Effect Of Rolling On Ni-Ti-Fe Shape Memory Alloys Prepared Through Novel Powder Metallurgy Route

被引：8

作者：

Gupta, Gaurav Kumar ^{[1
]}

Patel, Krishan Kumar ^{[2
]}

Purohit, Rajesh ^{[2
]}

Bhagoria, Palak ^{[3
]}

机构：

[1] CSIR, AMPRI, Bhopal, India

[2] Maulana Azad Natl Inst Technol, Mech Engn Dept, Bhopal, India

[3] RGPV, Mech Engn Dept, Bhopal, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 04期

关键词：

Nickel; Titanium; Iron powders; Shape memory alloys (SMA); hot pressing; XRD; DSC; and hot rolling; SMAS;

D O I：

10.1016/j.matpr.2017.05.050

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study is concentrated on the preparation of Ni-Ti shape memory alloys with the addition of different atomic wt.% of iron in place of atomic wt.% of Nickel through novel powder metallurgy route. Further rolling was done on hot pressed sample in rolling mill. The microstructure and the mechanical properties of the hot pressed and further rolled sample of Ni-Ti and Ni-Ti-Fe were studied. The DSC and XRD analysis was also done on the hot pressed and rolled samples. The samples were prepared by the powders of Nickel, Titanium and Iron mixed in hexagonal trembler and further cold compaction on hydraulic press. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：5385 / 5397

页数：13

共 50 条

[31] Processing and Characterization of Cu-Al-Ni Shape Memory Alloy Strips Prepared from Elemental Powders via a Novel Powder Metallurgy Route
Sharma, Mohit
Vajpai, Sanjay Kumar
Dube, Ravindra Kumar
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (11): : 2905 - 2913
[32] Characterization of NiTi and NiTiCu Porous Shape Memory Alloys Prepared by Powder Metallurgy (Part I)
Alaa Abdulhasan Atiyah
Abdul-Raheem Kadhum Abid Ali
Nawal Mohammed Dawood
Arabian Journal for Science and Engineering, 2015, 40 : 901 - 913
[33] Characterization of NiTi and NiTiCu Porous Shape Memory Alloys Prepared by Powder Metallurgy (Part I)
Atiyah, Alaa Abdulhasan
Ali, Abdul-Raheem Kadhum Abid
Dawood, Nawal Mohammed
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2015, 40 (03) : 901 - 913
[34] Elastocaloric cooling and heating using R-phase transformation in hot rolled Ni-Ti-Fe shape memory alloys with 2 and 4 at% Fe content
Aaltio, Ilkka
Fukuda, Takashi
Kakeshita, Tomoyki
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 780 : 930 - 936
[35] Microstructure and thermomechanical properties of shape memory alloys Ti50-NI50 elaborated by arc melting and by powder metallurgy
Olier, P.
Brachet, J.C.
Guenin, G.
Journal De Physique, 5 (02): : 2 - 217
[36] AN EFFECT OF THE SHAPE MEMORY WITH THE NI-V-TI ALLOYS
CHERNOV, DB
SEMENOVA, EL
TRETYACHENKO, LA
DOPOVIDI AKADEMII NAUK UKRAINSKOI RSR SERIYA A-FIZIKO-MATEMATICHNI TA TECHNICHNI NAUKI, 1985, (11): : 81 - 83
[37] Shape memory effect of clamped Ni-Ti alloys
Kaneko, Kenichi, 1600, Japan Inst of Metals, Sendai, Japan (58):
[38] Investigation of boron effect on the densification of Fe-50%Ni soft magnetic alloys produced by powder metallurgy route
Ali, Muhammad
Ahmad, Faiz
Melor, Puteri Sri
Yahya, Noorhana
Aslam, Muhammad
MATERIALS TODAY-PROCEEDINGS, 2019, 16 : 2210 - 2218
[39] Dynamic recrystallization in a Ni-Ti-Fe shape memory alloy: Effects on austenite-martensite phase transformation
Basu, Ritwik
Jain, Lokendra
Maji, Bikas
Krishnan, Madangopal
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 639 : 94 - 101
[40] Martensitic transformation in Cu-Al-Ni shape memory alloys processed by powder metallurgy
San, Juan, J.
Perez-Saez, R.B.
Recarte, V.
No, M.L.
Caruana, G.
Lieblich, M.
Ruano, O.
Journal De Physique. IV : JP, 1995, 5 (8 pt 2): : 8 - 919

← 1 2 3 4 5 →