Galactitol hexa stearate and galactitol hexa palmitate as novel solid-liquid phase change materials for thermal energy storage

被引:46
|
作者
Sari, Ahmet [1 ]
Bicer, Alper [1 ]
Lafci, Ozgur [1 ]
Ceylan, Mustafa [1 ]
机构
[1] Gaziosmanpasa Univ, Dept Chem, TR-60150 Tokat, Turkey
关键词
Stearic acid; Palmitic acid; Galactitol; PCM; Thermal energy storage; Thermal reliability; LATENT-HEAT STORAGE; FATTY-ACIDS; SYSTEM; PCM; ERYTHRITOL; COMPOSITE; ESTERS; FIBERS; SERIES;
D O I
10.1016/j.solener.2011.05.014
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Galactitol has a melting point of 187.41 degrees C and a fusion enthalpy of 401.76 J g(-1). Its melting temperature is not suitable for many thermal energy storage applications although it has good latent heat storage capacity compared to the several traditional phase change materials (PCMs). The galactitol also has high supercooling degree as about 72 degrees C. These unfavorable properties limit the usage potential of galactitol in thermal energy storage applications. However, the phase change temperature and supercooling degree of galactitol can be reduced to a reasonable value and therefore its feasibility for energy storage systems can be increased. For this aim, in this study, galactitol hexa stearate (GHS) and galactitol hexa palmitate (GHP) were prepared as novel solid liquid PCM by means of esterification reaction of the galactitol with palmitic acid and stearic acid. The GHP and GHS esters were characterized chemically using FT-IR and H-1 NMR techniques. By using DSC analysis method, the melting temperature and latent heat value of the PCMs were determined as 31.78 degrees C and 201.66 J g(-1) for GHP ester and 47.79 degrees C and 251.05 J g(-1) for GHS ester. Thermal cycling test showed that the prepared PCMs had good thermal reliability after thermal 1000 melting freezing cycles. Thermogravimetric analysis (TGA) results revealed that the PCMs have good thermal stability over their working temperatures. In addition, thermal conductivity of the prepared PCMs was increased as about 26.3% for GHP and 53.3% for GHS by addition of 5 wt.% expanded graphite. Based on all results it can be concluded that the prepared GHP and GHS esters can be considered as promising solid liquid PCMs for many energy storage applications such as solar energy storage, indoor temperature controlling in buildings, production of smart textile and insulation clothing due to their good energy storage properties. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2061 / 2071
页数:11
相关论文
共 50 条
  • [41] Linear polyurethane ionomers as solid-solid phase change materials for thermal energy storage
    Chen, Kai
    Liu, Ruowang
    Zou, Chao
    Shao, Qinyi
    Lan, Yunjun
    Cai, Xiaoqing
    Zhai, Lanlan
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2014, 130 : 466 - 473
  • [42] Solid-liquid phase equilibria of stearic acid and dicarboxylic acids binary mixtures as low temperature thermal energy storage materials
    Ma, Guixiang
    Sun, Jinhe
    Xie, Shaolei
    Wang, Zhao
    Jing, Yan
    Jia, Yongzhong
    [J]. JOURNAL OF CHEMICAL THERMODYNAMICS, 2018, 120 : 60 - 71
  • [43] Simulation of solid-liquid phase change at pore scale using lattice Boltzmann method with central moments in thermal energy storage
    Yin, Maobin
    Wang, Meng
    Huo, Yutao
    Rao, Zhonghao
    [J]. JOURNAL OF ENERGY STORAGE, 2022, 49
  • [44] Facile synthesis and thermal performance of cety palmitate/nickel foam composite phase change materials for thermal energy storage
    Wang, Chaoming
    Wang, Tingjun
    Hu, Zhanjiang
    Cai, Zhengyu
    [J]. JOURNAL OF ENERGY STORAGE, 2020, 28
  • [45] Ag-coated polyurethane fibers membranes absorbed with quinary fatty acid eutectics solid-liquid phase change materials for storage and retrieval of thermal energy
    Ke, Huizhen
    Ghulam, Mohy Uddin Hafiz
    Li, Yonggui
    Wang, Jing
    Peng, Bin
    Cai, Yibing
    Wei, Qufu
    [J]. RENEWABLE ENERGY, 2016, 99 : 1 - 9
  • [46] Review on solid-solid phase change materials for thermal energy storage: Molecular structure and thermal properties
    Fallahi, Ali
    Guldentops, Gert
    Tao, Mingjiang
    Granados-Focil, Sergio
    Van Dessel, Steven
    [J]. APPLIED THERMAL ENGINEERING, 2017, 127 : 1427 - 1441
  • [47] Moving solid-liquid interface-based measurement method for thermal conductivity determination of phase change materials in liquid phase
    Zhou, Tian
    Ma, Xiaoyi
    Yuan, Jie
    Zheng, Nianben
    Sun, Zhiqiang
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2020, 113
  • [48] Thermal energy storage properties of polyethylene glycol grafted styrenic copolymer as novel solid-solid phase change materials
    Sari, Ahmet
    Bicer, Alper
    Alkan, Cemil
    [J]. INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2020, 44 (05) : 3976 - 3989
  • [49] A REVIEW OF THE APPLICATION OF SOLID-LIQUID PHASE CHANGE MATERIALS IN WATER HEATERS
    Wang, Chao
    Jia, Xiaoya
    Zhao, Peng
    Wang, Liangbing
    Shi, Liming
    [J]. THERMAL SCIENCE, 2024, 28 (01): : 409 - 424
  • [50] Preparation and thermal reliability of methyl palmitate/methyl stearate mixture as a novel composite phase change material
    Xu, Su
    Zou, Liming
    Ling, Xinlong
    Wei, Yizhe
    Zhang, Shengkai
    [J]. ENERGY AND BUILDINGS, 2014, 68 : 372 - 375