Scratch test analysis of coated and uncoated nitrided steel

被引：33
|
作者：
Kamminga, JD
Alkemade, PFA
Janssen, GCAM
机构：
[1] Netherlands Inst Met Res, NL-2628 AL Delft, Netherlands
[2] Delft Univ Technol, Dept Mat Sci & Technol, NL-2628 AL Delft, Netherlands
来源：
SURFACE & COATINGS TECHNOLOGY | 2004年 / 177卷
关键词：
duplex treatment; nitriding; PAPVD; scratch test; chromium nitride;
D O I：
10.1016/j.surfcoat.2003.09.006
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The mechanical properties of duplex-coated steel, nitrided steel and untreated steel were characterised by means of scratch testing. It was obtained that upon nitriding, the yield stress of steel increases from 2.7 to 7 GPa and the ductility decreases. For the duplex-coated steel, which consists of a 1 mum Cr2N layer on nitrided steel, the adhesion of the Cr2N layer was very good, despite the presence of some iron nitride at the coating-substrate interface. The influence of the Cr2N layer on the mechanical properties of the nitrided steel is discussed. The Cr2N coating slightly affects the hardness of the specimen and the friction of the sliding indenter. However, the crack patterns in the scratch tracks are influenced considerably. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码：284 / 288
页数：5
相关论文
共 50 条
  • [31] Tribological properties of plasma nitrided and hard coated AISI 4140 steel
    Podgornik, B
    Vizintin, J
    Wänstrand, O
    Larsson, M
    Hogmark, S
    Ronkainen, H
    Holmberg, K
    [J]. 9TH NORDIC SYMPOSIUM ON TRIBOLOGY NORDTRIB 2000, VOL 2, 2000, 201 : 457 - 468
  • [32] Tribological behaviour of uncoated steel and fluorocarbon coated steel under dry and lubricated sliding conditions
    Bodhale, Akash Jayant
    Patil, R. B.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 9747 - 9751
  • [33] Tribological properties of plasma nitrided and hard coated AISI 4140 steel
    Podgornik, B
    Vizintin, J
    Wänstrand, O
    Larsson, M
    Hogmark, S
    Ronkainen, H
    Holmberg, K
    [J]. WEAR, 2001, 249 (3-4) : 254 - 259
  • [34] Fretting wear studies on uncoated, plasma nitrided and laser nitrided biomedical titanium alloys
    Vadiraj, Aravind
    Kamaraj, M.
    Gnanamoorthy, R.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 : 446 - 453
  • [35] Haemocompatibility of polymer-coated stainless steel stents as compared to uncoated stents
    Mrowietz, C
    Franke, RP
    Seyfert, UT
    Park, JW
    Jung, F
    [J]. CLINICAL HEMORHEOLOGY AND MICROCIRCULATION, 2005, 32 (02) : 89 - 103
  • [36] SPECTRAL EMITTANCE OF CERAMIC-COATED AND UNCOATED SPECIMENS OF INCONEL AND STAINLESS STEEL
    RICHMOND, JC
    STEWART, JE
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1959, 42 (12) : 633 - 640
  • [37] Machining hardened steel with ceramic-coated and uncoated CBN cutting tools
    Dawson, TG
    Kurfess, TR
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTE OF SME, VOL XXX, 2002, 2002, : 337 - 343
  • [38] The Microgeometry Parameters of Uncoated and Zinc-Coated Cold Rolled Steel Strips
    Bidulska, Jana
    Kvackaj, Tibor
    Bodak, Vladimir
    Bidulsky, Robert
    [J]. JOURNAL OF METALS MATERIALS AND MINERALS, 2007, 17 (02): : 1 - 7
  • [39] Analysis of Wear Using the Taguchi Method in TiSiNOS-Coated and Uncoated H13 Tool Steel
    Alphonse, Mathew
    Murali, Arun Prasad
    Salunkhe, Sachin
    Gawade, Sharad Ramdas
    Naveen Kumar, Boddu V. S. G.
    Nasr, Emad Abouel
    Kamrani, Ali
    [J]. COATINGS, 2023, 13 (10)
  • [40] WEAR AND SCRATCH HARDNESS OF 304 STAINLESS-STEEL INVESTIGATED WITH A SINGLE SCRATCH TEST
    ADLER, TA
    WALTERS, RP
    [J]. WEAR, 1993, 162 : 713 - 720
12345