Study of the influence of the cutting parameters on the chip geometry during machining alloy UNS A97075

被引：2

作者：

Sanchez, Y. ^{[1
]}

Trujillo, F. J. ^{[1
]}

Sevilla, L. ^{[1
]}

Marcos, M. ^{[2
]}

机构：

[1] Univ Malaga, Dept Mfg Engn, Dr Ortiz Gomez S-N, E-29071 Malaga, Spain

[2] Univ Cadiz, Fac Engn, Mech Engn & Ind Design Dept, E-11519 Cadiz, Spain

来源：

MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 | 2015年 / 132卷

关键词：

Turning process; Cutting parameters; Chip morphology; UNS A97075; ALUMINUM-ALLOYS;

D O I：

10.1016/j.proeng.2015.12.527

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes. (C) 2016 The Authors. Published by Elsevier Ltd.

引用

页码：513 / 520

页数：8

共 50 条

[21] Study of the influence of cutting parameters on the Ultimate Tensile Strength (UTS) of UNS A92024 alloy dry turned bars
Gomez-Parra, A.
Puerta, F. J.
Rosales, E. I.
Gonzalez-Madrigal, J. M.
Marcos, M.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013), 2013, 63 : 796 - 803
[22] The study of the process of chip segmentation in case of edge cutting machining of titanium alloy
Ponyatov, Dmitry Sergeevich
Alekseev, Vyacheslav Petrovich
Khaimovich, Alexandr Isaakovich
INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2017), 2017, 129
[23] Preliminary study of the influence of machining conditions in the response to corrosion of UNS-A92024 alloy
Bienvenido, R.
Diaz Vazquez, J. E.
Botana, J.
Cano, M. J.
Marcos, M.
ENERGY AND ENVIRONMENT ENGINEERING AND MANAGEMENT, 2010, 107 : 117 - +
[24] Influence of Cutting Regime Parameters on Determining the Main Cutting Resistance during Polypropylene Machining
Prvulovic, Slavica
Mosorinski, Predrag
Josimovic, Ljubisa
Tolmac, Jasna
Djordjevic, Luka
Djurdjev, Mica
Bakator, Mihalj
Radisic, Branislava
Bajic, Dejan
POLYMERS, 2024, 16 (11)
[25] Effect of Grain Direction on Cutting Forces and Chip Geometry during Green Beech Wood Machining
Curti, Remi
Marcon, Bertrand
Denaud, Louis
Collet, Robert
BIORESOURCES, 2018, 13 (03): : 5491 - 5503
[26] Influence of machining parameters on cutting tool life while machining aluminum alloy fly ash composite
Rao, C. R. Prakash
Chandra, Poorna
Kiran, R.
Asha, P. B.
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2016), 2016, 149
[27] A study on the influence of cutting parameters on forces during machining the multiphase V-microalloyed steel
V Sivaraman
S Sankaran
L Vijayaraghavan
The International Journal of Advanced Manufacturing Technology, 2015, 79 : 1285 - 1292
[28] A study on the influence of cutting parameters on forces during machining the multiphase V-microalloyed steel
Sivaraman, V.
Sankaran, S.
Vijayaraghavan, L.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 79 (5-8): : 1285 - 1292
[29] CHIP FORMATION AND CUTTING PERFORMANCE INVESTIGATION ON TITANIUM ALLOY MACHINING
Lin, Shen-Yung
Cheng, Y. Y.
Chung, C. T.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1062 - 1072
[30] Optimisation of machining parameters for minimising cutting forces during machining of Al alloy SiC particle composites
Bhushan, Rajesh Kumar
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2022, 20 (02) : 372 - 386

← 1 2 3 4 5 →