Buckling and Mechanical Properties of Cr-Ni Stainless Steels

被引：0

作者：

Lin, Kai-Peng ^{[1
]}

Fang, Te-Hua ^{[1
]}

Stachiv, Ivo ^{[1
]}

机构：

[1] Natl Kaohsiung Univ Appl Sci, Dept Mech Engn, Kaohsiung 80778, Taiwan

来源：

PROCEEDINGS OF 2016 INTERNATIONAL CONFERENCE ON APPLIED SYSTEM INNOVATION (ICASI) | 2016年

关键词：

Stress; Stainless steel; Buckling; Finite element method; TRANSMISSION ELECTRON-MICROSCOPY; COMPRESSION;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The mechanical properties, defounation and buckling of chromium-nickel-stainless steel materials under compression were perfouned. Impact of different geometric shapes, defects and sizes on the mechanical properties of chromium-nickel-stainless steel samples were studied by utilizing the finite element method. The loading force of vertical direction decreased with an increase of the strain of stainless steel column at different sizes. The critical strength of samples with cone, square pillar and column were approximately 3.4, 1.1, 0.5 MPa, respectively. The results indicate that the geometric indent defects induced the buckling location due to the stress concentration. In addition, the slenderness ratio of the samples was also presented.

引用

页数：4

共 50 条

[41] THE STUDY OF LOW-TEMPERATURE MAGNETIC-PROPERTIES OF CR-NI AUSTENITIC STEELS
KREJZLIK, V
PECA, P
SMETANA, Z
KOVOVE MATERIALY-METALLIC MATERIALS, 1984, 22 (06): : 666 - 671
[42] STUDIES ON THE TERNARY DIFFUSION IN FERRITIC AND AUSTENITIC CR-NI STEELS
SIEPAK, J
NEUE HUTTE, 1984, 29 (12): : 452 - 455
[43] A CONTRIBUTION TO THE CLEARING OF THE MICROSEGREGATION BEHAVIOR IN AUSTENITIC CR-NI STEELS
SIEGEL, U
NEUE HUTTE, 1984, 29 (10): : 382 - 383
[44] ANOMALIES IN THE THERMAL-EXPANSION OF AUSTENITIC CR-NI STEELS
RICHTER, F
STEEL RESEARCH, 1987, 58 (02): : 93 - 96
[45] INTERACTIONS BETWEEN REM AND HARMFUL IMPURITIES IN CR-NI STEELS
KUKHTIN, MV
CHEREMNYKH, VP
METAL SCIENCE AND HEAT TREATMENT, 1980, 22 (9-10) : 715 - 720
[46] BAINITE FORMATION IN LOW-CARBON CR-NI STEELS
MOU, YW
HSU, TY
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1988, 19 (07): : 1695 - 1701
[47] HEAT RESISTANCE OF Cr-Ni AND Cr-Ni-Mo STEELS WITH BORON ADDITIONS.
Morozov, Yu.A.
Sidel'kovskii, M.P.
Rozenberg, V.M.
Metal Science and Heat Treatment, 1973, 15 (5-6) : 447 - 450
[48] Pitting corrosion of pickled and electropolished Cr-Ni stainless steel
Lochynski, Pawel
Lyczkowska, Edyta
Kuczewskl, Krzysztof
Szczygiel, Bogdan
PRZEMYSL CHEMICZNY, 2014, 93 (05): : 762 - 765
[49] Microstructure characterization and mechanical properties of Cr-Ni/ZrO2 nanocomposites
Sevinc, Ozlem
Diler, Ege A.
ADVANCES IN NANO RESEARCH, 2022, 13 (04) : 313 - 323
[50] STRENGTHENING OF CR-NI STEELS BY LOW-TEMPERATURE DEFORMATION
SPIRIDONOV, VB
GORDEEV, YP
PODGORSKII, BN
METAL SCIENCE AND HEAT TREATMENT, 1976, 18 (5-6) : 423 - 427

← 1 2 3 4 5 →