Evaluation of the adhesion resistance between steel and concrete by push out test

被引：41
|
作者：
Berthet, J. F. [1 ]
Yurtdas, I. [1 ]
Delmas, Y. [1 ]
Li, A. [1 ]
机构：
[1] Univ Reims, Civil Engn Lab, UFR Sci, F-51687 Reims 2, France
来源：
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 2011年 / 31卷 / 02期
关键词：
Adhesive; Stress; Connection; Steel-concrete composite beam; Push out test; STATIC BEHAVIOR; BEAM;
D O I：
10.1016/j.ijadhadh.2010.11.004
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
In steel-concrete composite structures, a good connection between steel and concrete is essential. This work evaluates the adhesion resistance of the composite structure with the push out method by changing the connection types. In the steel-concrete composite system, it is desirable to avoid failure in the steel-concrete interface. Five connective modes and two specimen geometries have been proposed and tested. Failure mode, ultimate load, strain variation and distribution are also reported and analyzed in the paper. From the experimental results, many connective modes can be used to connect steel and concrete with the adhesive. Analytical work showed that normal and shear stress can be evaluated. A comparison between test results and theoretical predictions shows good agreement. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：75 / 83
页数：9
相关论文
共 50 条
  • [31] Push-Out Behavior of Encased Rigid Shear Connectors in Steel–Concrete Joints
    Mohammad Mehdi Ahmadi
    Seyed Rasoul Mirghaderi
    Nasrin Bakhshayesh Eghbali
    [J]. Arabian Journal for Science and Engineering, 2022, 47 : 13537 - 13557
  • [32] Push-out tests of concrete-filled stainless steel SHS tubes
    Feng, Ran
    Chen, Yu
    He, Kang
    Wei, Jiangang
    Chen, Baochun
    Zhang, Xiaotian
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2018, 145 : 58 - 69
  • [33] Experimental and finite element analysis of push-out shear test for adhesive joints between pultruded GFRP and concrete
    Alachek, Ibrahim
    Reboul, Nadege
    Jurkiewiez, Bruno
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2020, 98
  • [34] Push-out test to study bond properties of mortar-concrete interface
    Yang, Shutong
    Huang, Weiping
    Liu, Yalin
    [J]. MAGAZINE OF CONCRETE RESEARCH, 2014, 66 (21) : 1104 - 1115
  • [35] Numerical analysis on shear stud in push-out test with crumb rubber concrete
    Han, Qinghua
    Wang, Yihong
    Xu, Jie
    Xing, Ying
    Yang, Guang
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2017, 130 : 148 - 158
  • [36] Durability of adhesion between an adhesive and post-space dentin: Push-out evaluation at one and six months
    Ballesio, Ilaria
    Angotti, Vincenzo
    Gallusi, Gianni
    Libonati, Antonio
    Tecco, Simona
    Marzo, Giuseppe
    Campanella, Vincenzo
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2012, 38 : 75 - 78
  • [37] ADHESION OF LACQUER TO PHOSPHATED STEEL - A SHEAR TEST EVALUATION
    ARAVOT, YM
    ARCAN, L
    ARCAN, ME
    ALBUYARON, A
    [J]. JOURNAL OF MATERIALS SCIENCE, 1990, 25 (08) : 3714 - 3722
  • [38] Load-slip performance of timber-to-concrete connections with U-steel connectors under push-out test
    Cao, Jixing
    Liu, Yingyang
    Wang, Yixuan
    Zhang, Yiming
    [J]. JOURNAL OF BUILDING ENGINEERING, 2022, 45
  • [39] Push-out tests on J-hook connectors in steel-concrete-steel sandwich structure
    Yan, Jia-bao
    Liew, J. Y. Richard
    Sohel, K. M. A.
    Zhang, M. H.
    [J]. MATERIALS AND STRUCTURES, 2014, 47 (10) : 1693 - 1714
  • [40] Push-out test of eco-friendly steel-concrete-steel composite sections enhanced by polypropylene fibers: An experimental study and statistical analysis
    Hassan, Sawsan Akram
    Hanoon, Ammar N.
    Abdulhameed, Ali A.
    [J]. RESULTS IN ENGINEERING, 2024, 23
12345