Static and dynamic testing and modelling of aluminium joints with flow-drill screw connections

被引：27

作者：

Sonstabo, Johan Kolsto ^{[1
,2
]}

Morin, David ^{[1
,2
]}

Langseth, Magnus ^{[1
,2
]}

机构：

[1] Norwegian Univ Sci & Technol NTNU, Ctr Adv Struct Anal CASA, NO-7491 Trondheim, Norway

[2] NTNU, Dept Struct Engn, Struct Impact Lab SIMLab, NO-7491 Trondheim, Norway

来源：

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING | 2018年 / 115卷

关键词：

Flow-drill screw; Dynamic testing; Connection; Macroscopic; Component; BEHAVIOR; PANELS;

D O I：

10.1016/j.ijimpeng.2018.01.008

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A new component test suited for quasi-static and dynamic testing of flow-drill screw connections is presented. The component specimen was made of two different aluminium alloys, and included connections with two material combinations. Large-scale finite element simulations were carried out of each test, in which the connections were modelled with a constraint-based macroscopic model. An improvement of the connection modelling technique is presented. The model was calibrated to cross tension, cross mixed and single lap joint tests, and validated with peeling and the component tests.

引用

页码：58 / 75

页数：18

共 44 条

[31] Stretching the limits of dynamic and quasi-static flow testing on cohesive limestone powders
Shi, Hao
Lumay, Geoffroy
Luding, Stefan
POWDER TECHNOLOGY, 2020, 367 (367) : 183 - 191
[32] Investigation of Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets
Hong, Seung Hoon
Yan, Frank
Sung, Shin-Jang
Pan, Jwo
Su, Xuming
Friedman, Peter
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2016, 9 (03) : 746 - 750
[33] Water vapour adsorption on activated carbons: comparison and modelling of the isotherms in static and dynamic flow conditions
Vagner, C
Finqueneisel, G
Zimny, T
Weber, JV
FUEL PROCESSING TECHNOLOGY, 2002, 77 : 409 - 414
[34] A regionally-linked, dynamic material flow modelling tool for rolled, extruded and cast aluminium products
Bertram, M.
Ramkumar, S.
Rechberger, H.
Rombach, G.
Bayliss, C.
Martchek, K. J.
Mueller, D. B.
Liu, G.
RESOURCES CONSERVATION AND RECYCLING, 2017, 125 : 48 - 69
[35] Experimental and numerical investigations of aluminium-steel self-piercing riveted joints under quasi-static and dynamic loadings
Du, Zhanpeng
Wei, Baolv
He, Zhicheng
Cheng, Aiguo
Duan, Libin
Zhang, Guangya
THIN-WALLED STRUCTURES, 2021, 169
[36] Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets of Different Thicknesses
Pan, Jwo
Chen, Wei-Ning
Sung, Shin-Jang
Su, Xuming
Friedman, Peter
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2018, 11 (04) : 315 - 326
[37] Modelling and testing of 3D printed cellular structures under quasi-static and dynamic conditions
Kucewicz, Michal
Baranowski, Pawel
Stankiewicz, Michal
Konarzewski, Marcin
Platek, Pawel
Malachowski, Jerzy
THIN-WALLED STRUCTURES, 2019, 145
[38] Mechanical response of 6061-T6 aluminium alloy subjected to dynamic testing at low temperature: Experiment and modelling
Kopec, Mateusz
Liu, Xiaochuan
Gorniewicz, Dominika
Modrzejewski, Patryk
Zasada, Dariusz
Jozwiak, Stanislaw
Janiszewski, Jacek
Kowalewski, Zbigniew L.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2024, 185
[39] Failure Mode and Fatigue Behavior of Flow Drill Screw Joints in Lap-Shear Specimens of Aluminum 6082-T6 Sheets Made with Different Processing Conditions
Pan, Jwo
Chen, Wei-Ning
Sung, Shin-Jang
Su, Xuming
Friedman, Peter
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2018, 11 (04) : 327 - 340
[40] Evaluation of grit-blasting as a pre-treatment for carbon-fibre thermoplastic composite to aluminium bonded joints tested at static and dynamic loading rates
Ramaswamy, Karthik
O'Higgins, Ronan M.
Kadiyala, Ajay Kumar
McCarthy, Michael A.
McCarthy, Conor T.
COMPOSITES PART B-ENGINEERING, 2020, 185

← 1 2 3 4 5 →