Study of the influence of the cutting parameters on the chip geometry during machining alloy UNS A97075

被引：2

作者：

Sanchez, Y. ^{[1
]}

Trujillo, F. J. ^{[1
]}

Sevilla, L. ^{[1
]}

Marcos, M. ^{[2
]}

机构：

[1] Univ Malaga, Dept Mfg Engn, Dr Ortiz Gomez S-N, E-29071 Malaga, Spain

[2] Univ Cadiz, Fac Engn, Mech Engn & Ind Design Dept, E-11519 Cadiz, Spain

来源：

MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 | 2015年 / 132卷

关键词：

Turning process; Cutting parameters; Chip morphology; UNS A97075; ALUMINUM-ALLOYS;

D O I：

10.1016/j.proeng.2015.12.527

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes. (C) 2016 The Authors. Published by Elsevier Ltd.

引用

页码：513 / 520

页数：8

共 50 条

[41] Influence of cutting environment and machining parameters on the cutting force and surface roughness of slot milled Nimonic 263 alloy
S. Gowthaman
T. Jagadeesha
Multiscale and Multidisciplinary Modeling, Experiments and Design, 2022, 5 : 43 - 52
[42] Influence of cutting environment and machining parameters on the cutting force and surface roughness of slot milled Nimonic 263 alloy
Gowthaman, S.
Jagadeesha, T.
MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2022, 5 (01) : 43 - 52
[43] Effects of machining parameters and tool geometry on serrated chip formation, specific forces and energies in orthogonal cutting of nickel-based super alloy Inconel 100
Ozel, Tugrul
Ulutan, Durul
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (07) : 673 - 686
[44] Effects of irregular tool geometry and machining process parameters on the wavelength performance of process damping in machining titanium alloy at low cutting speed
Yusoff, Ahmad Razlan (razlan@ump.edu.my), 1600, Springer London (85): : 5 - 8
[45] Effects of irregular tool geometry and machining process parameters on the wavelength performance of process damping in machining titanium alloy at low cutting speed
Muhammad Adib Shaharun
Ahmad Razlan Yusoff
The International Journal of Advanced Manufacturing Technology, 2016, 85 : 1019 - 1033
[46] Effects of irregular tool geometry and machining process parameters on the wavelength performance of process damping in machining titanium alloy at low cutting speed
Shaharun, Muhammad Adib
Yusoff, Ahmad Razlan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (5-8): : 1019 - 1033
[47] Simulation and experimental studies to verify the effect of cutting parameters on chip shrinkage coefficient and cutting forces in machining of A6061 aluminum alloy
Thi-Hoa Pham
Thi-Bich Mac
Van-Canh Tong
Tien-Long Banh
Duc-Toan Nguyen
ADVANCES IN MECHANICAL ENGINEERING, 2016, 8 (10): : 1 - 11
[48] Experimental study and optimization of cutting parameters in machining of super alloy with hybrid ultrasonic method
Dipesh Popli
Meenu Gupta
Advances in Manufacturing, 2017, 5 : 199 - 216
[49] Measuring of cutting forces and chip shapes based on different machining parameters
Anicic, Obrad
Jovic, Srdjan
Camagic, Ivica
Radojkovic, Mladen
Stanojevic, Nenad
SENSOR REVIEW, 2018, 38 (03) : 387 - 390
[50] Experimental study and optimization of cutting parameters in machining of super alloy with hybrid ultrasonic method
Popli, Dipesh
Gupta, Meenu
ADVANCES IN MANUFACTURING, 2017, 5 (03) : 199 - 216

← 1 2 3 4 5 →