Low temperature super ductility and threshold stress of an ultrafine-grained Al-Zn-Mg-Zr alloy processed by equal-channel angular pressing

被引：3

作者：

Boldizsar, Balint ^{[1
]}

Jenei, Peter ^{[1
]}

Ahmed, Anwar Q. ^{[1
]}

Murashkin, Maxim Yu ^{[2
,3
]}

Valiev, Ruslan Z. ^{[2
,3
]}

Chinh, Nguyen Q. ^{[1
]}

机构：

[1] Eotvos Lorand Univ, Dept Mat Phys, Pazmany Peter Setany 1-A, H-1117 Budapest, Hungary

[2] Ufa State Aviat Tech Univ, Inst Phys Adv Mat, 12 K Marx St, Ufa 450008, Russia

[3] St Petersburg State Univ, Lab Mech Bulk Nanomat, 28 Univ Skypr, St Petersburg 198504, Russia

来源：

JOURNAL OF MATERIALS SCIENCE | 2021年 / 56卷 / 34期

关键词：

IMPRESSION CREEP; MECHANICAL-PROPERTIES; SUPERPLASTIC FLOW; MICROSTRUCTURE; DEFORMATION; BEHAVIOR; PLASTICITY;

D O I：

10.1007/s10853-021-06527-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Low temperature tensile and impression creep tests were carried out on an ultrafine-grained 7xxx series Al-4.8Zn-1.2 Mg-0.14Zr (wt%) alloy, which can be deformed for maximum elongation of about 200% at 150 degrees C. The characteristics of the deformation process, such as the strain rate sensitivity (SRS) and activation energy (Q) were determined by considering also the effect of threshold stress. Relatively high SRS of similar to 0.35 and low activation energy of similar to 92 kJ/mole were obtained, confirming the super ductility of the investigated ultrafinegrained alloy in the low temperature region between 140 and 160 degrees C.

引用

页码：19244 / 19252

页数：9

共 50 条

[1] Low temperature super ductility and threshold stress of an ultrafine-grained Al–Zn–Mg–Zr alloy processed by equal-channel angular pressing
Bálint Boldizsár
Péter Jenei
Anwar Q. Ahmed
Maxim Yu. Murashkin
Ruslan Z. Valiev
Nguyen Q. Chinh
Journal of Materials Science, 2021, 56 : 19244 - 19252
[2] Ductility of ultrafine-grained copper processed by equal-channel angular pressing
Zhao, Yonghao
Li, Ying
Topping, Troy D.
Liao, Xiaozhou
Zhu, Yuntian
Valiev, Ruslan Z.
Lavernia, Enrique J.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2009, 100 (12) : 1647 - 1652
[3] Low-temperature creep behavior of ultrafine-grained 5083 Al alloy processed by equal-channel angular pressing
Kim, Ho-Kyung
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (10) : 2075 - 2081
[4] Low-temperature creep behavior of ultrafine-grained 5083 Al alloy processed by equal-channel angular pressing
Ho-Kyung Kim
Journal of Mechanical Science and Technology, 2010, 24 : 2075 - 2081
[5] Wear resistance of an ultrafine-grained Cu-Zr alloy processed by equal-channel angular pressing
Li, Jianwei
Wongsa-Ngam, Jittrapom
Xu, Jie
Shan, Debin
Guo, Bin
Langdon, Terence G.
WEAR, 2015, 326 : 10 - 19
[6] The influence of artificial aging on the microstructure and hardness of an Al-Zn-Mg-Zr alloy processed by equal-channel angular pressing
Gubicza, Jeno
Labar, Janos L.
Lendvai, Janos
Chinh, Nguyen Q.
JOURNAL OF MATERIALS SCIENCE, 2019, 54 (15) : 10918 - 10928
[7] Superplasticity in an ultrafine-grained Al-Mg-Sc alloy produced by equal-channel angular pressing
Komura, S
Berbon, PB
Utsunomiya, A
Furukawa, M
Horita, Z
Nemoto, M
Langdon, TG
HOT DEFORMATION OF ALUMINUM ALLOYS II, 1999, : 125 - 138
[8] Deformation behavior of an ultrafine-grained Al-Mg alloy produced by equal-channel angular pressing
Kapoor, R.
Chakravartty, J. K.
ACTA MATERIALIA, 2007, 55 (16) : 5408 - 5418
[9] Influence of annealing on ductility of ultrafine-grained titanium processed by equal-channel angular pressing–Conform and drawing
Alexander V. Polyakov
Irina P. Semenova
Ruslan Z. Valiev
Yi Huang
Terence G. Langdon
MRS Communications, 2013, 3 : 249 - 253
[10] Superplasticity of ultrafine-grained aluminum alloys processed by equal-channel angular pressing
Horita, Z
Komura, S
Berbon, PB
Utsunomiya, A
Furukawa, M
Nemoto, M
Langdon, TG
TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 91 - 96

← 1 2 3 4 5 →