In-situ High Temperature Straining Tests to Study Welding Solid State Cracking Phenomena

被引：3
|
作者：
Torres, E. A. [1 ]
Peternella, F. G. [1 ]
Ramirez, A. J. [1 ]
Caram, R. [2 ]
机构：
[1] Brazilian Synchrotron Light Lab LNLS, Campinas, SP, Brazil
[2] State Univ Campinas UNICAMP, Campinas, SP, Brazil
来源：
TRENDS IN WELDING RESEARCH | 2009年
关键词：
DUCTILITY-DIP CRACKING; PART I;
D O I：
10.1361/cp2008twr354
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An in-situ high temperature deformation experiment was developed and adapted to be performed within the vacuum chamber of a scanning electron microscope in order to study the high temperature cracking phenomenon known as ductility-dip cracking (DDC). The experimental setup and parameters were optimized to study the deformation of Ni-base alloys AWS A5.14 ERNiCrFe-7 and ERNiCr-3 at temperatures ranging from 700 and 1000 degrees C. The performed experiments come to help elucidate the fundamentals of the high temperature deformation and ductility-dip cracking phenomenon in such alloys. Moreover, the developed instrumentation is a powerful tool to perform several qualitative and quantitative room and high temperature deformation and cracking phenomena studies.
引用
收藏
页码：354 / +
页数：2
相关论文
共 50 条
  • [21] Study of dislocations in NiAl through the use of in-situ straining in transmission electron microscopy
    Ghosh, B
    Crimp, MA
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 240 : 142 - 149
  • [22] Electrical discharge phenomena application for solid fossil fuels in-situ conversion
    Bukharkin, A. A.
    Lopatin, V. V.
    Martemyanov, S. M.
    Koryashov, I. A.
    INTERNATIONAL CONGRESS ON ENERGY FLUXES AND RADIATION EFFECTS (EFRE-2014), 2014, 552
  • [23] In-Situ Welding Carbon Nanotubes into a Porous Solid with Super-High Compressive Strength and Fatigue Resistance
    Lin, Zhiqiang
    Gui, Xuchun
    Gan, Qiming
    Chen, Wenjun
    Cheng, Xiaoping
    Liu, Ming
    Zhu, Yuan
    Yang, Yanbing
    Cao, Anyuan
    Tang, Zikang
    SCIENTIFIC REPORTS, 2015, 5
  • [24] In-Situ Welding Carbon Nanotubes into a Porous Solid with Super-High Compressive Strength and Fatigue Resistance
    Zhiqiang Lin
    Xuchun Gui
    Qiming Gan
    Wenjun Chen
    Xiaoping Cheng
    Ming Liu
    Yuan Zhu
    Yanbing Yang
    Anyuan Cao
    Zikang Tang
    Scientific Reports, 5
  • [25] High-temperature in situ straining experiments in the high-voltage electron microscope
    Messerschmidt, U
    Baither, D
    Bartsch, M
    Baufeld, B
    Geyer, B
    Guder, S
    Wasilkowska, A
    Czyrska-Filemonowicz, A
    Yamaguchi, M
    Feuerbacher, M
    Urban, K
    MICROSCOPY AND MICROANALYSIS, 1998, 4 (03) : 226 - 234
  • [26] An in-situ study of static recrystallization in Mg using high temperature EBSD
    Xu Ye
    Zhe Suo
    Zhonghao Heng
    Biao Chen
    Qiuming Wei
    Junko Umeda
    Katsuyoshi Kondoh
    Jianghua Shen
    Journal of Magnesium and Alloys, 2024, 12 (04) : 1419 - 1430
  • [27] In-situ high temperature X-ray diffraction study of dickite
    Yan, Yu
    Wang, Hejing
    APPLIED CLAY SCIENCE, 2018, 163 : 137 - 145
  • [28] An in-situ study of static recrystallization in Mg using high temperature EBSD
    Ye, Xu
    Suo, Zhe
    Heng, Zhonghao
    Chen, Biao
    Wei, Qiuming
    Umeda, Junko
    Kondoh, Katsuyoshi
    Shen, Jianghua
    JOURNAL OF MAGNESIUM AND ALLOYS, 2024, 12 (04) : 1419 - 1430
  • [29] Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique
    Bakir, Nasim
    Gumenyuk, Andrey
    Rethmeier, Michael
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2018, 23 (03) : 234 - 240
  • [30] In-situ Raman spectroscopic study of phase transition at high temperature and high pressure.
    Zhou XingZhi
    Zheng HaiFei
    Sun Qiang
    ACTA PETROLOGICA SINICA, 2006, 22 (12) : 3047 - 3051
12345