Galactitol hexa stearate and galactitol hexa palmitate as novel solid-liquid phase change materials for thermal energy storage

被引:46
|
作者
Sari, Ahmet [1 ]
Bicer, Alper [1 ]
Lafci, Ozgur [1 ]
Ceylan, Mustafa [1 ]
机构
[1] Gaziosmanpasa Univ, Dept Chem, TR-60150 Tokat, Turkey
关键词
Stearic acid; Palmitic acid; Galactitol; PCM; Thermal energy storage; Thermal reliability; LATENT-HEAT STORAGE; FATTY-ACIDS; SYSTEM; PCM; ERYTHRITOL; COMPOSITE; ESTERS; FIBERS; SERIES;
D O I
10.1016/j.solener.2011.05.014
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Galactitol has a melting point of 187.41 degrees C and a fusion enthalpy of 401.76 J g(-1). Its melting temperature is not suitable for many thermal energy storage applications although it has good latent heat storage capacity compared to the several traditional phase change materials (PCMs). The galactitol also has high supercooling degree as about 72 degrees C. These unfavorable properties limit the usage potential of galactitol in thermal energy storage applications. However, the phase change temperature and supercooling degree of galactitol can be reduced to a reasonable value and therefore its feasibility for energy storage systems can be increased. For this aim, in this study, galactitol hexa stearate (GHS) and galactitol hexa palmitate (GHP) were prepared as novel solid liquid PCM by means of esterification reaction of the galactitol with palmitic acid and stearic acid. The GHP and GHS esters were characterized chemically using FT-IR and H-1 NMR techniques. By using DSC analysis method, the melting temperature and latent heat value of the PCMs were determined as 31.78 degrees C and 201.66 J g(-1) for GHP ester and 47.79 degrees C and 251.05 J g(-1) for GHS ester. Thermal cycling test showed that the prepared PCMs had good thermal reliability after thermal 1000 melting freezing cycles. Thermogravimetric analysis (TGA) results revealed that the PCMs have good thermal stability over their working temperatures. In addition, thermal conductivity of the prepared PCMs was increased as about 26.3% for GHP and 53.3% for GHS by addition of 5 wt.% expanded graphite. Based on all results it can be concluded that the prepared GHP and GHS esters can be considered as promising solid liquid PCMs for many energy storage applications such as solar energy storage, indoor temperature controlling in buildings, production of smart textile and insulation clothing due to their good energy storage properties. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2061 / 2071
页数:11
相关论文
共 50 条
  • [31] Phase change materials for thermal energy storage
    Pielichowska, Kinga
    Pielichowski, Krzysztof
    [J]. PROGRESS IN MATERIALS SCIENCE, 2014, 65 : 67 - 123
  • [32] Enthalpy of Solid-Liquid Phase Change Confined in Porous Materials
    Wu, Yuping
    Wang, Tao
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2016, 55 (44) : 11536 - 11541
  • [33] Review of solid-liquid phase change materials and their encapsulation technologies
    Su, Weiguang
    Darkwa, Jo
    Kokogiannakis, Georgios
    [J]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2015, 48 : 373 - 391
  • [34] Synthesis and characterization of novel solid-solid phase change materials with a polyurethaneurea copolymer structure for thermal energy storage
    Chen, Changzhong
    Liu, Wenmin
    Wang, Hongwei
    Zhu, Lanlan
    [J]. RSC ADVANCES, 2016, 6 (105): : 102997 - 103005
  • [35] Synthesis and thermal energy storage properties of the polyurethane solid-solid phase change materials with a novel tetrahydroxy compound
    Xi, Peng
    Duan, Yuqing
    Fei, Pengfei
    Xia, Lei
    Liu, Ran
    Cheng, Bowen
    [J]. EUROPEAN POLYMER JOURNAL, 2012, 48 (07) : 1295 - 1303
  • [36] Temperature leveling of electronic chips by solid-solid phase change materials compared to solid-liquid phase change materials
    Baba, Masaaki
    Nemoto, Kosei
    Otaki, Daiki
    Sasaki, Takuto
    Takeda, Masatoshi
    Yamada, Noboru
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 179
  • [37] Thermal properties of multicomponent fatty acids as solid-liquid phase change materials for cooling applications
    Matsui, Tsutomu
    Yoshida, Masahiro
    Yamasaki, Hiroshi
    Hatate, Yasuo
    [J]. CHEMICAL ENGINEERING COMMUNICATIONS, 2007, 194 (01) : 129 - 139
  • [38] Effect of carbon nanotube interfacial geometry on thermal transport in solid-liquid phase change materials
    Warzoha, Ronald J.
    Fleischer, Amy S.
    [J]. APPLIED ENERGY, 2015, 154 : 271 - 276
  • [39] Harvesting environmental thermal energy using solid/liquid phase change materials
    Wang, Guangyao
    Ha, Dong Sam
    Wang, Kevin G.
    [J]. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2018, 29 (08) : 1632 - 1648
  • [40] Recent developments in solid-solid phase change materials for thermal energy storage applications
    Zhi, Maoyong
    Yue, Shan
    Zheng, Lingling
    Su, Bingjian
    Fu, Ju
    Sun, Qiang
    [J]. JOURNAL OF ENERGY STORAGE, 2024, 89