Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends

被引：8
|
作者：
Agrawal, Pankaj [1 ]
Araujo, Edcleide M. [1 ]
Melo, Tomas J. A. [1 ]
机构：
[1] Univ Fed Campina Grande, Dept Mat Engn, BR-58109970 Campina Grande, PB, Brazil
来源：
JOURNAL OF MATERIALS SCIENCE | 2008年 / 43卷 / 13期
关键词：
D O I：
10.1007/s10853-008-2661-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, the effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blends was investigated. The blends were prepared by two processing methods: Injection and Extrusion followed by Injection. The compatibilizers used were polyethylene grafted with acrylic acid (PEgAA) and polyethylene grafted with maleic anhydride (PEgMA). The results showed that in both processing methods the impact strength and elongation at break of the compatibilized blends were greater than those of the uncompatibilized ones. For the blends prepared by injection, the impact strength of PA6/PEgMA/LDPE blend was greater than that of PA6/PEgAA/LDPE blend. For the blends prepared by extrusion followed by injection, the impact strength of the PA6/PEgAA/LDPE blend was greater than that of PA6/PEgMA/LDPE blend. SEM analysis showed that the morphology of the PA6/PEgAA/LDPE blend prepared by extrusion followed by injection was more stable than that of the same blend prepared only by injection.
引用
收藏
页码：4443 / 4449
页数：7
相关论文
共 50 条
  • [31] Correlation of Morphology Evolution with Superior Mechanical Properties in PA6/PS/PP/SEBS Blends Compatibilized by Multi-phase Compatibilizers
    Huanmin Li
    Xianwei Sui
    Xu-Ming Xie
    Chinese Journal of Polymer Science, 2018, (07) : 848 - 858
  • [32] Rheological behavior of compatibilized and non-compatibilized PA6/EPM blends
    Silva, Jorge
    Machado, Ana Vera
    Maia, Joao
    RHEOLOGICA ACTA, 2007, 46 (08) : 1091 - 1097
  • [33] Correlation of Morphology Evolution with Superior Mechanical Properties in PA6/PS/PP/SEBS Blends Compatibilized by Multi-phase Compatibilizers
    Li, Huanmin
    Sui, Xianwei
    Xie, Xu-Ming
    CHINESE JOURNAL OF POLYMER SCIENCE, 2018, 36 (07) : 848 - 858
  • [34] Correlation of Morphology Evolution with Superior Mechanical Properties in PA6/PS/PP/SEBS Blends Compatibilized by Multi-phase Compatibilizers
    Huanmin Li
    Xianwei Sui
    Xu-Ming Xie
    Chinese Journal of Polymer Science, 2018, 36 : 848 - 858
  • [35] Selective localization of rice husk derived graphene in reactive compatibilized PP/PA6 blends: Influence on morphology, interface and mechanical properties
    Tanniru, Monica
    Tambe, Pankaj
    FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES, 2022, 30 (02) : 242 - 257
  • [36] Rheological behavior of compatibilized and non-compatibilized PA6/EPM blends
    Jorge Silva
    Ana Vera Machado
    João Maia
    Rheologica Acta, 2007, 46 : 1091 - 1097
  • [37] Characterization of blends of LDPE and PA6 with functionalized polyethylenes
    Minkova, L
    Yordanov, H
    Filippi, S
    POLYMER, 2002, 43 (23) : 6195 - 6204
  • [38] Effect of ABS types on the morphology and mechanical properties of PA6/ABS blends by in situ reactive extrusion
    Zhao, Dajiang
    Yan, Dongguang
    Fu, Xubing
    Zhang, Na
    Yang, Guisheng
    MATERIALS LETTERS, 2020, 274
  • [39] MECHANICAL PROPERTIES OF NANOCOMPOSITES BASED ON PA6 BLENDS
    Agrawal, Pankaj
    Brito, Gustavo F.
    Cunha, Bartira B.
    Cavalcanti, Shirley N.
    Araujo, Edcleide M.
    Melo, Tomas J. A.
    TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS PROPERTIES, CHARACTERIZATION, AND MODELING, 2012, : 613 - 619
  • [40] Interfacial elasticity of reactively compatibilized PP/PA6 blends
    Barangi, Leila
    Taromi, Faramarz Afshar
    Nazockdast, Hossein
    Sararoudi, Saeed Shafiel
    XVTH INTERNATIONAL CONGRESS ON RHEOLOGY - THE SOCIETY OF RHEOLOGY 80TH ANNUAL MEETING, PTS 1 AND 2, 2008, 1027 : 1075 - 1077
12345