Scratch test analysis of coated and uncoated nitrided steel

被引：33
|
作者：
Kamminga, JD
Alkemade, PFA
Janssen, GCAM
机构：
[1] Netherlands Inst Met Res, NL-2628 AL Delft, Netherlands
[2] Delft Univ Technol, Dept Mat Sci & Technol, NL-2628 AL Delft, Netherlands
来源：
SURFACE & COATINGS TECHNOLOGY | 2004年 / 177卷
关键词：
duplex treatment; nitriding; PAPVD; scratch test; chromium nitride;
D O I：
10.1016/j.surfcoat.2003.09.006
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The mechanical properties of duplex-coated steel, nitrided steel and untreated steel were characterised by means of scratch testing. It was obtained that upon nitriding, the yield stress of steel increases from 2.7 to 7 GPa and the ductility decreases. For the duplex-coated steel, which consists of a 1 mum Cr2N layer on nitrided steel, the adhesion of the Cr2N layer was very good, despite the presence of some iron nitride at the coating-substrate interface. The influence of the Cr2N layer on the mechanical properties of the nitrided steel is discussed. The Cr2N coating slightly affects the hardness of the specimen and the friction of the sliding indenter. However, the crack patterns in the scratch tracks are influenced considerably. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码：284 / 288
页数：5
相关论文
共 50 条
  • [21] Scratch resistance of low-temperature plasma nitrided and carburized martensitic stainless steel
    Rovani, Ane C.
    Breganon, Rogerio
    de Souza, Gismar S.
    Brunatto, Silvio F.
    Pintaude, Giuseppe
    [J]. WEAR, 2017, 376 : 70 - 76
  • [22] Scratch testing of plasma nitrided and nitrocarburized AISI 321 steel: Influence of the treatment temperature
    Manfrinato, M. D.
    de Almeida, L. S.
    Rossino, L. S.
    Kliauga, A. M.
    Melo-Maximo, L.
    Melo-Maximo, D., V
    Moron, R. C.
    [J]. MATERIALS LETTERS, 2022, 317
  • [23] Comparative wear characteristics of tin and tic coated and uncoated tool steel
    Zeghni, AE
    Hashmi, MSJ
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 : 1923 - 1926
  • [24] Wetting behavior of polymer melts on coated and uncoated tool steel surfaces
    Zitzenbacher, Gernot
    Huang, Zefeng
    Laengauer, Manuel
    Forsich, Christian
    Holzer, Clemens
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (21)
  • [25] Formability evaluation of coated and uncoated steel sheets with consideration of frictional characteristics
    Ko, Dae-Cheol
    Lee, Kyoung-Su
    Lee, Jung-Min
    Kim, Byung-Min
    [J]. ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2, 2007, 340-341 : 581 - +
  • [26] Surface topography effect on galling resistance of coated and uncoated tool steel
    Podgornik, B.
    Jerina, J.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2012, 206 (11-12): : 2792 - 2800
  • [27] TRIBOLOGY PROPERTIES EVALUATION FOR FRICTION PAIR Zn COATED STEEL-TiCN MP COATED/UNCOATED TOOL STEEL
    Evin, Emil
    Tomas, Miroslav
    [J]. ACTA METALLURGICA SLOVACA, 2019, 25 (04): : 208 - 216
  • [28] FIMEC Test to Evaluate the Water Uptake of Coated and Uncoated CFRP Composites
    David, Francesco
    Moretti, Patrizia
    Tagliaferri, Vincenzo
    Trovalusci, Federica
    [J]. MATERIALS, 2020, 13 (05)
  • [29] Design and thermal analysis of coated and uncoated exhaust manifold
    Valarmathi, T. N.
    Sekar, S.
    Purusothaman, M.
    Saravanan, J.
    Balan, K. N.
    Sekar, S. D.
    Mothilal, T.
    [J]. INTERNATIONAL JOURNAL OF AMBIENT ENERGY, 2020, 41 (02) : 157 - 160
  • [30] Design and thermal analysis of coated and uncoated exhaust manifold
    Valarmathi, T.N.
    Sekar, S.
    Purusothaman, M.
    Saravanan, J.
    Balan, K.N.
    Sekar, S.D.
    Mothilal, T.
    [J]. International Journal of Ambient Energy, 2020, 41 (02): : 157 - 160
12345