Low temperature super ductility and threshold stress of an ultrafine-grained Al-Zn-Mg-Zr alloy processed by equal-channel angular pressing

被引：3

作者：

Boldizsar, Balint ^{[1
]}

Jenei, Peter ^{[1
]}

Ahmed, Anwar Q. ^{[1
]}

Murashkin, Maxim Yu ^{[2
,3
]}

Valiev, Ruslan Z. ^{[2
,3
]}

Chinh, Nguyen Q. ^{[1
]}

机构：

[1] Eotvos Lorand Univ, Dept Mat Phys, Pazmany Peter Setany 1-A, H-1117 Budapest, Hungary

[2] Ufa State Aviat Tech Univ, Inst Phys Adv Mat, 12 K Marx St, Ufa 450008, Russia

[3] St Petersburg State Univ, Lab Mech Bulk Nanomat, 28 Univ Skypr, St Petersburg 198504, Russia

来源：

JOURNAL OF MATERIALS SCIENCE | 2021年 / 56卷 / 34期

关键词：

IMPRESSION CREEP; MECHANICAL-PROPERTIES; SUPERPLASTIC FLOW; MICROSTRUCTURE; DEFORMATION; BEHAVIOR; PLASTICITY;

D O I：

10.1007/s10853-021-06527-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Low temperature tensile and impression creep tests were carried out on an ultrafine-grained 7xxx series Al-4.8Zn-1.2 Mg-0.14Zr (wt%) alloy, which can be deformed for maximum elongation of about 200% at 150 degrees C. The characteristics of the deformation process, such as the strain rate sensitivity (SRS) and activation energy (Q) were determined by considering also the effect of threshold stress. Relatively high SRS of similar to 0.35 and low activation energy of similar to 92 kJ/mole were obtained, confirming the super ductility of the investigated ultrafinegrained alloy in the low temperature region between 140 and 160 degrees C.

引用

页码：19244 / 19252

页数：9

共 50 条

[41] Superplastic behavior in ultrafine-grained materials produced by equal-channel angular pressing
Xu, Cheng
Kawasaki, Megumi
Figueiredo, Roberta B.
Duan, Zhichao
Langdon, Terence G.
Materials Science Forum, 2008, 579 : 29 - 40
[42] Impact toughness of an ultrafine-grained Al-11mass%Si alloy processed by rotary-die equal-channel angular pressing
Ma, A
Suzuki, K
Nishida, Y
Saito, N
Shigematsu, I
Takagi, M
Iwata, H
Watazu, A
Imura, T
ACTA MATERIALIA, 2005, 53 (01) : 211 - 220
[43] Microstructures and properties of ultrafine-grained tungsten produced by equal-channel angular pressing at low temperatures
Hao, T.
Fan, Z. Q.
Zhao, S. X.
Luo, G. N.
Liu, C. S.
Fang, Q. F.
JOURNAL OF NUCLEAR MATERIALS, 2013, 433 (1-3) : 351 - 356
[44] Recovery of Ductility in Ultrafine-Grained Low-Carbon Steel Processed Through Equal-Channel Angular Pressing Followed by Cold Rolling and Flash Annealing
Singh, Raj Bahadur
Mukhopadhyay, N. K.
Sastry, G. V. S.
Manna, R.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (03): : 1189 - 1203
[45] Recovery of Ductility in Ultrafine-Grained Low-Carbon Steel Processed Through Equal-Channel Angular Pressing Followed by Cold Rolling and Flash Annealing
Raj Bahadur Singh
N. K. Mukhopadhyay
G. V. S. Sastry
R. Manna
Metallurgical and Materials Transactions A, 2017, 48 : 1189 - 1203
[46] Dynamic deformation and fracture behavior of ultrafine-grained aluminum alloy fabricates by equal-channel angular pressing
Kim, YG
Hwang, B
Lee, S
Kim, WG
Shin, DH
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (11): : 2947 - 2955
[47] Dynamic deformation and fracture behavior of ultrafine-grained aluminum alloy fabricates by equal-channel angular pressing
Yang Gon Kim
Byoungchul Hwang
Sunghak Lee
Woo Gyeom Kim
Dong Hyuk Shin
Metallurgical and Materials Transactions A, 2005, 36 : 2947 - 2955
[48] Enhanced Stress Corrosion Cracking Resistance of Ultrafine-Grained Cu-Cr-Zr Alloy Fabricated via Equal-Channel Angular Pressing
Wang, Qingjuan
Liu, Dan
Tong, Libo
Zhou, Ying
Wang, Wei
Zhou, Haixiong
Fan, Ruixue
METALS, 2019, 9 (08)
[49] Low cycle fatigue properties of Al-Li-Cu-Mg-Zr alloy processed by equal-channel angular pressing
Liu, SM
Wang, ZG
JOURNAL OF MATERIALS SCIENCE, 2004, 39 (02) : 733 - 735
[50] Thermal Stability and S-Phase Evolution in Ultrafine-Grained Al-Mg-Li Alloy Produced by Equal-Channel Angular Pressing
Naydenkin, Evgeny V.
Mishin, Ivan P.
Zabudchenko, Olga V.
ADVANCED ENGINEERING MATERIALS, 2021, 23 (09)

← 1 2 3 4 5 →