The formation mechanisms of high burnup structure in UO2 fuel

被引:8
|
作者
Xiao, Hongxing [1 ]
Long, Chongsheng [1 ]
Chen, Hongsheng [2 ]
机构
[1] Nucl Power Inst China, Sci & Technol Reactor Fuel & Mat Lab, Chengdu, Peoples R China
[2] Harbin Inst Technol Shenzhen, Inst Special Environm Phys Sci, Shenzhen, Peoples R China
基金
中国国家自然科学基金;
关键词
UO2; fuel; High burnup structure; Formation mechanisms; IRRADIATION-INDUCED RECRYSTALLIZATION; RADIATION-INDUCED AMORPHIZATION; RIM STRUCTURE; GRAIN SUBDIVISION; MICROSTRUCTURAL EVOLUTION; ELECTRON-MICROSCOPY; XENON-DEPLETION; PORE FORMATION; UP STRUCTURE; MODEL;
D O I
10.1016/j.jnucmat.2021.153151
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The formation process of high burnup structure (HBS) in UO2 fuel is accompanied by the subdivision of original grains and the formation of fission gas bubbles, which can accelerate the fission gas swelling and release, and correspondingly raises some safety concerns over the extension of operating life of the nuclear fuel in the reactor. The UO2 fuel specimens were irradiated up to a maximum burnup of 120 GW.d/tU in High Flux Engineering Testing Reactor (HFETR) of Nuclear Power Institute of China (NPIC). High resolution scanning electron microscope (SEM) observations were carried out in the fuel specimens with different local burnups of 48-120 GWmiddotd/tU. Our results show that there exist two restructuring mechanisms during the formation of the HBS in UO2 fuel matrix: polygonization and recrystallization. Furthermore, a comparison with earlier experiments published at the CEA of France suggests that the deposition of fission fragments and recoil particles is the main mechanism responsible for the formation of small grains on the inner wall of large bubbles. (C) 2021 Elsevier B.V. All rights reserved.
引用
收藏
页数:3
相关论文
共 50 条
  • [41] ACHIEVING BURNUP STABLE PROPERTIES OF UO2 FUEL BY DEFINED INFLUENCE ON MICROSTRUCTURE
    HENKE, M
    KLEMM, U
    SOBEK, D
    KERNENERGIE, 1986, 29 (01): : 15 - 21
  • [42] RAPID model to predict radial burnup distribution in LWR UO2 fuel
    Lee, CB
    Kim, DH
    Song, JS
    Bang, JG
    Jung, YH
    JOURNAL OF NUCLEAR MATERIALS, 2000, 282 (2-3) : 196 - 204
  • [43] Formation of nanostructures in UO2 fuel at high burn-ups
    Szuta, M
    Bocar, L
    ACTA PHYSICA POLONICA A, 2002, 102 (02) : 207 - 213
  • [44] MICROSTRUCTURAL CHANGE AND ITS INFLUENCE ON FISSION-GAS RELEASE IN HIGH BURNUP UO2 FUEL
    UNE, K
    NOGITA, K
    KASHIBE, S
    IMAMURA, M
    JOURNAL OF NUCLEAR MATERIALS, 1992, 188 : 65 - 72
  • [45] Post-irradiation examination of high burnup Mg doped UO2 in comparison with undoped UO2, Mg-Nb doped UO2 and Ti doped UO2
    Fujino, T
    Shiratori, T
    Sato, N
    Fukuda, K
    Yamada, K
    Serizawa, H
    JOURNAL OF NUCLEAR MATERIALS, 2001, 297 (02) : 176 - 205
  • [46] THE RADIAL-DISTRIBUTION OF PLUTONIUM IN HIGH BURNUP UO2 FUELS
    LASSMANN, K
    OCARROLL, C
    VANDELAAR, J
    WALKER, CT
    JOURNAL OF NUCLEAR MATERIALS, 1994, 208 (03) : 223 - 231
  • [47] Three-dimensional bubble reconstruction in high burnup UO2
    McKinney, Casey
    Seibert, Rachel
    Helmreich, Grant
    Aitkaliyeva, Assel
    Terrani, Kurt
    JOURNAL OF NUCLEAR MATERIALS, 2020, 532
  • [48] Formation of the rim structure in high burnup fuel
    Matzke, H
    Spino, J
    JOURNAL OF NUCLEAR MATERIALS, 1997, 248 : 170 - 179
  • [49] Packaging of high burnup UO2 and MOX spent fuel considering temperature restrictions in the near field of a repository
    McGinnes, DF
    Schneider, JW
    SCIENTIFIC BASIS FOR NUCLEAR WASTE MANAGEMENT XXI, 1998, 506 : 927 - 928
  • [50] Fission gas release behavior of high burnup UO2 fuel under reactivity initiated accident conditions
    Sasajima, H
    Nakamura, J
    Fuketa, T
    Uetsuka, H
    JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 1999, 36 (11) : 1101 - 1104