Influence of Y and Zr on TiAl43Nb4Mo1B0.1 titanium aluminide microstructure and properties

被引：5
|
作者：
Bazhenov, V. E. [1 ]
Kuprienko, V. S. [1 ]
Fadeev, A., V [1 ]
Bazlov, A., I [2 ]
Belov, V. D. [1 ]
Titov, A. Yu [1 ]
Koltygin, A., V [1 ]
Komissarov, A. A. [3 ]
Plisetskaya, I., V [1 ]
Logachev, I. A. [4 ]
机构：
[1] Natl Univ Sci & Technol MISiS, Foundry Dept, Leninskiy Pr 4, Moscow 119049, Russia
[2] Natl Univ Sci & Technol MISiS, Lab Adv Green Mat, Moscow, Russia
[3] Natl Univ Sci & Technol MISiS, Lab Hybrid Nanostruct Mat, Moscow, Russia
[4] JSC Kompozit, Metall Mat & Met Technol Dept, Korolev, Russia
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2020年 / 36卷 / 05期
关键词：
Titanium aluminide; intermetallics; TNM-B1; heat resistance; mechanical properties; MECHANICAL-PROPERTIES; OXIDATION RESISTANCE; DEFORMATION; IMPROVEMENT; BEHAVIOR; YTTRIUM; DESIGN; PHASES; CR;
D O I：
10.1080/02670836.2020.1716493
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of the addition of 2.3 at.-% Y and of 0.8 at.-% Zr + 0.2 at.-% Y on the properties of TiAl43Nb4Mo1B0.1 (TNM-B1) titanium aluminide alloy is investigated. Energy-dispersive X-ray spectroscopy analysis shows that the Y content of the beta, gamma, and alpha(2) phases is low, and nearly all of the Y is in the Al2Y phase. The Zr content in the alloy phases is the same as that in alloy. Tensile tests show that Y addition decreases tensile strength and elongation, but only minor effects on these properties are observed after the addition of Zr and Y. It is shown that the addition of Y leads to a decrease in the heat resistance of TiAl43Nb4Mo1B0.1 alloy at 900 degrees C.
引用
收藏
页码：548 / 555
页数：8
相关论文
共 50 条
  • [41] Effect of growth rate on microstructure and microhardness of directionally solidified Ti-44Al-5Nb-1.5Cr-1.5Zr-1Mo-0.1B alloy
    Zhi-ping Li
    Hong-ying Xia
    Liang-shun Luo
    Bin-bin Wang
    Liang Wang
    Yan-qing Su
    Jing-jie Guo
    Heng-zhi Fu
    China Foundry, 2020, 17 (04) : 293 - 300
  • [42] Effect of growth rate on microstructure and microhardness of directionally solidified Ti-44Al-5Nb-1.5Cr-1.5Zr-1Mo-0.1B alloy
    Zhi-ping Li
    Hong-ying Xia
    Liang-shun Luo
    Bin-bin Wang
    Liang Wang
    Yan-qing Su
    Jing-jie Guo
    Heng-zhi Fu
    China Foundry, 2020, 17 : 293 - 300
  • [43] Microstructure evolution and grain refinement during hot deformation of Ti-44Al-4Nb-1.5Cr-0.1Mo-0.1B alloy
    Liu, S. Q.
    Shen, J.
    MATERIALS RESEARCH EXPRESS, 2018, 5 (09):
  • [44] Experimental Investigation on Microstructure and Mechanical Properties of Laser-Welded Nb-1% Zr-0.1% C Alloy
    Santosh Kumar Gupta
    Sanjib Jaypuria
    Dilip Kumar Pratihar
    Partha Saha
    Journal of Materials Engineering and Performance, 2021, 30 : 8412 - 8425
  • [45] Experimental Investigation on Microstructure and Mechanical Properties of Laser-Welded Nb-1% Zr-0.1% C Alloy
    Gupta, Santosh Kumar
    Jaypuria, Sanjib
    Pratihar, Dilip Kumar
    Saha, Partha
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (11) : 8412 - 8425
  • [46] Influence of the autocombustion synthesis conditions and the calcination temperature on the microstructure and electrochemical properties of BaCe0.8Zr0.1Y0.1O3-δ electrolyte material
    Thabet, K.
    Devisse, M.
    Quarez, E.
    Joubert, O.
    La Salle, A. Le Gal
    SOLID STATE IONICS, 2018, 325 : 48 - 56
  • [47] Influence of valence electron concentration on elastic properties of RRh3B (R=Y, Zr, and Nb)
    Music, Denis
    Schneider, Jochen M.
    APPLIED PHYSICS LETTERS, 2006, 89 (12)
  • [48] Mechanical properties, deformation behavior and microstructure evolution of Ti-43Al-6Nb-1Mo-1Cr alloys
    Li, Mingao
    Xiao, Shulong
    Xu, Lijuan
    Chen, Yuyong
    Tian, Jing
    Zhang, Baoyou
    MATERIALS CHARACTERIZATION, 2018, 136 : 69 - 83
  • [49] Solidification Microstructure and Mechanical Properties of Laser Additive Manufactured Near-α Ti-6Al-3Nb-2Zr-1Mo Titanium Alloy
    Yang, Zhijun
    Jia, Yuanyuan
    Zhang, Ye
    Hou, Shusen
    Sun, Ningbo
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025, 34 (03) : 2208 - 2218
  • [50] Microstructure and tensile properties of cast Ti-44Al-4Nb-4Hf-0.1Si-0.1B alloy with refined lamellar microstructures
    Hu, D.
    Jiang, H.
    Wu, X.
    INTERMETALLICS, 2009, 17 (09) : 744 - 748
12345