The formation mechanisms of high burnup structure in UO2 fuel

被引:8
|
作者
Xiao, Hongxing [1 ]
Long, Chongsheng [1 ]
Chen, Hongsheng [2 ]
机构
[1] Nucl Power Inst China, Sci & Technol Reactor Fuel & Mat Lab, Chengdu, Peoples R China
[2] Harbin Inst Technol Shenzhen, Inst Special Environm Phys Sci, Shenzhen, Peoples R China
基金
中国国家自然科学基金;
关键词
UO2; fuel; High burnup structure; Formation mechanisms; IRRADIATION-INDUCED RECRYSTALLIZATION; RADIATION-INDUCED AMORPHIZATION; RIM STRUCTURE; GRAIN SUBDIVISION; MICROSTRUCTURAL EVOLUTION; ELECTRON-MICROSCOPY; XENON-DEPLETION; PORE FORMATION; UP STRUCTURE; MODEL;
D O I
10.1016/j.jnucmat.2021.153151
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The formation process of high burnup structure (HBS) in UO2 fuel is accompanied by the subdivision of original grains and the formation of fission gas bubbles, which can accelerate the fission gas swelling and release, and correspondingly raises some safety concerns over the extension of operating life of the nuclear fuel in the reactor. The UO2 fuel specimens were irradiated up to a maximum burnup of 120 GW.d/tU in High Flux Engineering Testing Reactor (HFETR) of Nuclear Power Institute of China (NPIC). High resolution scanning electron microscope (SEM) observations were carried out in the fuel specimens with different local burnups of 48-120 GWmiddotd/tU. Our results show that there exist two restructuring mechanisms during the formation of the HBS in UO2 fuel matrix: polygonization and recrystallization. Furthermore, a comparison with earlier experiments published at the CEA of France suggests that the deposition of fission fragments and recoil particles is the main mechanism responsible for the formation of small grains on the inner wall of large bubbles. (C) 2021 Elsevier B.V. All rights reserved.
引用
收藏
页数:3
相关论文
共 50 条
  • [31] Pore pressure and swelling in the rim region of LWR high burnup UO2 fuel
    Koo, YH
    Lee, BH
    Cheon, JS
    Sohn, DS
    JOURNAL OF NUCLEAR MATERIALS, 2001, 295 (2-3) : 213 - 220
  • [33] MECHANISMS OF LEACHING AND DISSOLUTION OF UO2 FUEL
    JOHNSON, LH
    SHOESMITH, DW
    LUNANSKY, GE
    BAILEY, MG
    TREMAINE, PR
    NUCLEAR TECHNOLOGY, 1982, 56 (02) : 238 - 253
  • [34] Development of the MFPR/R code for characterization of the rim zone and high burnup structure evolution in UO2 fuel pellets
    Tarasov, V. I.
    Polovnikov, P. V.
    Shestak, V. E.
    Veshchunov, M. S.
    JOURNAL OF NUCLEAR MATERIALS, 2019, 517 : 214 - 224
  • [35] POST-IRRADIATION EXAMINATION OF HIGH-BURNUP MOTEN UO2 FUEL RODS
    LYONS, MF
    WEIDENBA.B
    BOYLE, RF
    PASHOS, TJ
    TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY, 1965, 8 (01): : 42 - &
  • [36] HIGH BURNUP PERFORMANCE OF ANNULAR UO2 FUEL WITH INTER-PELLET GRAPHITE DISKS
    HASTINGS, IJ
    MACDONALD, RD
    JOURNAL OF NUCLEAR MATERIALS, 1984, 126 (02) : 177 - 180
  • [37] COSMOS:: A computer code to analyze LWR UO2 and MOX fuel up to high burnup
    Koo, YH
    Lee, BH
    Sohn, DS
    ANNALS OF NUCLEAR ENERGY, 1999, 26 (01) : 47 - 67
  • [38] A pore pressure model and cracking strength analysis on the UO2 high burnup structure
    Cao, Xicheng
    Yang, Shuo
    Lv, Junnan
    Li, Qun
    NUCLEAR ENGINEERING AND DESIGN, 2023, 412
  • [39] Young's modulus evaluation of high burnup structure in UO2 with nanometer resolution
    Terrani, Kurt A.
    Balooch, Mehdi
    Burns, Joseph R.
    Smith, Quinlan B.
    JOURNAL OF NUCLEAR MATERIALS, 2018, 508 : 33 - 39
  • [40] Rim structure formation of isothermally irradiated UO2 fuel discs
    Une, K
    Nogita, K
    Shiratori, T
    Hayashi, K
    JOURNAL OF NUCLEAR MATERIALS, 2001, 288 (01) : 20 - 28