Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends

被引：8
|
作者：
Agrawal, Pankaj [1 ]
Araujo, Edcleide M. [1 ]
Melo, Tomas J. A. [1 ]
机构：
[1] Univ Fed Campina Grande, Dept Mat Engn, BR-58109970 Campina Grande, PB, Brazil
来源：
JOURNAL OF MATERIALS SCIENCE | 2008年 / 43卷 / 13期
关键词：
D O I：
10.1007/s10853-008-2661-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, the effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends was investigated. The blends were prepared by two processing methods: Injection and Extrusion followed by Injection. The compatibilizers used were polyethylene grafted with acrylic acid (PEgAA) and polyethylene grafted with maleic anhydride (PEgMA). The results showed that in both processing methods the impact strength and elongation at break of the compatibilized blends were greater than those of the uncompatibilized ones. For the blends prepared by injection, the impact strength of PA6/PEgMA/LDPE blend was greater than that of PA6/PEgAA/LDPE blend. For the blends prepared by extrusion followed by injection, the impact strength of the PA6/PEgAA/LDPE blend was greater than that of PA6/PEgMA/LDPE blend. SEM analysis showed that the morphology of the PA6/PEgAA/LDPE blend prepared by extrusion followed by injection was more stable than that of the same blend prepared only by injection.
引用
收藏
页码：4443 / 4449
页数：7
相关论文
共 50 条
  • [41] Effect of Maleic Anhydride Content in Properties of PA6/AES Blends Compatibilized with MMA-MA
    de Oliveira, Amanda Dantas
    Chiba de Castro, Lucas Daniel
    Goncalves Beatrice, Cesar Augusto
    Lucas, Alessandra de Almeida
    Pessan, Luiz Antonio
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2017, 20 (06): : 1630 - 1637
  • [42] Morphology and mechanical properties of compatibilized nylon 6/polyethylene blends
    Kudva, RA
    Keskkula, H
    Paul, DR
    POLYMER, 1999, 40 (22) : 6003 - 6021
  • [43] Study of the Properties of Compatibilized ABS/PA6 Blends Using Response Surface Methodology
    Mohammadian-Gezaz, Somayyeh
    Ghasemi, Ismaeil
    Oromiehie, Abdolrasosl
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2009, 15 (03): : 191 - 198
  • [44] Study of mechanical properties and morphology of PA 6/PO blends compatibilized by PO grafted with itaconic acid
    Liu Xijun
    Jiang Zhaohua
    Zhu Wenming
    E-POLYMERS, 2007,
  • [45] Effects of organic montmorillonite on morphology and mechanical properties of acrylonitrilebutadienestyrene(ABS)polyamide 6 (PA6) blends
    Yan, Wei
    Qin, Shuhao
    Yu, Jie
    Guo, Jianbing
    Xue, Bin
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2010, 27 (01): : 37 - 42
  • [46] PA6/NBR blends: improvement of processability and mechanical properties
    Gomes, Ana C. O.
    Soares, Bluma G.
    Oliveira, Marcia G.
    Oliveira, Marcelo F. L.
    Paranhos, Caio M.
    E-POLYMERS, 2009,
  • [47] PA6/NBR blends: Improvement of processability and mechanical properties
    Gomes, Ana C. O.
    Soares, Bluma G.
    Oliveira, Marcia G.
    Oliveira, Marcelo F. L.
    Paranhos, Caio M.
    E-Polymers, 2009,
  • [48] Water absorptivity and mechanical properties of PA6/PTT blends
    Xu, Fu
    Zhang, Ping
    Ding, Yan-Huai
    Jiang, Yong
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2010, 26 (02): : 73 - 76
  • [49] Polymer blends of PA6 and PPE compatibilized by a multifunctional epoxy coupler
    Chang, FC
    CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS, 1998, 44 : 2428 - 2432
  • [50] Rheology, Morphology and Mechanical Properties of PA6/PP-g-MAH/POE Blends
    Run, Ming-tao
    Yao, Meng
    Xing, Bing-tao
    Zhou, Wen
    ADVANCED RESEARCH ON MATERIAL ENGINEERING, ARCHITECTURAL ENGINEERING AND INFORMATIZATION, 2012, 366 : 310 - 313
12345