Study of the influence of the cutting parameters on the chip geometry during machining alloy UNS A97075

被引：2

作者：

Sanchez, Y. ^{[1
]}

Trujillo, F. J. ^{[1
]}

Sevilla, L. ^{[1
]}

Marcos, M. ^{[2
]}

机构：

[1] Univ Malaga, Dept Mfg Engn, Dr Ortiz Gomez S-N, E-29071 Malaga, Spain

[2] Univ Cadiz, Fac Engn, Mech Engn & Ind Design Dept, E-11519 Cadiz, Spain

来源：

MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 | 2015年 / 132卷

关键词：

Turning process; Cutting parameters; Chip morphology; UNS A97075; ALUMINUM-ALLOYS;

D O I：

10.1016/j.proeng.2015.12.527

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes. (C) 2016 The Authors. Published by Elsevier Ltd.

引用

页码：513 / 520

页数：8

共 50 条

[1] Influence of Abrasive Waterjet Parameters on the Cutting and Drilling of CFRP/UNS A97075 and UNS A97075/CFRP Stacks
Ruiz-Garcia, Raul
Mayuet Ares, Pedro F.
Manuel Vazquez-Martinez, Juan
Salguero Gomez, Jorge
MATERIALS, 2019, 12 (01)
[2] Influence of Tool Wear on Form Deviations in Dry Machining of UNS A97075 Alloy
Trujillo Vilches, Francisco Javier
Martin Bejar, Sergio
Bermudo Gamboa, Carolina
Herrera Fernandez, Manuel
Sevilla Hurtado, Lorenzo
METALS, 2021, 11 (06)
[3] Parametric analysis of the Ultimate Tensile Strength in dry machining of UNS A97075 Alloy
Bermudo, C.
Trujillo, F. J.
Herrera, M.
Sevilla, L.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 81 - 88
[4] Tool Wear Mechanism in Cutting of Stack CFRP/UNS A97075
Raul Fernandez-Vidal, Severo
Fernandez-Vidal, Sergio
Batista, Moises
Salguero, Jorge
MATERIALS, 2018, 11 (08)
[5] Influence of the Axial Machining Length on Microgeometrical Deviations of Horizontally Dry-Turned UNS A97075 Al-Zn Alloy
Trujillo, F. J.
Sevilla, L.
Marcos, M.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013), 2013, 63 : 405 - 412
[6] Fatigue Behavior Parametric Analysis of Dry Machined UNS A97075 Aluminum Alloy
Martin Bejar, Sergio
Trujillo Vilches, Francisco Javier
Bermudo Gamboa, Carolina
Sevilla Hurtado, Lorenzo
METALS, 2020, 10 (05)
[7] Experimental Analysis of the Cutting Forces Obtained in Dry Turning Processes of UNS A97075 Aluminium
de Agustina, B.
Bernal, C.
Camacho, A. M.
Rubio, E. M.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013), 2013, 63 : 694 - 699
[8] OPTIMIZATION OF ANN USED TO PREDICT THE SURFACE ROUGHNESS IN DRY TURNING OF UNS A97075 AERONAUTICAL ALUMINUM ALLOY
Repiso-Lopez, Ignacio
Martin-Bejar, Sergio
Trujillo, Francisco Javier
Sevilla, Lorenzo
ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2023, 66 (05): : 317 - 326
[9] Surface roughness predictive model of UNS A97075 aluminum pieces obtained by dry turning tests based on the cutting forces
de Agustina, Beatriz
Maria Rubio, Eva
Angel Sebastian, Miguel
ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3, 2012, 217-219 : 1628 - 1635
[10] Parametric Analysis of Macro-Geometrical Deviations in Dry Turning of UNS A97075 (Al-Zn) Alloy
Martin Bejar, Sergio
Trujillo Vilches, Francisco Javier
Bermudo Gamboa, Carolina
Sevilla Hurtado, Lorenzo
METALS, 2019, 9 (11)

← 1 2 3 4 5 →