ni shape memory alloys processed by powder metallurgy
SanJuan, J
PerezSaez, RB
Recarte, V
No, ML
Caruana, G
Lieblich, M
Ruano, O
JOURNAL DE PHYSIQUE IV, 1995, 5 (C8): : 919 - 924
[48] In vivo cytotoxic evaluation of Ti-Ni-Fe shape memory alloys
Tabish, T. A.
Butt, T. Z.
Ali, M.
Ali, M.
Shaikh, R. S.
Atiq, S.
Draghi, L.
MATERIALS TECHNOLOGY, 2014, 29 (03) : 139 - 143
[49] Internal friction in Fe-Co-Ni-Ti shape memory alloys
Chernenko, VA
Kokorin, VV
Vitenko, IN
Bugaychuk, SN
JOURNAL DE PHYSIQUE IV, 1995, 5 (C8): : 481 - 483
[50] Effect of quenching media on the properties of TiNi shape memory alloys fabricated by powder metallurgy
Elsayed, Ayman
Umeda, Junko
Kondoh, Katsuyoshi
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 842

← 1 2 3 4 5 →