Influence of Y and Zr on TiAl43Nb4Mo1B0.1 titanium aluminide microstructure and properties

被引：5
|
作者：
Bazhenov, V. E. [1 ]
Kuprienko, V. S. [1 ]
Fadeev, A., V [1 ]
Bazlov, A., I [2 ]
Belov, V. D. [1 ]
Titov, A. Yu [1 ]
Koltygin, A., V [1 ]
Komissarov, A. A. [3 ]
Plisetskaya, I., V [1 ]
Logachev, I. A. [4 ]
机构：
[1] Natl Univ Sci & Technol MISiS, Foundry Dept, Leninskiy Pr 4, Moscow 119049, Russia
[2] Natl Univ Sci & Technol MISiS, Lab Adv Green Mat, Moscow, Russia
[3] Natl Univ Sci & Technol MISiS, Lab Hybrid Nanostruct Mat, Moscow, Russia
[4] JSC Kompozit, Metall Mat & Met Technol Dept, Korolev, Russia
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2020年 / 36卷 / 05期
关键词：
Titanium aluminide; intermetallics; TNM-B1; heat resistance; mechanical properties; MECHANICAL-PROPERTIES; OXIDATION RESISTANCE; DEFORMATION; IMPROVEMENT; BEHAVIOR; YTTRIUM; DESIGN; PHASES; CR;
D O I：
10.1080/02670836.2020.1716493
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of the addition of 2.3 at.-% Y and of 0.8 at.-% Zr + 0.2 at.-% Y on the properties of TiAl43Nb4Mo1B0.1 (TNM-B1) titanium aluminide alloy is investigated. Energy-dispersive X-ray spectroscopy analysis shows that the Y content of the beta, gamma, and alpha(2) phases is low, and nearly all of the Y is in the Al2Y phase. The Zr content in the alloy phases is the same as that in alloy. Tensile tests show that Y addition decreases tensile strength and elongation, but only minor effects on these properties are observed after the addition of Zr and Y. It is shown that the addition of Y leads to a decrease in the heat resistance of TiAl43Nb4Mo1B0.1 alloy at 900 degrees C.
引用
收藏
页码：548 / 555
页数：8
相关论文
共 50 条
  • [11] Improved formability and microstructure of laser powder bed fusion Ti-43Al-4Nb-1Mo-0.1B alloy with circular beam oscillation
    Gao, Piao
    Cao, Longchao
    Dong, Yuang
    Wang, Zemin
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 130 : 35 - 47
  • [12] Microstructure, processing and mechanical properties of a titanium alloy Ti-20Zr-6.5Al-3.3Mo-0.3Si-0.1B
    Imayev, V. M.
    Gaisin, R. A.
    Gaisina, E. R.
    Imayev, R. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 696 : 137 - 145
  • [13] Influence of Heat Treatment on the Microstructure and Physicomechanical Properties of Titanium Alloys of the Ti−Nb−Mo system
    О. М. Myslyvchenko
    А. А. Bondar
    N. І. Tsyganenko
    V. М. Petyukh
    Yu. F. Lugovskyi
    V. F. Gorban
    Materials Science, 2021, 56 : 481 - 490
  • [14] Microstructure and Mechanical Properties of Novel Ti-Al-V-Zr-Mo-Nb Cryogenic Titanium Alloy
    Lu Zichuan
    Sun Yachao
    Yao Caogen
    Li Shenggang
    Hou Zhimin
    Zhang Xuhu
    Ji Wei
    Zhang Haiyang
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (01) : 217 - 224
  • [15] Microstructure and Mechanical Properties of Novel Ti-Al-V-Zr-Mo-Nb Cryogenic Titanium Alloy
    Lu, Zichuan
    Sun, Yachao
    Yao, Caogen
    Li, Shenggang
    Hou, Zhimin
    Zhang, Xuhu
    Ji, Wei
    Zhang, Haiyang
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2022, 51 (01): : 217 - 224
  • [16] Superplastic properties of γ+α2 titanium aluminide alloy Ti-43Al-(Nb,Mo,B) in cast plus post-solidification heat treated condition
    Imayev, V. M.
    Imayev, R. M.
    Khismatullin, T. G.
    Salishchev, G. A.
    SUPERPLASTICITY IN ADVANCED MATERIALS, 2007, 551-552 : 447 - +
  • [17] Effects of Zr and Y on the Mechanical Properties and the Microstructure of Ti-Al-Sn-Nb-Mo-Si Alloy
    Qin Kuiqing Wang Lida Tang Shisheng General Research Institute for Non-ferrous metals
    Rare Metals, 1990, (01) : 39 - 45
  • [18] Influence of Heat Treatment on the Microstructure and Physicomechanical Properties of Titanium Alloys of the Ti-Nb-Mo system
    Myslyvchenko, O. M.
    Bondar, A. A.
    Tsyganenko, N., I
    Petyukh, V. M.
    Lugovskyi, Yu F.
    Gorban, V. F.
    MATERIALS SCIENCE, 2021, 56 (04) : 481 - 490
  • [19] Effects of thermal exposure on the microstructure and properties of a γ-TiAl based alloy containing 44Al-4Nb-4Zr-0.2Si-0.3B
    Cheng, TT
    INTERMETALLICS, 1999, 7 (09) : 995 - 999
  • [20] Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy
    San Juan, J.
    Simas, P.
    Schmoelzer, T.
    Clemens, H.
    Mayer, S.
    Nó, M.L.
    Acta Materialia, 2014, 65 : 338 - 350
12345