Scratch test analysis of coated and uncoated nitrided steel

被引：33
|
作者：
Kamminga, JD
Alkemade, PFA
Janssen, GCAM
机构：
[1] Netherlands Inst Met Res, NL-2628 AL Delft, Netherlands
[2] Delft Univ Technol, Dept Mat Sci & Technol, NL-2628 AL Delft, Netherlands
来源：
SURFACE & COATINGS TECHNOLOGY | 2004年 / 177卷
关键词：
duplex treatment; nitriding; PAPVD; scratch test; chromium nitride;
D O I：
10.1016/j.surfcoat.2003.09.006
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The mechanical properties of duplex-coated steel, nitrided steel and untreated steel were characterised by means of scratch testing. It was obtained that upon nitriding, the yield stress of steel increases from 2.7 to 7 GPa and the ductility decreases. For the duplex-coated steel, which consists of a 1 mum Cr2N layer on nitrided steel, the adhesion of the Cr2N layer was very good, despite the presence of some iron nitride at the coating-substrate interface. The influence of the Cr2N layer on the mechanical properties of the nitrided steel is discussed. The Cr2N coating slightly affects the hardness of the specimen and the friction of the sliding indenter. However, the crack patterns in the scratch tracks are influenced considerably. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码：284 / 288
页数：5
相关论文
共 50 条
  • [1] Scratch resistance of CrN coatings on nitrided steel
    Hoy, R
    Kamminga, JD
    Janssen, GCAM
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 200 (12-13): : 3856 - 3860
  • [2] Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel
    Espitia, L. A.
    Dong, Hanshan
    Li, Xiao-Ying
    Pinedo, C. E.
    Tschiptschin, A. P.
    [J]. WEAR, 2017, 376 : 30 - 36
  • [3] Analysis of deformation on coated paperboard during a scratch test by AE
    Suzuki, S
    Fukuzawa, Y
    Nagasawa, S
    Sakayori, H
    Katayama, I
    [J]. ARCHITECTURAL ACOUSTICS AND SOUND REINFORCEMENT, 2002, : 132 - 135
  • [4] Mechanical and structural properties of AISI 8620 steel TiN coated, nitrided and TiN coated plus nitrided
    Efeoglu, I
    Celik, A
    [J]. MATERIALS CHARACTERIZATION, 2001, 46 (04) : 311 - 316
  • [5] Improving the Scratch Test Properties of Plasma-Nitrided Stainless Austenitic Steel by Preliminary Nanostructuring Frictional Treatment
    Lezhnin, N. V.
    Makarov, A. V.
    Gavrilov, N. V.
    Osintseva, A. L.
    Savrai, R. A.
    [J]. MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2018), 2018, 2053
  • [6] Wetting of polymer melts on coated and uncoated steel surfaces
    Vera, Julie
    Contraires, Elise
    Brulez, Anne-Catherine
    Larochette, Mathieu
    Valette, Stephane
    Benayoun, Stephane
    [J]. APPLIED SURFACE SCIENCE, 2017, 410 : 87 - 98
  • [7] Influence of scratch damage to S phase coated and uncoated orthopaedic grade stainless steel on wear of ultrahigh molecular weight polyethylene
    Figueiredo-Pina, C. G.
    Dearnley, P. A.
    [J]. SURFACE ENGINEERING, 2012, 28 (09) : 683 - 692
  • [8] Chromium volatility of coated and uncoated steel interconnects for SOFCs
    Collins, C.
    Lucas, J.
    Buchanan, T. L.
    Kopczyk, M.
    Kayani, A.
    Gannon, P. E.
    Deibert, M. C.
    Smith, R. J.
    Choi, D. -S.
    Gorokhovsky, V. I.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 201 (07): : 4467 - 4470
  • [9] Wear of coated and uncoated carbides in turning tool steel
    Haron, CC
    Ginting, A
    Goh, JH
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 116 (01) : 49 - 54
  • [10] Multipass Scratch Behavior of Borided and Nitrided H13 Steel
    R. C. Vega-Morón
    G. A. Rodríguez-Castro
    L. F. Jiménez-Tinoco
    A. Meneses-Amador
    J. V. Méndez-Méndez
    J. Escobar-Hernández
    C. D. Reséndiz-Calderón
    J. L. Nava-Sánchez
    [J]. Journal of Materials Engineering and Performance, 2018, 27 : 3886 - 3899
12345