Milling as a method of surface pre-treatment of steel for adhesive bonding

被引：32

作者：

Rudawska, Anna ^{[1
]}

Reszka, Magdalena ^{[1
]}

Warda, Tomasz ^{[1
]}

Miturska, Izabela ^{[1
]}

Szabelski, Jakub ^{[1
]}

Stancekova, Dana ^{[2
]}

Skoczylas, Agnieszka ^{[1
]}

机构：

[1] Lublin Univ Technol, Fac Mech Engn, Lublin, Poland

[2] Univ Zilina, Fac Mech Engn, Zilina, Slovakia

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2016年 / 30卷 / 23期

关键词：

Surface treatment; mechanical treatment; milling; adhesive bonding; adhesive joints; SHEAR-STRENGTH; JOINT STRENGTH; ALUMINUM; ROUGHNESS; TITANIUM; COMPOSITES; ENERGY;

D O I：

10.1080/01694243.2016.1191585

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The paper analyses the impact of mechanical milling pre-treatment parameters on adhesive joint strength. Comparison of surface roughness of adherends after milling and its effect on adhesive joint strength is analysed in strength tests. The tests were performed on C45 structural steel specimens, which were subjected to machining at different parameters, with two types of milling cutters. Adherends were degreased prior to adhesive joining. Two types of end mills used in tests were NFPaf20 high-speed steel cutter and R390-020B20-11L indexable milling cutter. The machining was carried out at three cutting speeds: 0.05, 0.15 and 0.30 mm/tooth. Adherends were joined with an adhesive composition of Epidian 57 epoxy resin and Z-1 curing agent.

引用

页码：2619 / 2636

页数：18

共 50 条

[31] Surface treatment and analysis for adhesive bonding
Comyn, J., 1600, (10):
[32] Treatment of Steel Surfaces for Effective Adhesive Bonding
Teng, J. G.
Fernando, D.
Yu, T.
Zhao, X. L.
ADVANCES IN FRP COMPOSITES IN CIVIL ENGINEERING, 2010, : 865 - 868
[33] The pre-treatment of enamel surface in vitro with Er:YAG laser for bonding composite resin
Groth, E
Tanji, E
Zezell, DM
Matson, E
Eduardo, C
5TH CONGRESS OF THE INTERNATIONAL SOCIETY FOR LASERS IN DENTISTRY, 1996, : 53 - 57
[34] Surface hardening of IF steel by plasma nitriding: Effect of a shot peening pre-treatment
Manfridini, Ana P. A.
Godoy, Cristina
Wilson, J. C. Avelar-Batista
Auad, Marcos V.
SURFACE & COATINGS TECHNOLOGY, 2014, 260 : 168 - 178
[35] SURFACE PREPARATION OF A STAINLESS-STEEL FOR ADHESIVE BONDING
ALLEN, KW
ALSALIM, HS
JOURNAL OF ADHESION, 1977, 8 (03): : 183 - 194
[36] SURFACE PREPARATION OF STEEL FOR ADHESIVE BONDING AND ORGANIC COATINGS
VAZIRANI, HN
JOURNAL OF ADHESION, 1969, 1 (JUL): : 222 - &
[37] Effects of steel surface treatment with silanized carbon nanotubes on the bonding properties between steel and epoxy adhesive
Wang, Wanru
Xian, Guijun
JOURNAL OF ADHESION, 2023, 99 (02): : 297 - 319
[38] Influence of the water content in polyamide 6 on atmospheric pressure plasma jet pre-treatment and adhesion for adhesive bonding
Christoph J. A. Beier
Alexander Schiebahn
Uwe Reisgen
Discover Mechanical Engineering, 3 (1):
[39] SURFACE PRE-TREATMENT BY ULTRASONICS.
Anon
Finishing Industries, 1979, 3 (04): : 17 - 18
[40] Comparative Assessment of Different Pre-Treatment Bonding Strategies to Improve the Adhesion of Self-Adhesive Composites to Dentin
Ingles, Magali
Cruz, Joana Vasconcelos E.
Azul, Ana Mano
Polido, Mario
Delgado, Antonio H. S.
POLYMERS, 2022, 14 (19)

← 1 2 3 4 5 →