ULCOS top gas recycling blast furnace

被引：0
|
作者：
Hirsch, Alexandra [1 ]
van der Stel, Jan [2 ]
Sert, Dominique [3 ]
机构：
[1] ThyssenKrupp Steel Europe AG, Ironmaking Technol, Duisburg, Germany
[2] Tata Steel Europe, Tata Res Dev & Technol, Ijmuiden, Netherlands
[3] Arcelor Mittal, Global Res & Dev, Maizieres Les Metz, France
来源：
STAHL UND EISEN | 2012年 / 132卷 / 04期
关键词：
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The ULCOS blast furnace process (ULCOS BF) aims at minimizing the CO2 emission of the blast furnace by at least 50 % This process is based on the replacement of hot blast by cold oxygen, the recycling of decarbonated top gas into the lower shaft and normal tuyeres, the capture of CO2 and its storage in a geological trap (full CCS process). The ULCOS blast furnace concept has been demonstrated during three campaigns at the LKAB Experimental Blast Furnace in Lulea Sweden. Following the success Of these trials, the construction of a demonstration unit is currently under progress.
引用
收藏
页码：31 / +
页数：6
相关论文
共 50 条
  • [41] Green power generation by exploiting the potential of blast furnace top gas
    Rose, Karsten
    Kriete, Wolfgang
    Hansen, Markus
    MPT Metallurgical Plant and Technology International, 2013, 36 (06): : 30 - 32
  • [42] Laser-based elemental analysis of the top gas of a blast furnace
    Brysch, A
    Sturm, V
    Noll, R
    Denecke-Arnold, H
    Brinkmann, H
    Mülheims, K
    Opfermann, A
    Mavrommatis, K
    Gudenau, HW
    Heinänen, K
    INTERNATIONAL SYMPOSIUM ON PHOTONICS IN MEASUREMENT, 2002, 1694 : 117 - 123
  • [43] Recycling of plastic waste in blast furnace
    Asanuma, Minoru
    Ariyama, Tatsuro
    Yamada, Yutaka
    Fujii, Mitsuhiro
    Okochi, Iwao
    Sumigama, Takashi
    Tokuda, Masanori
    Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 1998, 77 (05): : 423 - 431
  • [44] Recycling of waste plastics in blast furnace
    Asanuma, Minoru
    Ariyama, Tatsuro
    Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 2004, 83 (04): : 252 - 256
  • [45] BLAST-FURNACE TECHNOLOGY AT THE TOP
    ERICSSON, C
    JKA-JERNKONTORETS ANNALER, 1983, 167 (04): : 30 - 30
  • [46] ASSEMBLING A BLAST-FURNACE TOP
    PROKOPENKO, SP
    IOSILEVICH, ED
    MIRONOV, GM
    ESHCHIN, LD
    SOKOLOVSKII, BT
    METALLURGIST, 1982, 26 (1-2) : 46 - 47
  • [47] Quantitative Estimation of the Radial Distribution of the Gas Temperature at the Top of a Blast Furnace.
    Krol, Leszek
    Olek, Tadeusz
    Krzaklewski, Marian
    Hutnik Warszawa, 1984, 51 (09): : 314 - 317
  • [48] Failure Investigation of a Blast Furnace Top Gas Recovery Turbine: Chronology and Mechanism
    Kishore, Kaushal
    Das, Susovan
    Mandal, Himangshu
    Anand, Omji
    Mukhopadhyay, Goutam
    Adhikary, Manashi
    Kumar, Anup
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2020, 20 (04) : 1376 - 1387
  • [49] Failure Investigation of a Blast Furnace Top Gas Recovery Turbine: Chronology and Mechanism
    Kaushal Kishore
    Susovan Das
    Himangshu Mandal
    Omji Anand
    Goutam Mukhopadhyay
    Manashi Adhikary
    Anup Kumar
    Journal of Failure Analysis and Prevention, 2020, 20 : 1376 - 1387
  • [50] VALVE SYSTEM FOR BLAST FURNACE TOP GAS TURBINE GENERATOR PLANT.
    FUKATSU, GINICHIRO
    TANAKA, TATSUYUKI
    1982, V 59 (N 10): : 53 - 57
12345