3D conducting nanostructures fabricated using direct laser writing

被引：66

作者：

Terzaki, Konstantina ^{[1
,2
]}

Vasilantonakis, Nikos ^{[1
,2
]}

Gaidukeviciute, Arune ^{[1
]}

Reinhardt, Carsten ^{[1
]}

Fotakis, Costas ^{[1
,3
]}

Vamvakaki, Maria ^{[1
,2
]}

Farsari, Maria ^{[1
]}

机构：

[1] Fdn Res & Technol Hellas FORTH, IESL, Iraklion 71110, Crete, Greece

[2] Univ Crete, Dept Mat Sci & Technol, Iraklion, Crete, Greece

[3] Univ Crete, Dept Phys, Iraklion, Crete, Greece

来源：

OPTICAL MATERIALS EXPRESS | 2011年 / 1卷 / 04期

关键词：

2-PHOTON POLYMERIZATION; PHOTONIC METAMATERIALS; MICROSTRUCTURES; SHRINKAGE;

D O I：

10.1364/OME.1.000586

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

We report the 3D structuring and metallization of a zirconium-based organic-inorganic photosensitive material doped with metal-binding tertiary amine moieties. The influence of the amine group content on the material structurability, the structure resolution and the metallization efficiency was examined. The silver plating technique was also optimized by investigating the metal seeding and reduction parameters. We have compared the silver plating vs. the metal bath techniques and we have found that while the metal bath technique gives good quality metal coatings, ohmic conductivity can only be obtained by silver plating. (C) 2011 Optical Society of America

引用

页码：586 / 597

页数：12

共 50 条

[1] 3D Biomedical Implants Fabricated using Direct Laser Writing
Schizas, C.
Melissinaki, V.
Gaidukeviciute, A.
Reinhardt, C.
Ohrt, C.
Dedoussis, V.
Chichkov, B. N.
Fotakis, C.
Karalekas, D.
Farsari, M.
[J]. ADVANCED FABRICATION TECHNOLOGIES FOR MICRO/NANO OPTICS AND PHOTONICS III, 2010, 7591
[2] Direct Laser Writing of 3D Nanostructures Using a 405nm Laser Diode
Mueller, Patrick
Thiel, Michael
Wegener, Martin
[J]. NANO-OPTICS: PRINCIPLES ENABLING BASIC RESEARCH AND APPLICATIONS, 2017, : 469 - 469
[3] Direct laser writing of 3D micro/nanostructures on opaque surfaces
Rekstyte, Sima
Zukauskas, Albertas
Purlys, Vytautas
Gordienko, Yuri
Malinauskas, Mangirdas
[J]. SILICON PHOTONICS AND PHOTONIC INTEGRATED CIRCUITS III, 2012, 8431
[4] Direct laser writing of 3D polymer micro/nanostructures on metallic surfaces
Rekstyte, Sima
Zukauskas, Albertas
Purlys, Vytautas
Gordienko, Yuri
Malinauskas, Mangirdas
[J]. APPLIED SURFACE SCIENCE, 2013, 270 : 382 - 387
[5] Glassy nanostructures fabricated by the direct laser writing method
I. I. Shishkin
K. B. Samusev
M. V. Rybin
M. F. Limonov
Yu. S. Kivshar
A. Gaidukeviciute
R. V. Kiyan
B. N. Chichkov
[J]. Physics of the Solid State, 2012, 54 : 1975 - 1980
[6] Glassy nanostructures fabricated by the direct laser writing method
Shishkin, I. I.
Samusev, K. B.
Rybin, M. V.
Limonov, M. F.
Kivshar, Yu. S.
Gaidukeviciute, A.
Kiyan, R. V.
Chichkov, B. N.
[J]. PHYSICS OF THE SOLID STATE, 2012, 54 (10) : 1975 - 1980
[7] 3D direct laser writing using a 405 nm diode laser
Mueller, Patrick
Thiel, Michael
Wegener, Martin
[J]. OPTICS LETTERS, 2014, 39 (24) : 6847 - 6850
[8] Direct writing of 3D microstructures using a scanning laser system
Yu, H
Gruntzig, A
Zhao, Y
Sharon, A
Li, B
Zhang, X
[J]. MICRO- AND NANOSYSTEMS, 2004, 782 : 455 - 460
[9] 3D Chiral Plasmonic Metamaterials Fabricated by Direct Laser Writing: The Twisted Omega Particle
Sakellari, Ioanna
Yin, Xinghui
Nesterov, Maxim L.
Terzaki, Konstantina
Xomalis, Angelos
Farsari, Maria
[J]. ADVANCED OPTICAL MATERIALS, 2017, 5 (16):
[10] Advantages of STED-Inspired 3D Direct Laser Writing for Fabrication of Hybrid Nanostructures
Vitukhnovsky, A. G.
Chubich, D. A.
Eliseev, S. P.
Sychev, V. V.
Kolymagin, D. A.
Selyukov, A. S.
[J]. JOURNAL OF RUSSIAN LASER RESEARCH, 2017, 38 (04) : 375 - 382

← 1 2 3 4 5 →