Static and dynamic testing and modelling of aluminium joints with flow-drill screw connections

被引：27
|
作者：
Sonstabo, Johan Kolsto [1 ,2 ]
Morin, David [1 ,2 ]
Langseth, Magnus [1 ,2 ]
机构：
[1] Norwegian Univ Sci & Technol NTNU, Ctr Adv Struct Anal CASA, NO-7491 Trondheim, Norway
[2] NTNU, Dept Struct Engn, Struct Impact Lab SIMLab, NO-7491 Trondheim, Norway
来源：
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING | 2018年 / 115卷
关键词：
Flow-drill screw; Dynamic testing; Connection; Macroscopic; Component; BEHAVIOR; PANELS;
D O I：
10.1016/j.ijimpeng.2018.01.008
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A new component test suited for quasi-static and dynamic testing of flow-drill screw connections is presented. The component specimen was made of two different aluminium alloys, and included connections with two material combinations. Large-scale finite element simulations were carried out of each test, in which the connections were modelled with a constraint-based macroscopic model. An improvement of the connection modelling technique is presented. The model was calibrated to cross tension, cross mixed and single lap joint tests, and validated with peeling and the component tests.
引用
收藏
页码：58 / 75
页数：18
相关论文
共 44 条
  • [21] A study of dynamic testing of single solder joints and its application to finite element modelling
    Liu, J. F.
    Shim, V. P. W.
    Tan, V. B. C.
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2010, 45 (06): : 411 - 428
  • [22] Quasi-static and Dynamic Lap Shear Strength of Aluminium Joints Bonded with Epoxy/Alumina Nanocomposite Adhesive
    Gupta, Sunil Kumar
    Shukla, Dharmendra Kumar
    JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS, 2020, 6 (02) : 186 - 196
  • [23] Quasi-static and Dynamic Lap Shear Strength of Aluminium Joints Bonded with Epoxy/Alumina Nanocomposite Adhesive
    Sunil Kumar Gupta
    Dharmendra Kumar Shukla
    Journal of Dynamic Behavior of Materials, 2020, 6 : 186 - 196
  • [24] Field Test and Numerical Simulation for the Dynamic Response of Low-Strain Testing on Static Drill Rooted Pile
    Xiao S.
    Wang K.
    Zhang R.
    Wang M.
    Wang, Kuihua (zdwkh0618@zju.edu.cn), 1600, Shanghai Jiaotong University (54): : 406 - 412
  • [25] Prediction of load-displacement curves of flow drill screw and RIVTAC joints between dissimilar materials using artificial neural networks
    Kim, Jaeho
    Lee, Hyunjoo
    Choi, Heungjae
    Lee, Bora
    Kim, Dongchoul
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 57 : 400 - 408
  • [26] Shared mechanism between flow drill screw and friction stir welding and its impact on failure prediction of steel-aluminum joints
    Zhou, Qiaoying
    Yao, Zaiqi
    Xu, Congchang
    Zhou, Dayong
    Liu, Weixue
    Li, Luoxing
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 311
  • [27] Testing and modelling of annealed float glass under quasi-static and dynamic loading
    Osnes, Karoline
    Borvik, Tore
    Hopperstad, Odd Sture
    ENGINEERING FRACTURE MECHANICS, 2018, 201 : 107 - 129
  • [28] Testing and modelling of stiffened aluminium panels subjected to quasi-static and low-velocity impact loading
    Morin, D.
    Kaarstad, B. L.
    Skajaa, B.
    Hopperstad, O. S.
    Langseth, M.
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 110 : 97 - 111
  • [29] Technology of friction stir welding of aluminium alloy 6082 T-joints and their behaviour under static and dynamic loads
    Krasnowski, K.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2015, 46 (03) : 256 - 268
  • [30] Static and fatigue performance of non-circular rivet joints: Comparison between numerical modelling and preliminary testing
    Barroso, Alberto
    Sanchez-Carmona, Serafin
    ENGINEERING FAILURE ANALYSIS, 2024, 162
12345