Effects of minor element additions to the nanocrystalline feal intermetallic alloy obtained by mechanical alloying

Chemical, microstructural, and mechanical properties of nanocrystalline FeAl intermetallic alloys with Li, Ce, and Ni additions have been assessed. Mechanical alloying and sintering procedures were used to produce and consolidate the alloys. The sintering procedure was based on room temperature uniaxial pressing followed by annealing in air of the pressed specimens. The mechanically alloyed powders have a microstructure consisting of micrometer-size particles that contain FeAl intermetallic nanocrystals. The three minor additional elements form a solid solution with the B2 intermetallic structure of the FeAl alloy. Densification greater than 90% has been obtained. The hardness values are higher than those obtained from specimens produced with conventional casting procedures. High resolution transmission electron microscopy images showed clusters of less than 5nm with well-defined structure corresponding to Fe3Al.