Evaluation of the adhesion resistance between steel and concrete by push out test

被引：41
|
作者：
Berthet, J. F. [1 ]
Yurtdas, I. [1 ]
Delmas, Y. [1 ]
Li, A. [1 ]
机构：
[1] Univ Reims, Civil Engn Lab, UFR Sci, F-51687 Reims 2, France
来源：
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 2011年 / 31卷 / 02期
关键词：
Adhesive; Stress; Connection; Steel-concrete composite beam; Push out test; STATIC BEHAVIOR; BEAM;
D O I：
10.1016/j.ijadhadh.2010.11.004
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
In steel-concrete composite structures, a good connection between steel and concrete is essential. This work evaluates the adhesion resistance of the composite structure with the push out method by changing the connection types. In the steel-concrete composite system, it is desirable to avoid failure in the steel-concrete interface. Five connective modes and two specimen geometries have been proposed and tested. Failure mode, ultimate load, strain variation and distribution are also reported and analyzed in the paper. From the experimental results, many connective modes can be used to connect steel and concrete with the adhesive. Analytical work showed that normal and shear stress can be evaluated. A comparison between test results and theoretical predictions shows good agreement. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：75 / 83
页数：9
相关论文
共 50 条
  • [21] Push-out Test on Bond Property of Micro-Expansive Concrete-Filled Steel Tube Columns
    Xu, Kaicheng
    Chen, Mengcheng
    Yuan, Fang
    [J]. ADVANCES IN STRUCTURES, PTS 1-5, 2011, 163-167 : 610 - +
  • [22] Study on push-out test and bond stress-slip relationship of circular concrete filled steel tube
    Yin Xiaowei
    Lu Xilin
    [J]. STEEL AND COMPOSITE STRUCTURES, 2010, 10 (04): : 317 - 329
  • [23] The influences of the number of concrete dowels to shear resistance based on push out tests
    Vu, Anh-Tuan
    Han, Ngoc-Duc
    Nguyen, Dinh-Hoa
    Nguyen, Trung-Kien
    [J]. FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2022, 16 (59): : 256 - 264
  • [24] Push-out test on the interface bond-slip behavior and calculation on bond strength between steel tube and recycled aggregate concrete in RACFST structures
    Chen, Zongping
    Xu, Jinjun
    Xue, Jianyang
    Su, Yisheng
    [J]. Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2013, 46 (03): : 49 - 58
  • [25] PLASTICS TO PUSH OUT STONE AND CONCRETE
    WITNEY, BD
    [J]. ENGINEERING, 1970, 209 (5414): : 133 - &
  • [26] Push-out test of pre-stressing concrete filled circular steel tube columns by means of expansive cement
    Chang Xu
    Huang Chengkui
    Jiang Decheng
    Song Yuancheng
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2009, 23 (01) : 491 - 497
  • [27] Push-Out Tests on Interlocked Angles Connectors in Steel-Concrete-Steel Composite Structure
    Chen, Junyi
    Wang, Yonghui
    Zhai, Ximei
    Zhi, Xudong
    Sun, Menghan
    [J]. INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2023, 23 (02) : 431 - 448
  • [28] Push-out tests on J-hook connectors in steel–concrete–steel sandwich structure
    Jia-bao Yan
    J. Y. Richard Liew
    K. M. A. Sohel
    M. H. Zhang
    [J]. Materials and Structures, 2014, 47 : 1693 - 1714
  • [29] Push-Out Tests on Interlocked Angles Connectors in Steel-Concrete-Steel Composite Structure
    Junyi Chen
    Yonghui Wang
    Ximei Zhai
    Xudong Zhi
    Menghan Sun
    [J]. International Journal of Steel Structures, 2023, 23 : 431 - 448
  • [30] Push-out test of steel reinforcement from recycled plastic beams
    Prochazkova, Zdenka
    Tamparopoulos, Alexios E.
    Strauss, Alfred
    [J]. BETON- UND STAHLBETONBAU, 2013, : 169 - 173
12345